Wire Braided hydraulic hose 100R17
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Hose range suitable to carry hydraulicfluids such as glycol, mineral oils, fuels, lubrication, emulsion andhydrocarbons etc. It is used for low-medium pressure hydraulic systems inindustry and agriculture. ...
Parameter
SIZE | I.D | REINFORCEMENT DIAMETER | O.D | W.P | B.P | BEND RADIUS | WEIGHT | ||
INCH | DASH | MM | MM | MM | BAR | PSI | BAR | MM | KG/M |
1/4 | -4 | 6.2-7.0 | 10.4-11.1 | 12.5-13.3 | 210 | 3000 | 840 | 50 | 0.19 |
5/16 | -5 | 7.7-8.5 | 11.5-12.1 | 13.8-14.6 | 210 | 3000 | 840 | 55 | 0.22 |
3/8 | -6 | 9.3-10.1 | 14.0-14.6 | 16.2-17.0 | 210 | 3000 | 840 | 65 | 0.27 |
1/2 | -8 | 12.3-13.5 | 17.2-17.8 | 19.5-20.3 | 210 | 3000 | 840 | 90 | 0.46 |
5/8 | -10 | 15.5-16.7 | 22.0-22.6 | 24.3-25.1 | 210 | 3000 | 840 | 105 | 0.57 |
3/4 | -12 | 18.6-19.8 | 25.1-25.9 | 27.6-28.4 | 210 | 3000 | 840 | 125 | 0.78 |
1 | -16 | 25.0-26.4 | 32.6-33.4 | 35.2-36.0 | 210 | 3000 | 840 | 150 | 1.4 |
- Q: Can the copper tube of GREE air conditioner be changed into rubber tube?
- Unless they are specially made for air, rubber tubes for general industrial and domestic use shall not be used for connecting air conditioners. Because the refrigerant to plastic and other polymer compounds will play "swelling" role, make it soft, expansion and foaming, will make plastic and other polymer materials more easily aging and decomposition. In addition, the refrigerant pipe is not suitable for the environment of high temperature, low temperature and high pressure, and plastic pipes can not be used.
- Q: What is a rubber core pulling method?
- Hose core pulling for broken line and curve type pore channels, in addition to leaving the grouting hole and exhaust hole should also set the urinary bleeding hole, hole curve (line) to stay in the top hole, with the method of grouting hole.
- Q: Rubber tube in the production process need to wrap cloth, in order to finalize the design, I want to know what cloth is winding cloth, what is the specification, please god!
- Rubber pipes need to be wrapped in fabric during production so that they can be easily formed. I want to know that the winding fabric is commonly called water cloth". Specifications can generally be winding as required!
- Q: How to detect the reliability of rubber hose
- Low temperature bending test at low temperature: hose clamp on rigid torsion wheel diameter hose diameter 12 times, for 6 hours at a low temperature, twisted 180 degrees within 12s when the measured torque and the standard temperature measured torque ratio. Low temperature bending: hose clamped in the diameter of the hose within 12 times the torsion wheel, parked at low temperatures for 24 hours, in the 10s to reverse 180 degrees, check whether or not the internal and external plastic brittle fracture and damage. Test of low temperature brittleness measurement hose is the most simple specimen should be bent 90 degrees at low temperature, or a hose after freezing compressed 1/2 to see whether the embrittlement, another method is to use a certain weight of the heavy hammer falls freely, to see if the specimen embrittlement impact specimen.
- Q: Production process and raw material of rubber
- The relationship between tensile strength and rubber structure: a large force between molecules, such as polar and rigid groups; the molecular weight increases, increasing the fan Edward force, the chain segment is not easy to slip, the equivalent of molecules formed between physical crosslinking points with the molecular weight increased, the tensile strength increased to a certain extent reached equilibrium; microstructure the molecular structure, such as the effect of cis - and trans structure;
- Q: The use of anti slip rubber joints under what circumstances?
- When the pipe produces instantaneous pressure and is greater than the working pressure, it should choose a joint higher than the working pressure and one gear. For example, when the pipe starts at an instantaneous pressure of >1.0MPa, the 1.6MPa shall be used as the joint. When the instantaneous pressure is >1.6MPa, the joint of 2.5MPa shall be used.
- Q: How can the hose of natural gas be connected to the water heater?
- One end is connected to the water heater, the other end is connected to the gas pipe, and the other end of the gas pipe needs to be equipped with three through. Are you installing it yourself? Why don't you find the man who installed the water heater to put you through? Suggest that you still find professionals to connect, so that relatively safe. Hope to be of help to you.
- Q: Why are the lengths of the household combustion equipment linked to the gas pipe hose no more than 2 meters?
- Avoid prolonged accumulation of gas combustion
- Q: Laboratory condensate water pipe must use rubber tube, shall not use latex tube reasons
- Hydraulic test verification pressure test: Test hose and assembly under verification pressure, continue 30s-60s, whether to produce leakage, deformation and damage. Compression deformation test: keep 1 minutes under the specified pressure (work pressure, verification pressure or other pressure below the proof pressure), measure the length and diameter of the hose, twist angle and bend. Bursting pressure test: Determination of the pressure at which the hose burst during the specified step-up rate.
- Q: What's the difference between a silicone tube and a rubber tube?
- 1. Smell it with your nose. Silicone has no taste, rubber has taste.2, feel with your hands. Silicone generally better flexibility, rubber mechanical better.
Send your message to us
Wire Braided hydraulic hose 100R17
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords