Full Polished Glazed Porcelain Tile 600 YDL6A255
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
FULL POLISHED GLAZED PORCELAIN TILE 600 YDL6A255 is one of the most popular color of Glazed Porcelain Serie, which is one serie of Polished Porcelain Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.
Product Features
Polished Porcelain Tile, Double Loading
Only Grade AAA available
OEM service could be offered
Marketing support on samples, catalogues as well as carton designing
Professional sales team for product, document and schedule of importing and exporting.
Product Specification
Tile Type: Polished Porcelain Tile
Quality standard: GB/T4100-2006, ISO13006, ISO9001
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Rupture Modulus: 》40 MPa
Length and Width Tolerance: ±0.1%
Surface Smoothness: ±0.15%
Edge Straightness: ±0.15%
Wearing Strength: 《1600 mm3
Glossiness: 》 85 Degree
Resistance to Chemical: Class UA
Resistance to Staining: Class 3.
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl
For 800x800mm, 3pcs/Ctn, 28 Ctns/Pallet, 616 Ctns/20’Fcl, 1182.72m2/20’Fcl
Production Line & Package
FAQ
1. For Polished Porcelain Tile, is the 30*60 available?
—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 6 pcs are packed into one carton.
2. What is the MOQ for this tile?
—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.
3. Can we use the carton with our own design and brand name?
—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers, due to the carton factory can’t arrange production if quantity is below 5000 pcs.
- Q: I am replacing a floor furnace and may need to replace some tiles. These are nominally size 11-1/2 x 11-1/2 x 1/2 inch. Thanks.
- ooooh, good luck. Do you have a building material salvage company in your area? People who buy the fittings, etc in old buildings before demo. or remodeling.......are probably your best, if not only bet.
- Q: I am trying to decide between installing hardwood or tile floors in my kitchen remodel. Any thoughts on pros and cons of each? Thanks.
- have had both - loved my marble tile floor for cleaning and appearance it always looked great. HATED my white ceramic tile floor - showed absolutely everything and had to be cleaned constantly and was very hard on the back. love love LOVE my factory finished hickory wood floors now. They are so nice in bare feet, look good even when they are dirty and are a breeze to clean. Gotta have the rug by the fridge and the sink though.
- Q: How many squares are tiles?
- According to the size of the tile and the number of packages
- Q: I need either of two types of tile one was a sheet of multicolor mosaic tiles the other is a creamy colour with a beige sort or swirly thing going through it
- Matching dis-continued tile can be a big problem..This is why whenever I do a tile job I leave extra or open boxes behind...The only thing i can say is check every tile store you can find.....Perhaps one has an odd lot left of leftovers...If you know who made the tiles that would help the search....If you E-mail me a photo to my profile I will take a look around my area when I am at the tile stores...Usually shipping can be arranged.
- Q: I‘m going to install a porcelain tile floor. My question is when I install a tile up against a cabinet that people can see. Should I but the tile up against the cabinet or should I leave enough space to grout between the tile and the cabinet. Just wondering what the standard practice is , and what looks the best. Also I have a small crack in the concrete, which the tile company said it was so minor that not to worry about it. Although it caused a crack in my old tile that was originally installed. I would really like to prep the crack prior to installing the new tile. What would you recommend doing to prep the crack. Thanks
- Install okorder / As far as looks of tile spacing, stay consistent. If you border uptight against one non-tile stuff, then do so against everything. Use either colored caulking or epoxy grout for corners. Cement based grout isn't flexible and will crack.
- Q: Sanding parquet floor tiles, advice please.My hall floor is covered in parquet tiles.The tiles themselves are made up on 1 inch by 5 inch sections, 5 to a tile.The tiles are laid so that the grain on the tiles is alternate and opposite its neighbour. So the grain on some go North-South, the next in line goes East-WestMy sander has a face larger than any one tile.Do I have to sand along the grain, in which case I‘d have to buy a tiny grinder, or can I just sand all over the tiles and not bother about sanding along the grain? Assuming I have sanded, how do I seal the completed job? Varnish?
- First okorder / wood finish. It ain't cheap but you will be able to add new coats of finish later on without having to completely refinish the whole floor. You can rent a 'square sander' from Home Depot for abut $40 a day. It uses 4 six inch disk type sand paper. It doesn't dig in when started which allows a first time DIY person to do a good job. You move it around by putting pressure on the handle, real easy to use. Takes longer than a belt sander but you won't make mistakes. Make sure when you rent it that you get different size paper AND that they will stick (like velcro) to the sander unit face. You don't want to get home, start to use it and the sand paper disks fall off!! Had that happen with one. If you have a large floor to do rent the sander around 3 pm. You get 24 hours so you can sand from 3-11pm, go to bed, then start over in the morning. Otherwise you have to work from morning to evening. Makes for a long day.
- Q: i will be laying tiles o my bathroom floor and i am wondering if HomeDepot or Lowes do the tile cutting. i dont want to purchase the wet saw. i will need to cut tiles for corners and things like that. Thanks.
- My Lowes in Chantilly, VA cuts tiles. Just had a couple cut yesterday. They do not want to cut tiles that they did not sell to you though since they cannot replace if the tile cracks or they cut it badly. However, if you assure them that you have spares and won't hold them responsible if the tile cracks or cut is bad they will do for you.
- Q: A roof tile falls off the roof of a house. An observer inside the house notices that the tile took 0.2 s to pass a 1.6 m window of the house. If the tile feel from rest, how far above the top of the window did it fall from? Give your answer in meters, recall that this is height above the window and has a positive sign, do not enter units.
- Average velocity of tile in falling past window = 1.6/0.2 = 8m/s This is the instantaneous velocity of the tile half way down the window in time. This means that the tile had a velocity of 8m/s 0.1 sec after it reached the top of the window. How long does it take a falling body to attain velocity of 8m/s, v = u +at 8 = 0 + 9.8t t= 8/9.8 t = 0.816sec 0.816 - 0.1 = 0.716 seconds Therefore it reached the top of the window in 0.716 seconds. How far must the tile fall to attain a velocity of 0.716 sec? s = ut + ?*a*t? s = 0 + ?*9.8*0.716? s = 2.5m The tile fell from height 2.5m above the top of the window.
- Q: i don‘t even know how to explain what i want to ask.. but here i go....how do you make sure they come out straight. i know how to lay them but how do you make sure the second row comes out straight at the other end. I guess i need help lining them. chalk line will help but how do i do it. is there a website or video that may help me. ((( i lay down the first row along the chalk straight line. i then lay down one half tile at the end of the first tile row. then i continue with the full tile so i can get a staggered look. but how do i make sure that the second row is dead on? help if you can thanks. also if you have any other advice for laying staggered floor tile let me know. thanks.20x20 Porcelain floor tile.
- For the best answers, search on this site https://shorturl.im/awfzh The tiles should be the same size or in a pattern such that you can off set the joints and still have the tilegrout lines still line up. Or some of them you can both off set the joints and do a offset or brick pattern in the laminate itself. This type of laminate you ll need more than normal scrap because you will scrap more out on this type of laminate. Any questions you can e mail me through my avatar, I ve attended several installation seminars as well as installed a few 100,000 s/f.. GL
- Q: How are these tiles differ from each other and how to identify these?
- Porcelain okorder /
Send your message to us
Full Polished Glazed Porcelain Tile 600 YDL6A255
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
