Glazed Porcelain Tile Sandstone series SA60L
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
Glazed Porcelain Tile Sandstone series SA60L is one of the most popular color of Crystal Jade Serie, which is one serie of Polished Porcelain Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.
Full glazed polished tiles are on the basis of the traditional polishing brick surface glazing and polishing products, whole set polished tile and glazed ceramic products archaize brick both advantages in one, not only glaze as smooth as polished tile brightening.
Product Features
Competitive price
Standard export packing: Pater Carton+ Wooden Pallet
Fast delivery
OEM service could be offered
Marketing support on samples, catalogues as well as carton designing
Professional sales team for product, document and schedule of importing and exporting.
Product Specification
Tile Type: Polished Porcelain Tile
Quality standard: GB/T4100-2006, ISO13006, ISO9001
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Rupture Modulus: 》40 MPa
Length and Width Tolerance: ±0.1%
Surface Smoothness: ±0.15%
Edge Straightness: ±0.15%
Wearing Strength: 《1600 mm3
Glossiness: 》 85 Degree
Resistance to Chemical: Class UA
Resistance to Staining: Class 3.
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl
Production Line & Package
FAQ
1. Q: May I have my own design?
A: Of course. But the pictures or samples of the products should be offered by your party.
2. Q: May I ask for some samples?
The samples are free. You just need to pay for samples’ courier cost.
3. Q: Can floor tile be used on the wall?
A: Yes. Exterior applications require special precautions and installation methods. Please check with your installer.
4. Q: What are your payment terms?
T/T: 30% deposit and the balance should be paid before loading to container.
L/C: L/C AT SIGHT.
5. Why choose our Floor Tile?
1). Less investment and shorter lead time because we ship tiles directly from Factory.
2). Better ETD and more stable price bacause we keep abundant stock for future needs.
3). Experienced service because we have an experienced team and we could send our experienced engineer for guving useful instruction on your jobsite.
4). Better warranty of products because we enjoy a reputation and we have got varies certificates and awards for our products.
- Q: hey guys my house just got renovated a few days ago... it seems like some tiles have tough stains on it. is there a type of detergent or anything that removes it off? it looks well ugly and makes the surface rough... it's on both my floor and wall tiles
- i dont think you are going to be able to do this and still maintain the glossiness of the tile but i would brush on a 50/50 mix of muriatic acid and water and scrape off the big blobs with a putty knife ...then take a stiff brush to it...rinse well...
- Q: does any one know where to find any harvest gold bathroom tiles?? it was a color that was big in the 70‘s but it is almost impossible to find it now in stores..does anyone know of any stores or webites that sell them please let me know i need them for replacements
- Harvest Gold Bathroom
- Q: How to calculate the loss of tiles
- Number of wall tiles algorithm: 800 tiles Square number * 1.6 + 1 ~ 2 = quantity (plus loss) 600 tiles Square number * 2.78 + 1 ~ 2 = quantity (plus loss) Toilet kitchen ground Specifications: 300 * 300 square number * 11 + 1 ~ 2 = quantity (plus loss) Bathroom kitchen wall tiles Specifications: 300 * 450 square number * 7.4 + 1 ~ 2 = quantity (plus loss) Specifications: 300 * 600 square number * 5.5 + 1 ~ 2 = quantity (added loss) Specifications: 250 * 330 square number * 12 + 1 ~ 2 = quantity (plus loss Waistline Specifications: 30 * 30 weeks long * 3.3 * 5.5 = quantity (plus loss) Under normal circumstances we still have to look at the specific size of the number of units to calculate the loss of these generally when you buy tiles when the Purchasing Guide will be specific for your account
- Q: I want to use the tiles for a back splash in the kitchen. Is there a reason I have to use the spacers? Why can‘t I put them where they are touching each other? I‘m not using them on a floor. I don‘t like the look of the space between the tiles.
- you need some space in between for the grout because in the long run it will make it more durable. when you lay your tiles, they need to cure/dry before you apply your grout making sure they won't be moving around. simple as that!
- Q: 1 package tiles can paste the number of square brick
- The amount of tiles used, there are two main factors: First, the roughness of the base surface, the second is the use of smear tools. The more flat surface, the use of the less. Toothed scraper is the best tool for the construction of ceramic tile, the smaller the mouth, the smaller the amount. In the relatively flat base, De Gao's technical engineers measured, 6mm wide and 6mm deep tooth-shaped scraper dosage of about 3.5kg / ㎡, 10mm wide and 10mm deep tooth-shaped scraper dosage of about 5kg / ㎡, 12mm wide 12mm deep tooth scraper dosage is about 7kg / ㎡. To Tak Tak tiles common 20Kg package count, you can paste 3 to 7 square meters. Should pay attention to the big mouth is to paste a large tile, heavy brick, ordinary home decoration, with a small mouth of the scraper on it.
