Polished Porcelain Tiles YC6A
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- T/T
- Min Order Qty:
- -
- Supply Capability:
- 100,000 Sqm Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Description of Our Polished Porcelain Tile :
800*800 full Polished porcelain tile
Specifications of Our Polished Porcelain Tile:
.Absorption rate:<0.5%
.Size:800x800mm
.Grade AAA
.CE&ISO9001
Features of Our Polished Porcelain Tile:
1.Superfine powder twice hedging penetration imitates"pearl"effects and has a kind of flowing effect.
2.The waving of tiny lines randomly spreads together with powder flowing field form natural petaline"pearl"effect.
3.Mulit-pipe ground color and multi-pipe grains combine;superfine powder multiple soft spreading creates natural piled up grains that are clear in gradation with strong 3D effects.
4.Adopts a kind of top stain-resisting technology,to form a special dense protective layer on tile surface and effectively fill the pores left after polishing and penetrate into tile body to closely integrate with tile body,thus put an end to any super stains from penetrating in.
Test Report of Our Polished Porcelain Tile:
TEST REPORT | ||||||
Item | Inspection Item | Unit | Provision of Standard | Test Result | Judgement | |
1
| SIDE | The deviation ,in percent of the average side for each tile from the work size. | mm | ±1.0 | +1.0 | Pass |
The deviation ,in percent of the average side for each tiel from the average size of the 10 test speciment . | % | ±0.4 | +0.01 | Pass | ||
Thickness | % | ±5 | +4.21 | Pass | ||
Straightness of sides | % | ±0.2 | +0.06 | |||
Rectangularity | % | ±0.2 | +0.05 | Pass | ||
Center curvature | % | ±0.2 | +0.05 | Pass | ||
Surfaceflatness | Edge Curvature | % | ±0.2 | +0.05 | Pass | |
Warpage | % | ±0.2 | +0.08 | Pass | ||
2 | Surface quality | / | A minimum of 95% of the tiles shall be free from visible defects that could impair the appearance of a major area of tiles | Pass | Pass | |
3 | Water Absorption(E) | Average value | ≤ 0.5 | ≤ 0.3 | Pass | |
Individual value | ≤ 0.6 | ≤ 0.5 | Pass | |||
4 | Breaking strenghth | N | Thickness ≥ 7.5mm,not less than 1300N | 2187.3 | Pass | |
5 | Modulus of Rupture | Average value | Mpa | 48.1 | Pass | |
Individual value | Mpa | 46.1 | Pass | |||
6 | Thermal shock resustance | / | Test method availuble after 10 times testing | Pass | Pass | |
7 | Mark(On the package) | Manufacturer logo or/and Origin | Pass | Pass | ||
Quality mark | Pass | Pass | ||||
surfacecharacter ,GL OR UGL | Pass | Pass | ||||
8 | lra | ≤ 0.5 | Pass | Pass | ||
Application of Our Polished Porcelain Tile:
- Q: Anyone know if that type of ceiling tile has asbestos? Unsure of the year built. It has a texture to it which is why I‘m worried about it.
- Like others have said it's imposable to tell without testing. Asbestos is very expensive to remove and the tile if left alone (kept sealed with paint) is safe.
- Q: Just how long the renovation of the new house, my home bathroom tiles on the ground as long as the bath will be seepage, the investigation of the pipeline without problems, leaks are no problems, where the problem? Urgent to be resolved.
- You say is the bath water up to it! This is because the water can not flow in time when the water or water from the wall tiles and seepage, the ground tile pavement is empty shop, so the water will go back! If it is water infiltration, it goes without saying that waterproof is not done!
- Q: Installing support bars on bathtub ceramic tile
- Pretty much what these guys said, but i would recomend using a masonry bit with a hammerdrill. I not only rotates the bit like a drill but also has a back and forth motion like a hammer hitting a nail. Makes it easier to drill and extends the life of the bits.
- Q: I am installing some mesh mounted 12x12 glass tiles sheets on one wall of my kitchen (behind the stove). I was reading online how to do it and I have a question. Some sites say to put the bottom tiles flush with the counter top and some sites say to use 1/8 spacers between the countertop and the bottom of the tiles and fill in with grout colored cauk. Which should I do? Thanks
- Definitely use the spacers and the grout caulk. By the way there is a product available that is not grout colored caulk but is actually grout caulk....it's sold at large tile stores, and is made for those areas that you're describing. The reason for using the grout caulk in that space is that there is always a certain amount of movement where the cabinet meets the wall. If there is no expansion joint which cushions that movement, something will break, and in your case it will probably be the glass tile.
- Q: standard shiny, white 4x4 tiles. I want to redo the bathroom stalls, but heard from some people that it could take forever, and that i might end up messing up the the drywall? to me it sounds simple... just get a spatula or something of the sort and scrape off the tiles... is that how it goes or is it more difficult than that? has anyone out there done this? what tools would i need? what type of tile cutter do you suggest? i‘d like to replace the tiles with something bigger... maybe 10x10 tiles?
