Hydraulic Hose SAE100 R7
- Ref Price:
-
$1.49 - 1.83
/ pc
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1000M pc
- Supply Capability:
- 80000M per month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Quick Details of Hydraulic Hose SAE100 R7
outer material: | synthetic rubber | standard: | SAE 100 R7/R8 | reinforced layer: | high pressure fiber |
inner layer: | nylon | cover: | nylon or PU | W.K:: | 6.9-34.5 Mpa |
ID:: | 3/16 to 2 | ||||
Specifications of Hydraulic Hose SAE100 R7
Structure :This kind of hose is made of lnner tube(Nylon),Reinforcement (high pressure synthetic fiber),and cover (high flexibility nylon or thermoplastic).
Capability : It is lightwerght. Flexibility. And the inner tube is very smooth. With a few loss of pressure, the hose resistance of the medium flowing is small, and it also owns a fine performance of Anti-chemical and ulse.
APPLICATION: Automobile, engineering machinery, lathe, agriculture machine, mining, spurting the oil paint, Avigation & spaceflight,cooling and other hydraulic control system.
The Technical Parameters of Hydraulic Hose SAE100 R7
Hose ID | Wire OD | Working Pressure | Burst Pressure | Min. Bend Radius | |||
inch | mm | mm | MPa | Psi | MPa | Psi | mm |
1/8 | 3.3 | 8.5 | 17.2 | 2500 | 68.9 | 10000 | 13 |
3/16 | 4.8 | 10.8 | 20.7 | 3000 | 82.7 | 12000 | 20 |
1/4 | 6.4 | 13.0 | 20.7 | 3000 | 82.7 | 12000 | 33 |
5/16 | 7.9 | 15.1 | 17.2 | 2500 | 68.9 | 10000 | 46 |
3/8 | 9.5 | 17.0 | 15.5 | 2250 | 62.1 | 9000 | 51 |
1/2 | 12.7 | 20.7 | 13.8 | 2000 | 55.2 | 8000 | 76 |
3/4 | 15.9 | 27.1 | 8.6 | 1250 | 34.5 | 5000 | 127 |
1 | 25.4 | 34.0 | 6.9 | 1000 | 27.6 | 4000 | 203 |
Packaging & Delivery
Packaging Detail: | By woven bag |
Delivery Detail: | In 15~30days after receiving the 30% deposit |
- Q:How do the rubber tubes fit into the galvanized pipe?
- If the rubber tube is outside the galvanized pipe, when the rubber is ordered, the inside diameter shall be greater than the outer diameter of the galvanized pipe. If the rubber tube is inside the galvanized pipe, when the rubber is ordered, the outer diameter of the rubber pipe will be galvanized and the inner diameter of the galvanized pipe will be inside
- Q:How to prevent leakage of rubber joint check valve?
- Is an integral structure, one hundred percent high quality elastic rubber material, built-in reinforcing fibers, except hooped external stainless steel hoop, its interior does not contain any metal accessories, will not rust corrosion, and wear resistance strong, no mechanical failure worries, no maintenance. Because it is used in butyl rubber, so that the wear resistance is particularly strong with the traditional water pressure automatic opening and closing are very safe and reliable, no noise, no need of manual operation, so no need to maintain his application scope is wide.
- Q:There are several ways to connect the built-in rubber stop
- The spot heat vulcanization method is a heat vulcanizing mould matched with a water stopping strip and a raw film vulcanizing heat junction. The construction is difficult, but the joint effect is ideal, which is suitable for the project with strict quality requirements.
- Q:What is the essential difference between natural rubber and three yuan ethylene propylene rubber?
- The glass transition temperature of natural rubber is -72 Deg. C, plastic flow temperature is 130 degrees centigrade, start decomposition temperature is 200 degrees centigrade, intense decomposition temperature of 270 DEG C. When natural rubber is vulcanized, its Tg rises, and no more viscous flow occurs.
- Q:Pipe rubber shock absorber: flexible joints and flexible connections are not the same thing
- Flexible joints are part of a flexible joint, and the connection between a flexible joint and a flexible connection is not exact.
- Q:How often do the oil - resistant rubber pipes undergo atmospheric pressure testing?
- Low temperature bending test at low temperature: hose clamp on rigid torsion wheel diameter hose diameter 12 times, for 6 hours at a low temperature, twisted 180 degrees within 12s when the measured torque and the standard temperature measured torque ratio. Low temperature bending: hose clamped in the diameter of the hose within 12 times the torsion wheel, parked at low temperatures for 24 hours, in the 10s to reverse 180 degrees, check whether or not the internal and external plastic brittle fracture and damage. Test of low temperature brittleness measurement hose is the most simple specimen should be bent 90 degrees at low temperature, or a hose after freezing compressed 1/2 to see whether the embrittlement, another method is to use a certain weight of the heavy hammer falls freely, to see if the specimen embrittlement impact specimen.
- Q:What kind of rubber hose does not leak the smell of liquefied gas?
- The connection of stainless steel corrugated hose with gas appliance and gas pipeline adopts the way of thread connection, and the connection is more reliable, and effectively eliminates the falling off from the interface.
- Q:What are the pipes in the air conditioner?
- General automotive air conditioning system as part of the pipeline has 4 roots. Double steam system or bus to a little more.
- Q:High pressure hose crimping connector, pressed on what position can effectively prevent the head off?
- If the withholding at the blasting, the main reason is the hose and the joint has not reached the best fit, in the areas of improvement should be mainly in joint selection and press on.
- Q:What is the difference between the precast beam of the bridge and the method of pulling out the rubber tube after pouring the concrete? What's the difference between design and calculation?
- Corrugated pipe is included in the design of the amount of engineering, the role is: reserved strand space. Its length is calculated when the work length of the steel strand.
1. Manufacturer Overview |
|
|---|---|
| Location | Qingdao, China |
| Year Established | 2002 |
| Annual Output Value | Above US$ 1.5 Million |
| Main Markets | Mid East, Africa, Europe, America |
| Company Certifications | ISO 9001:2008； |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | Qingdao |
| Export Percentage | 80% |
| No.of Employees in Trade Department | 260 People |
| Language Spoken: | English; Chinese; Spain; Alabic |
| b)Factory Information | |
| Factory Size: | Above 15,000 square meters |
| No. of Production Lines | 4 |
| Contract Manufacturing | OEM Service Offered; Design Service Offered |
| Product Price Range | Average |
Send your message to us
Hydraulic Hose SAE100 R7
- Ref Price:
-
$1.49 - 1.83
/ pc
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1000M pc
- Supply Capability:
- 80000M per month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
