Ground Stabilisation Geogrids - High Tensile Plastic Polypropylene Biaxial Geogrid 4m*50m/Roll High for Road Construction
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 5000 Square Meters m²
- Supply Capability:
- 120000 Square Meters m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
High Tensile Plastic Polypropylene Biaxial Geogrid 4m*50m/Roll High for Road Consturction
1. Introduction of High Tensile Plastic Polypropylene Biaxial Geogrid 4m*50m/Roll High for Road Consturction
Plastic earthwork grid is a drawing of a square or rectangle of polymer mesh material, according to its manufacture different stretching direction can be unidirectional and bi-stretch. It is in the extruded polymer sheets (raw materials for PP or HDPE) punch, and heating purposes of directional stretch. Unidirectional grid only stretch along plate length direction, which is biaxially oriented grid continues to be one of the grid and then in the direction of its length vertical stretch.
Bx geogrid geogrids are polymers by extruding, forming, punching process after the vertical and horizontal stretch. The material in both portrait and landscape have great tensile strength, this structure in the soil can also provide a more effective commitment and spread the ideals of the chain-like system, adapted to large permanent hosted Foundation
2. Specification of High Tensile Plastic Polypropylene Biaxial Geogrid 4m*50m/Roll High for Road Consturction
Item: GG1515, GG2020, GG3030, GG4040
Polymer: PP
Roll width: 3.95m
Roll length: 50m per roll
Roll weight: 39kgs, 50kgs, 72kgs, 105kgs
Performance: Homogeneous structure, low creep, anti-aging and resisting acid & alkaline
3. Technical Data of High Tensile Plastic Polypropylene Biaxial Geogrid 4m*50m/Roll High for Road Consturction
Index Properties | Test Method | Unit | GG1515 | GG2020 | GG3030 | GG4040 |
MD TD | MD TD | MD TD | MD TD | |||
Polymer | -- | -- | PP | PP | PP | PP |
Minimum Carbon Black | ASTM D 4218 | % | 2 | 2 | 2 | 2 |
Tensile Strength@ 2% Strain | ASTM D 6637 | Kn/m | 5 5 | 7 7 | 10.5 10.5 | 14 14 |
Tensile Strength@ 5% Strain | ASTM D 6637 | Kn/m | 7 7 | 14 14 | 21 21 | 28 28 |
Ultimate Tensile Strength | ASTM D 6637 | Kn/m | 15 15 | 20 20 | 30 30 | 40 40 |
Strain @ Ultimate Strength | ASTM D 6637 | % | 13 10 | 13 10 | 13 10 | 13 10 |
Structural Integrity | ||||||
Junction Efficiency | GRI GG2 | % | 93 | 93 | 93 | 93 |
Flexural Rigidity | ASTM D 1388 | Mg-cm | 700000 | 1000000 | 3500000 | 10000000 |
Aperture Stability | COE Method | mm-N/deg | 646 | 707 | 1432 | 2104 |
Dimensions | ||||||
Roll Width | -- | M | 3.95 | 3.95 | 3.95 | 3.95 |
Roll Length | -- | M | 50 | 50 | 50 | 50 |
Roll Weight | -- | Kg | 39 | 50 | 72 | 105 |
MD denotes Machine direction. TD denotes transverse direction. | ||||||
4. Application of High Tensile Plastic Polypropylene Biaxial Geogrid 4m*50m/Roll High for Road Consturction
Make reinforce treatment for various kinds of soft soil foundation to evenly distribute load stress and reduce uneven settlement, not easy to generate
static elctricity, and flammability property good in the coal mine.
It is easy to wash coal, used in highway, railway, port, airport and municipal project.
support in the recovery working face of coal mine and roadway in the coal mine.
5. Photos of High Tensile Plastic Polypropylene Biaxial Geogrid 4m*50m/Roll High for Road Consturction
- Q: Can geogrids be used in reinforcement of dams and levees?
- Yes, geogrids can be used in the reinforcement of dams and levees. Geogrids are high-strength, synthetic materials that are specifically designed to improve the stability and strength of soils. They are commonly used in civil engineering projects, including the reinforcement of dams and levees, to enhance the structural performance and increase the overall safety of these structures. Geogrids can effectively distribute loads, reduce soil erosion, and improve the overall stability of the embankments, making them a suitable choice for reinforcement in dam and levee construction.
