Gasket Rubber Ring EPDM DN250 on Sanitary
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Description of Gasket :
Ginseal Spiral-wound gaskets comprise a mix of metallic and filler ma- terial. Generally, the gasket has a metal (normally carbon rich or stainless steel) wound outwards in a circular spiral (other shapes are possible) with the filler material (generally a flex- ible graphite) wound in the same manner but starting from the opposing side. This results in alternating layers of filler and metal. The filler material in these gaskets acts as the sealing element, with the metal providing structural support.
2.Features of Gasket :
• Wide range of applicable working condition,high temperature and high pressure resistance,applicable to super low temperature and vacuum condition.Chemical resistant gasket is available under various medium,through change of composition of gasket.
• Strong stress compensation,stable and reliable sealing performance even under frequent pressure fluctuation condition.
• Perfect sealing performance.
• Normal requirement of flange surface finishing which contact with gasket.
• Easy installation and low pre-tightening stress of gasket.
3.Gasket Images:
4.Specifications of the Gasket:
• We can produce according to your samples, design or specification.
• Reasonable Price, Prompt Delivery, Quality Assurance, considerate service.
• We also can design and manufacture rubber mold and rubber products by ourselves. Yes, you can get the High quality and best price.
• We value every customer and every order be it one piece or thousands.
• To get more details and any questions, please feel free to contact us. We are always ready to provide you the quality service.
5.FAQ
Ask 1: Why some supplier give me the price much cheaper than you?
Answer:1.They wanna attract your attention,while you contact with them,they would raise the price by any reason.
2.They willn't provide the high qualities to you cause it had the cheap price.
Ask 2:What the MOQ?
Answer:The MOQ should reach 800 kilograms
Ask 3:Should i pay for it If some product need molds?
Answer:I'm afraid you should pay for it,However,We would return it back when we get the first order.
Ask 4:What's the delivery circle times ?
Answer:About 2 weeks and we would give the accurate time when we know the quantity.
Ask 5:What's the FOB port?
Anser:Our port are Shanghai and Ningbo usual.
- Q: Which is better waterproof performance, neoprene or silica gel?
- Chloroprene rubber and chloroprene rubber, chloroprene rubber is Xinping (i.e. 2-, -1,3- chloride butadiene) as the main raw material for the polymerization of alpha elastomer. Neoprene should be stored in a cool, ventilated, dry warehouse. Do not stress it to prevent it from being laid. It is widely used in weather resistant products, viscose soles, paints and rocket fuels.
- Q: What solvent is used to clear the melted rubber layer?
- Dry glue in water does not exceed 1%, in the process can be volatile, but the moisture content is too long, will not only make the rubber easy to mildew during storage, but also the impact of rubber processing, such as mixing with the agent is easy to agglomerate; easy to blister calendering and extrusion process, the bubble or a sponge the curing process etc..
- Q: How do soft silicone rubber print?
- Replace the thermal grease (thermal paste) and mica (insulation) products two yuan of cooling system. The thermal conductivity of this product is 0.5-5.0W/mK, while the thermal conductivity of air is only 0.03w/mk. The resistance to breakdown is above 3000 volts, and insulation requirements can be used in most electronic devices.
- Q: Is mixed silicone rubber dangerous?
- Mixed silicone rubber silicone rubber is the synthesis of silicone rubber crosslinking agent + + + + auxiliary catalyst filler in the double roller mixer or a sealed kneading machine.
- Q: What is the lowest cost material for the synthesis of rubber?
- Polypropylene ethylene propylene rubber, ah, as if a few domestic, oh, raw materials are not expensive, but the technology is difficult, but it is very simple to say, on the two synthetic. Jilin Petrochemical made decades of synthesis, products or not like us.
- Q: How to solve the exhaust problem in rubber vulcanization process
- Rubber vulcanization process is a process of high temperature, temperature control, temperature will have material evaporation, products not dense gap, excess glue extrusion emissions, sulfide gas release of many factors such as rubber vulcanization requirements must exhaust can produce qualified products.
- Q: How can there be a crack in the rubber ring?
- Problems in production:1) formulation design, oil or resin less material or caused by excessive or high temperature, poor liquidity and other reasons!2) when manufacturing, the product appears the hole which the exhaust is not good3) the raw material is too thick during production, and cracks are also caused.
- Q: How to make rubber products keep brightness for a long time?
- Keep it in the right place: ventilated, dry place, not squeezed
- Q: What is the temperature of ordinary silicone rubber resistant to low temperature?
- Because the molecular structure of silicone rubber is amorphous, the temperature has little influence on its properties, and it has good cold resistance. The brittleness temperature of the general organic rubber is from -20 DEG C to -30 DEG C, while the brittleness temperature of the general silicone rubber is between -60 and -70 degrees centigrade. When the rubber is introduced in 7.5 (mol)% phenyl, brittle temperature of silicone rubber can be reduced to -115 DEG C, remain elastic at -90 DEG C and can use.
- Q: How to distinguish between plastic products and rubber products, toys?
- There are several ways to distinguish between plastic and rubber products:1, color: plastic products, relatively transparent color, relatively strong, and rubber products are relatively poor transparency;2, thickness: plastic product thickness than rubber products thin;3 hardness: general plastic products than rubber products slightly hard;4: texture: plastic products are more smooth or microstrip lines, and rubber products on the surface of some of the same as human skin, texture deeper or more rough;5, taste: plastic taste, the taste of micro strip plastic, and rubber products are micro rubber rubber flavor;6, weight: general plastic products will be slightly lighter than rubber products.
Send your message to us
Gasket Rubber Ring EPDM DN250 on Sanitary
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
