Anti-Corrosive Fiberglass Geogrid Earthwork Geocells for Sale
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50000 m²
- Supply Capability:
- 200000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Fiberglass Geogrid Earthwork Coated with Anti-corrosive
Description Of Fiberglass Geogrid Earthwork Coated with Anti-corrosive:
Fiberglass geogrid is a kind of new favorable earthwork base material to strengthen the road surface and roadbed.This product is made by weaving and covering fiberglass filament. It is featured by high vertical and horizontal tensile strength,low unit extension, high flexibility, and favorable high and low temperature resistance.The products after surface covering own the favorable property of alkali resistance and aging resistance. It is used widely to increase the asphalt road surface, concrete road and roadbed (both soft and hard road surfaces).Compared with the traditional road surface, it reduces the cost, prolong the service life, and avoid the reflection road crackle.This product is also used to strengthen the soft land, such as railway, airport, irrigation work, and dyke, etc, and the roadbed.
Main Features of Fiberglass Geogrid Earthwork Coated with Anti-corrosive:
(1)High tensile strength in both the vertical and horizontal directions;
(2)Low elongation;
(3)Excellent temperature ;
(4)Good anti-age and alkali-resistance;
(5)Reduce construction cost, extend service life of road and prevent deflection cracks.
This product is formed by weaving and covered with aphalt or PVC.
Specifications of Fiberglass Geogrid Earthwork Coated with Anti-corrosive:
Tensile Strength (KN) | Warp | >30 | >50 | >60 | >80 | >100 | >120 | >150 | >200 |
Weft | >30 | >50 | >60 | >80 | >100 | >120 | >150 | >120 | |
Elongation(%) | <4< p=""> | <4< p=""> | <4< p=""> | <4< p=""> | <4< p=""> | <4< p=""> | <4< p=""> | <4< p=""> | |
Mesh Size(mm) | 25.4*25.4 | 25.4*25.4 | 25.4*25.4 | 25.4*25.4 | 25.4*25.4 | 25.4*25.4 | 25.4*25.4 | 25.4*25.4 | |
Elastic Modulus | 76 | 76 | 76 | 76 | 76 | 76 | 76 | 76 | |
Width(m) | 1~6 | 1~6 | 1~6 | 1~6 | 1~6 | 1~6 | 1~6 | 1~6 | |
Length(m) | 50~300 | 50~300 | 50~300 | 50~300 | 50~300 | 50~300 | 50~300 | 50~300 | |
Temperature Resistant(℃) | -100~280 | -100~280 | -100~280 | -100~280 | -100~280 | -100~280 | -100~280 | -100~280 | |
Resin Content (%) | 18~20 | 18~20 | 18~20 | 18~20 | 18~20 | 18~20 | 18~20 | 18~20 | |
Glue Type | Bitumen PVC SBR soakage | Bitumen PVC SBR soakage | Bitumen PVC SBR soakage | Bitumen PVC SBR soakage | Bitumen PVC SBR soakage | Bitumen PVC SBR soakage | Bitumen PVC SBR soakage | Bitumen PVC SBR soakage | |
Applications of Fiberglass Geogrid Earthwork Coated with Anti-corrosive:
1.It reinforced old asphalt concrete road surface and asphalt surface layer ,and prevents damage
2.It is used for rebuilding cement concrete road surface into composite road surface and restraining reflection caused by block contraction
3.It is used inroad expansion and improvement project and crack by old and new combination position and uneven sedimentation
4.It is used in soft soil base reinforcement treatment ,is favorable for soft soil water separation and concretion ,restrains sedimentation effectively ,distributes stress uniformly and improve overall strength of road base
5.It is used for preventing contraction crack caused by new road semi-rigid base layer , and reinforcing and preventing road
surface crack caused by foundation crack reflection .
IMages of Fiberglass Geogrid Earthwork Coated with Anti-corrosive:
FAQ of Fiberglass Geogrid Earthwork Coated with Anti-corrosive:
1. What are we supplying?
We are specialized in producing Geosynthetic materials, like Geogrid Series, HDPE Geocell, Geonet, Geotextile, Geomat, Tri Denmensional Composite Grainage Geonet, and Geomembrane Series.
.
2. How Many years experience do we have?
We have been exported to more than 20 countries in the past 15 years.
3. How long do we usually reply your request?
We always reply our customer within 24 hours.
- Q: Can geogrids be used in reinforcement of dams and levees?
- Yes, geogrids can be used in the reinforcement of dams and levees. Geogrids are high-strength, synthetic materials that are specifically designed to improve the stability and strength of soils. They are commonly used in civil engineering projects, including the reinforcement of dams and levees, to enhance the structural performance and increase the overall safety of these structures. Geogrids can effectively distribute loads, reduce soil erosion, and improve the overall stability of the embankments, making them a suitable choice for reinforcement in dam and levee construction.