- Q: How are geogrids installed in construction projects?
- Geogrids are typically installed in construction projects by first preparing the ground surface and ensuring it is compacted and leveled. The geogrid is then laid out on the prepared surface and secured in place using stakes or anchor systems. It is important to ensure that the geogrid is properly tensioned and aligned to provide maximum stability and reinforcement. Finally, the geogrid is covered with additional layers of soil or other construction materials to complete the installation.
- Q: Why should the drainage pipe under the bottom of rubber dam be wrapped with geomembrane
- Why should the drainage pipe under the bottom of the rubber dam be wrapped with geomembrane?
- Q: Can geogrids be used for reinforcement in soft soils?
- Yes, geogrids can be used for reinforcement in soft soils. Geogrids are commonly used in geotechnical engineering to stabilize and reinforce weak or soft soils. They provide a stable and strong foundation by distributing the load and increasing the soil's shear strength.
- Q: How do geogrids reduce settlement in embankments?
- Geogrids reduce settlement in embankments by providing additional reinforcement and stability to the soil. They act as a high-strength reinforcement material, distributing the applied loads more evenly across the embankment. This helps to minimize the consolidation and settlement of the underlying soil, resulting in reduced settlement and improved overall performance of the embankment structure.
- Q: Can geogrids be used in retaining walls for highway sound barriers?
- Yes, geogrids can be used in retaining walls for highway sound barriers. Geogrids are commonly used in retaining walls to provide additional strength and stability by reinforcing the soil backfill. They can help prevent soil erosion and improve the overall performance and longevity of the retaining wall. In the case of highway sound barriers, geogrids can be used to reinforce the retaining wall structure and ensure its ability to withstand the lateral pressure caused by the barrier itself and the surrounding soil.
- Q: Can geogrids be used in bridge abutment construction?
- Yes, geogrids can be used in bridge abutment construction. Geogrids are commonly used to reinforce soil and provide stability in various civil engineering applications, including bridge abutments. They help distribute loads and improve the overall performance and longevity of the structure.
- Q: Can geogrids be used in soil reinforcement for load-bearing platforms?
- Yes, geogrids can be used in soil reinforcement for load-bearing platforms. Geogrids are commonly used in civil engineering projects to enhance the stability and strength of soil. By providing tensile reinforcement, geogrids distribute the load across a wider area, reducing settlement and preventing soil erosion. This makes them an effective solution for reinforcing soil in load-bearing platforms, increasing their load-bearing capacity and overall stability.
- Q: Why steel plastic geogrid in the test, will choose to peel out a single wire test? What are the causes and sources of this method
- Because the main force borne by the steel wire, if it is false, the consequences can be disastrous ah!
- Q: What are the specifications and models of Geotextiles and geogrids on the highway
- Steel plastic composite grille GS30-30 GS60-60 GS80-80 GS150-150 width 4-6m meters GS80-60 GS50-50;Glass fiber grille BJG35-35 BJG60-60 BJG80-80 BJG100-100 width 1-6 meters (BJG50-50);
1. Manufacturer Overview
| Location | 示范：Hebei, China |
| Year Established | 示范：1997 |
| Annual Output Value | 示范：Above US$50 Million |
| Main Markets | 30.00% South America; 20.00% North America; 15.00% Eastern Europe; 15.00% Southeast Asia; 10.00% South Asia; 5.00% Southern Europe; 5.00% Africa |
| Company Certifications | ISO 9001:2008 |
2. Manufacturer Certificates
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period |
3. Manufacturer Capability
| a) Trade Capacity | |
| Nearest Port | Tianjin；Qingdao;Shanghai |
| Export Percentage | |
| No.of Employees in Trade Department | 21-50 People |
| Language Spoken: | English；Chinese |
| b) Factory Information | |
| Factory Size: | Above 100,000 square meters |
| No. of Production Lines | Above 12 |
| Contract Manufacturing | OEM Service Offered；Design Service Offered |
| Product Price Range | High；Average |
Send your message to us
Ground Stabilisation Geogrids - High Tensile Plastic Polypropylene Biaxial Geogrid 4m*50m/Roll High for Road Construction
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 5000 Square Meters m²
- Supply Capability:
- 120000 Square Meters m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