- Q: I need to take a tile that is on the wall under my bathroom sink cabinet to use it to replace some visible tiles. I know it‘s possible to remove the old damaged tiles, but obviously I don‘t want to damage the ones that I‘m going to use to replace the bad ones.
- Have done just that. Could not find (or take the time ) to find matching tile. Borrowed tiles from behind cabinet base to patch wall . Grout saws as mentioned are OK. Had better luck w/ a serrated steak knife because of thinner blade. Started in area where drain entered the wall broke one to get things moving. Mastic was used to hold tile to wallboard used a heat gun Guess a hair dryer would do. Once I got movement (prying w/ knife) it was nervous work but I got what I needed. Cleaned edges backs of the transplant tiles used construction adhesive to reset. Used some mismatched tiles to replace old ones just to even up the wall. Take your time. Best regards
- Q: I‘m looking to re-tile my kitchen... I would like to get good quality tile, at a good price. Can I trust tile purchased at any particular large hardware chain, or should I seek out a specialty flooring store? Or does it even matter that much - is tile just tile?
- Just ask the sales person what the PEI rating is. This is a universal rating scale used to judge the hardness and durability of ceramic and porcelain tiles. The scale runs from 1 to 5 with five being the hardest. In a high traffic area, like a kitchen, please don't use anything below a 3. 1 and 2 ratings have the weakest finish on the market, these will be any tile that's between $0.50 and $1.50 per square foot, at least in the Mid-west. please make sure that your tile is installed on concrete or concrete board. otherwise, it WILL crack up on you. Good Luck!!
- Q: The shiny surface ceramic tile is set unto a cement slab - it has been there 15 years or more with no cracks. Do I need to rough up the surface before I set the tile- if so how? I have tried sanding it (60 grit), wire brushing it - there is no effect on the surface. Also I live in a small town - we do have a Home Depot - do they sell a good bonding agent? If so what? Thank-you for your answer!
- I have tiled porcelain over ceramic with long term results. make certain the surface is clean and free of any foreign matter, also use the best modified thin set available and u can also add a latex additive for added strength to the thin set.
- Q: Classification of tiles?
- 3, glazed tiles: in the embryo body surface made of glaze firing. The main body is divided into two kinds of pottery and porcelain body. Made of clay on the back of the red, porcelain clay fired on the back of the gray. Glazed tile surface can do all kinds of patterns and patterns. More colorful than the polished tiles and patterns. Because the surface is glaze, so wear resistance than polished tiles and tiles. In addition to the size of the identification of glazed tile depends on the water absorption. Generally good brick press good, high density, high firing temperature, water absorption is also small. Glazed tiles are generally used in kitchens and toilets. Rich color patterns, good anti-skid performance. Glazed tiles are generally not very large, but can be very small, such as mosaic. The current home improvement of about 80% of buyers choose this brick for floor decoration materials. 4, antique brick: not China's ceramic industry's products, is introduced from abroad. Antique tiles are evolved from glazed tiles, essentially glazed porcelain tiles. Compared with ordinary glazed tiles, the difference is mainly reflected in the color of the glaze above, antique tiles are ordinary tiles, and the disk is basically the same, the so-called antique, refers to the effect of brick, antique effect should be called tiles, Antique brick is not easy to clean. The only difference is in the firing process, the antique brick technical requirements are relatively high, thousands of tons of hydraulic press after pressing, and then by thousands of high temperature sintering, to its high strength, with a strong wear resistance, carefully developed Antique tiles both waterproof, non-slip, corrosion-resistant features. Antique brick imitation of the past style to do the old, with a unique charm with classical people to attract people's eyes, to reflect the vicissitudes of life, the history of heavy, antique brick through the style, color, pattern, to create a nostalgic atmosphere.
- Q: Hot tubs are in ground swimming pools are some times surrounded by border of tiles. The square hot tub has a side of length s feet. The tub is surrounded y a border tiles. Each square tiles measure 1 ft.to find the tile you have to use this: 4(s+1) now how is that expression same to (s+2)^2-s^2
- (s+2)? - s? = (s? + 4s + 4) - s? = 4s + 4 = 4(s+1).
Send your message to us
Glazed Porcelain Tile Sandstone series SA60L
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