- Q: Are geogrids compatible with different soil types?
- Yes, geogrids are generally compatible with different soil types. Geogrids are designed to enhance soil stability and improve load-bearing capacity, making them suitable for use in a variety of soil conditions including clay, sand, and gravel. However, the specific design and selection of geogrids may vary depending on the soil type and intended application.
- Q: What are the design considerations for geogrid-reinforced slopes?
- Some of the design considerations for geogrid-reinforced slopes include the type and strength of the geogrid material, the slope angle, soil properties, and the expected load and traffic conditions. The design also needs to account for factors such as water drainage, vegetation, and long-term stability. Additionally, proper installation techniques and quality control measures should be considered to ensure the effectiveness and durability of the geogrid reinforcement system.
- Q: Details of fiberglass geogrid
- 2, anti fatigue crackIn the old cement concrete pavement asphalt overlay, its main function is to improve the use function of the road, and the contribution to the bearing capacity is not big. The asphalt overlay on the old asphalt concrete pavement is different, and the asphalt overlay will be combined with the old asphalt concrete pavement. Therefore, the asphalt overlay on asphalt concrete pavement, in addition to the emergence of reflective cracks, but also because of the long-term effects of fatigue cracks. We overlay load do stress analysis of old asphalt concrete pavement and the asphalt because of asphalt overlays under flexible surface cover layer of the same nature and the asphalt surface, when subjected to loads, road surface deflection will occur. The surface layer under pressure in direct contact with the wheel of the wheel load in asphalt overlay, the outside edge of the area, the surface layer by force, due to the two force regional force are different in nature, and close to each other, so in the junction of two force area is prone to damage force mutation. Fatigue cracking occurs under the action of long term loads.Fiberglass geogrid in bituminous surface layer, to the compressive stress and tensile stress dispersion in the two block of stress region is formed between the buffer zone, where the stress gradually changes instead of mutation, reduces the stress mutation on asphalt surface damage. At the same time, the low elongation of fiberglass geogrid reduces the deflection of pavement, which ensures that the pavement will not be deformed.
- Q: What are the types of geogrid, respectively, what role?
- Glass fiber geogrid features:The product has the characteristics of high strength, low elongation, high temperature resistance, high modulus, light weight, good toughness, corrosion resistance, long service life, can be widely used in the old cement pavement and airport runway maintenance, dams, river, slope protection, bridge pavement engineering field enhancement processing, can give the pavement reinforcement and reinforcement to prevent rutting, fatigue crack of pavement, hot and cold crack and the expansion of reflection crack, and can disperse the bearing capacity of pavement and prolong the service life of the pavement, high tensile strength and low elongation, no long-term creep, high physical and chemical stability, thermal stability, fatigue cracking, rutting resistance, cracking resistance at low temperature delay, reduce the reflection crack.
- Q: Are geogrids resistant to biological fouling?
- Yes, geogrids are typically resistant to biological fouling.
- Q: How many grams per square meter of 15KN Geotextiles
- The geotextile 15KN you asked for should be the tensile strength of Geotextiles
- Q: What is the geogrid GSJ80/HP
- 4, mixed with asphalt compatible materials - glass fiber geogrid treatment process after coating is designed for asphalt mixture, every fiber is fully coated with high compatibility with asphalt, so as to ensure that the glass fiber geogrid in the asphalt layer and not in isolation of asphalt mixture but, firmly together.5, physical and chemical stability, through special postprocessing agent coating, glass fiber geogrid can resist all kinds of physical and chemical erosion wear, can resist biological erosion and climate change, ensure that its performance is not affected.6, lock and limit the aggregate because of glass fiber geogrid is mesh structure, aggregate in asphalt concrete can be run through them, thus forming a mechanical interlock. This restriction hinders the movement of aggregates, so that the asphalt mixture in the case of load can achieve better compaction state, higher load capacity, better load transfer performance and smaller deformation.
- Q: Can geogrids be used in reinforced earth structures?
- Yes, geogrids can be used in reinforced earth structures. Geogrids are commonly used as a reinforcement material to enhance the stability and strength of soil structures, including reinforced earth structures. They provide tensile strength, reduce soil movement, and improve the overall performance and durability of the structure.
- Q: Can geogrids be used in coastal erosion control?
- Yes, geogrids can be used in coastal erosion control. Geogrids are often employed as a reinforcement material to stabilize soil and prevent erosion in coastal areas. They can be used to strengthen slopes, retain beach or dune materials, and provide stability to coastal structures like seawalls or revetments. Geogrids are designed to withstand the harsh coastal environment and can effectively reduce the impact of wave and tidal action on the shoreline, making them a valuable tool in coastal erosion control efforts.
Send your message to us
Anti-Corrosive Fiberglass Geogrid Earthwork Geocells for Sale
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50000 m²
- Supply Capability:
- 200000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
