Aluminum Foil Plastic Bag Lidding Foil Lidding Foils Using Aluminum
- Ref Price:
-
$2,600.00
/ m.t.
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 3 m.t.
- Supply Capability:
- 100 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Description
Aluminium foil is produced by rolling sheet ingots cast from molten billet aluminium, then re-rolling on sheet and foil rolling mills to the desired thickness, or by continuously casting and cold rolling. To maintain a constant thickness in aluminium foil production, beta radiation is passed through the foil to a sensor on the other side. If the intensity becomes too high, then the rollers adjust, increasing the thickness. If the intensities become too low and the foil has become too thick, the rollers apply more pressure, causing the foil to be made thinner.
The continuous casting method is much less energy intensive and has become the preferred process.For thicknesses below 0.025 mm (1 mil), two layers are usually put together for the final pass and afterwards separated which produces foil with one bright side and one matte side. The two sides in contact with each other are matte and the exterior sides become bright, this is done to reduce tearing, increase production rates, control thickness, and get around the need for a smaller diameter roller.
2.Specification
Application: Lid of yogurt package, dairy package
Alloy: 8006/8011/8079
Temper:O
Thickness& Tolerance: 0.03mm-0.05mm(±5%)
Width& Tolerance: 200mm-1650mm(±1mm)
Mechanical Properties: Tensile Strength (U.T.S)≥50Mpa, Elongation≥1%
Standard: GB/T3198 /ASTM-B209/EN546
3.Our advantage
We can supply best quality and price！
4.Pictures
5.FAQ:
1)what is aluminum?
Aluminium (or aluminum; see spelling differences) is a chemical element in the boron group with symbol Al and atomic number 13. It is a silvery white, soft, nonmagnetic, ductile metal. Aluminium is the third most abundant element (after oxygen and silicon), and the most abundant metal in the Earth's crust. It makes up about 8% by weight of the Earth's solid surface.
Aluminium metal is so chemically reactive that native specimens are rare and limited to extreme reducing environments. Instead, it is found combined in over 270 different minerals.The chief ore of aluminium is bauxite.
2)What's kind of payment term we can supply?
CIF,CFR, FOB and other.
3)Can we supply samples?
Yes, we can!
4)What can you do if you have other quastions?
You can contact us freely at any time!
- Q: i eat tin foil paperplease tell me is it going to harm me?
- Well I live in Wisconsin and I never blanket my horses unless the temp goes below zeroMy horses are pretty well accustomed to the weatherUp here 50 degrees is warm.but i know that 50 there must feel cold because of what the horses are used to normallyIf you feel that this is cold enough or if this is a low temp for Calthen I would maybe use a very light blanketI don't think your horse would need much more than that if you are concernedPersonally I don't like to blanketHorses grow accustomed to their environment very wellI actually think your horse should be fine without but like I said if you are truly concerned because of health issues then you may want to.
- Q: I baked some buttery bread rolls and bcz it's late and I wanted to get over with it,I put them in the freezer when they weren't cold.I realised smth didn't feel right so after 10 mins I took them out (they're wrapped in aluminium foil) and put them in a cold,dry place instead.I plan on putting them in the freezer tomorrow morning.Will that be ok?
- Next time, allow the rolls to cool, unwrappedWrapping them in foil or plastic wrap creates steam making them soggy, as you have discoveredIf you haven't dumped those soggy rolls, try heating them in a 350F oven and they may dry out and be edible.
- Q: is leakingmt brother says it is loose but cant be replaced without replacing the whole thing is this true?
- tricky subjecttry searching over the search enginesthat will might help!
- Q: what does that mean i left a lip on all the edges of the pan as you can tell im jus learning to cook! thanks for the help.
- From everything I have seen over the years, manufactured homes appear to be better built than ones built on siteThe fact is that they are built in a controlled environment by a crew of people working under ideal conditionsThere is no exposure to elements while under construction, and the quality control is definitely betterI wouldn't worry about purchasing such a homeThe fact that the inspector found only minor problems should be encouraging as well.
- Q: So my dad has this canoe thats about like 17ft long and its pretty old and I want to paint itHe won't let me paint it though because he thinks the paint will scratch off and he doesn't want me to ruin iti read how to do it onlineSand with 80 grit paper to get the oxidizer offApply self etching aluminium primerPaintDo you think doing this will ruin it?? If so do you have a better way to paint it?
- I like it but I don't wear it that muchAbercrombie has some cashmere sweaters sometime that are so soft I could sleep with them if I was crazy lol!
- Q: If the price of aluminum (a substitute for steal) rises, what happens to the steel producer's supply curve? The supply curvea) shifts to the leftb) shifts to the rightc) remains unchangedI am an undergrad in economics and this question should be extremely easy for meBut I am convinced its C, because a higher price for the substitute would create more consumer demand for the product that is cheaper or is less expensiveSo, the demand curve for steal would shift right and the new equilibrium would be at a higher quantity sold and at a higher price without a change in supplyBut the book says the answer is BBut I totally disagreeWhat am I missing?Help me out.
- Place directional covers on the registers if you are unable to turn the vent off mechanically.
- Q: the ignition actuator inside the steering column was busted while someone was trying to steal the truck, its a 91 ford F150With the Steering column cover off I can start it if i push the actuator rod down manualy with a pair of pliers or at least the check engine lights/dash lights go on however once I do that I still have to go under the hood and jump the relay with a screw driverAny thoughts on why it wont crank over simply by pushing the rod all the way down into the ignition switch ? Could this be a broken ignition switch on the steering column ?
- If you push the rod forward, it should go untill the the ign powers upThen, it should go in one step further, and you should feel spring tension from the ignition switchThat is the start positionIf it gets that far, and nothing happens, look at the ignition switch closely, as those tend to come apart internallyThere was a recall on them for starting fires, so I would replace it anywayThe steering lock actuator is pretty easy to change, that is the horeshoe shaped aluminum peice that is broken in your steering column3E715 is the basic part number, I believe, but been a while since done one.
- Q: I am in the middle of making a custard pieI bought one of those roll out pie crustsI ran out of aluminum foil to put on the edges of the pie to prevent burningI am not able to go out to buy moreCould I possibly put parchment paper on the ends in place of the aluminum foil?
- For Sure!! it is more expensive than foil but will work just as wellCut a ring the size of the pie crust edges and lay it over the top of the pie.
- Q: I'm trying to make cookie cutters, and I've made a form by tracing the pattern onto a piece of wood and driving nails into the wood around the outlineI now want to bend strips of aluminum flashing around the formIs there a way I can do this with heat? If I clamp the flashing to the nails, heat it, and then cool it, will the aluminum keep the shape of the form?
- you should be able to this rather easily, i would start by just bending the metal by handif it is too thick for you to bend by hand do you have access to a visethe length of the metal will change a little in the bend so don't measure the length first, just one bend at a timeheating and cooling won't have much effectjust one bend after another should sufficei have a metal punch that i would use to make a hole or two at the end and then pop rivet them together,(the ends)
- Q: why is aluminum often used as cooking utensils?
- Other then all the other great things aluminium foil is a reat baking liner, when you make caseroles and lasagna dishes, line line the pan foil to have an easier clean-up, also works great for bronies, and cheesecake bars etcBut if you want to line a pan with something for cakes then use parchment or waxed paper.
Send your message to us
Aluminum Foil Plastic Bag Lidding Foil Lidding Foils Using Aluminum
- Ref Price:
-
$2,600.00
/ m.t.
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 3 m.t.
- Supply Capability:
- 100 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