- Being that your house is pretty new most likely the tiles are on drywall and set using latex glue. However if they were set using thinset cement on drywall it will be a little harder or if the builder used the older method and set the tiles in cement on wire mesh, then it's a beast and everything must come down. Using a stiff putty knife start at the top and tap the putty knife behind the tiles and gently pry away from the wall. You will have some damage to the drywall, apply drywall compound, let dry sand down and paint with primer. NOTE: Be sure to wear eye protection and gloves, broken tile is very sharp. Also protect your tub by installing a piece of plywood on top of it to prevent falling tiles from damaging it. It's also not a bad ideal to just tear out the drywall and tile and install new backer board. Maybe a little more work money but In the long run it will make for a much better job. If you are going to use that large of tile you really should tear it out and use the cement backer board and thinset as your glue as these tiles are heavy. Rent a wet saw to cut the tiles.
- Q: I am planning on laying down tile in my dining room and kitchen. I recently saw an offset pattern with 12x12 tiles and liked it. I‘ve now decided to go with the same offset pattern but with 20x20 ceramic tiles. Would I still have to find the center of the room and start tiling out from the center or can I just start at one wall and go from there since i‘ll be using the offset pattern? Thanks in advance.
- Regardless of the pattern layout, starting at the centre will leave an even margin of cuts around the edges. It also allows for the walls being not perfectly straight, or the the corners not being perfectly square. However,it is a good idea to lay a row of dry ties to make sure any cuts along the walls will not be too narrow.
- Q: My husband and I are building a new home. I would love to put ceramic tiling in my kitchen/dining room (they are combined). Do you think that 14‘X23‘ is too large for tiling? Its a concrete slap, and we will be doing the work ourselves. Any tips would be helpful!! I am looking for tips, suggestions, tools needed, extra supplies, ideas, horror stories, turned out good stories, I will take it all! Thanks so much!
- A quality tile saw will make things easier but understand going in that tile saws use water and make one hell of a mess. Plan to do your cutting outside (I speak from experience). Also expect that this job will take a LOT of time to complete. Plan your layout so that there are no tiny or thin slivers of tile where the walls meet the floors. Unless there's a good reason to do otherwise, be certain that your layout lines are perfectly parallel with the longest wall and are perfectly straight. You'll need a notched trowel (available widely and cheaply) to smooth out the adhesive/mortar. You'll need to be sure your subfloor is level, smooth and very clean. If it isn't smooth AND level, ask an expert for advice on how to correct it BEFORE you begin. If you are going to leave a space between tiles, you WILL need spacers (available at Lowe's, Home Depot and every hardware store). Above all, TAKE YOUR TIME. Tile is not a job to rush. You will look at this floor many times a day, every day for many years. The final result will be no better than the time and attention you devote to it. Most big box hardware stores have occasional classes in varying trades. Taking a tile class can't hurt.
- Q: We are renovating our bathroom and I don‘t want to take out the existing vanity just update it, we were considering tiling the countertop, can we go right over the existing laminate or should we remove the whole counter top, or is it possible to just take off the laminate?
- I tiled over the laminate in my kitchen by sanding the laminate with coarse sandpaper....priming with oil-based kilz-it and then tiled and grouted. It's still in the kitchen for over 7 years. You could also remove the countertop from the cabinet and replace with 1/2 plywood topped with 1/4 cement board but you would have to cut out the whole for the sink. Tiling over it is much easier. Just figure out your tile layout. I used 12 tiles for my custom countertop in my bathroom.
- Q: I need to put a 4 inch hole in a 16 inch ceramic tile.
- Drill a small hole, say 1/4 then useing a tile saw cut the large hole. Tile saws are availlable fro any DIY stor.
- Q: hi, we need to put tiles for a room of size 10x16 fts . we will be using 2x2 ft vitrified tiles. I want to know how many tiles are required and how the cost of tile is defined in shop. (price is for 1 piece or 1 sq feet ?)
- 10x16=160/(2x2)=160/4=40 tile you have 160 sq ft if they price it that way you need 40 tile if they price it that way If the tile come in 12 per box then divide 40 by 12 = 3.4 boxes which they most likely will make you buy 4 boxes (extra in case you break a couple. While doing the job, make sure you mix the tile out of the boxes so if there is a difference in color your floor will not show a change in color but will have the colors mixed across the floor..... Have fun
1. Manufacturer Overview
| Location | Foshan, China |
| Year Established | 2003 |
| Annual Output Value | Above US$ 20 Million |
| Main Markets | Aisa; Mid East; Eastern Europe; North America; South America |
| Company Certifications | ISO 9001 |
2. Manufacturer Certificates
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period |
3. Manufacturer Capability
| a) Trade Capacity | |
| Nearest Port | Foshan; Huangpu |
| Export Percentage | 25% - 30% |
| No.of Employees in Trade Department | 10-15 People |
| Language Spoken: | English; Chinese |
| b) Factory Information | |
| Factory Size: | Above 100,000 square meters |
| No. of Production Lines | Above 4 |
| Contract Manufacturing | OEM Service Offered; Design Service Offered |
| Product Price Range | Medium |
Send your message to us
Polished Porcelain Tiles YC6A
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- T/T
- Min Order Qty:
- -
- Supply Capability:
- 100,000 Sqm Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
