Wire Braided Hydraulic Hose SAE 100R1AT

Inquire Now

OKorder Service Pledge

Quality Product, Order Online Tracking, Timely Delivery

OKorder Financial Service

Credit Rating, Credit Services, Credit Purchasing

It is in full compliance with internal standard SAE100R1AT andinternational standard SAEJ517. Its oil resistant synthetic rubber made innertube features superior air and oil proof performances. Besides, the rubbercover is not only resistant to abrasion, oil and weather, but also showsexcellent aging resistance..

Q: How to make a rubber tube requires flow: The characteristics of the rubber tube has physiological inertia, UV resistance, ozone resistance, resistance to high temperature (-80 to 300), high transparency, strong resilience, resistant to compression permanent deformation, oil resistance, impact resistance, acid and alkali resistance, wear resistance, flame resistance, voltage, conductive properties.

Q: What is a rubber core pulling method?: The hose shall be filled with water or gas at a pressure of 0.5 0.8N / mm before pouring concrete. At this point, the hose diameter can be increased by about 3mm. When pouring concrete, the vibrating bar should not touch the hose, and should check the pressure of the water meter regularly. If there is any change, the pressure must be filled.Smoke tube longer than tube core pulling slightly later. Before the pipe is pumped, the water is lowered and the pipe section is reduced, and the pipe can be drawn away from the concrete. The order of pumping is usually first, then first, then first, then straight.

Q: The difference between hose and rubber tube: Latex tube is characterized by good elasticity, general tensile range of 6-9 times its own, back to stretch 100%. The rubber tube has the characteristics of oil resistance, acid and alkali resistance, heat resistance and pressure resistance, and attracts rubber pipes. It is mainly used in industry, mine, civil transportation and suction of liquids, gases and so on.Latex tube is generally used in hospitals, equipment factories, power plants, scientific research laboratories and other fields, but also related to bungee jumping, trampoline and other places of entertainment. Rubber tubes are mainly used in industry and agriculture. Latex tube is not resistant to oxidation and corrosion, and rubber tube has one of the characteristics, so its scope of application is more extensive.

Q: Plastic metal hose connector model specification, who knows?: Package type plastic hose is many, the most common is the DPJ thread joint, DPN joint, DKJ card connector, DGJ self fixed joints, Glenn joints, fittings

Q: My company does high-quality rubber tube, all of the core method, and why use EPDM to do the inner tube, it is difficult to take off the core, please point out! What's the reason?: The core needs to be removed, and if it is too long, the mandrel can be divided into two sections and separated from the 2 sides

Q: Which is safer for stainless steel bellows and rubber tubes for gas pipelines?: Stainless steel bellows, quick fitting joint, good strength. Hose connections are end face seals, greatly improving the reliability of the seal, and some gasket material using PTFE, and its life can be consistent with the tube body, can reduce the number of maintenance or replacement.

Q: How to determine the tensile strength of GB rubber joint?: In the middle of the specimen, 4 parallel lines marked by the mark mark are used to mark two distances equal to the standard distance (type 1 is 25mm, type 2 is 20mm, and type 3 is lOmm), and each reticle shall be equidistant from the center of the sample. If the non-contact deformation measuring device is used, the proper marking device shall be used, and two parallel markings shall be placed on the narrow parallel part of the sample. Each mark shall be equidistant from the specimen center and perpendicular to the long axis of the specimen, and the specimen shall not deform during the marking.Style cutting, punching machine blanking note the above points, is to test the tensile strength of rubber joints based on, but also guarantee.

Q: What are the properties of stainless steel metal hose materials?: The stainless steel metal hose is made up of corrugated pipe, stainless steel braid net and two ends joint.

Q: Hydraulic quick change joint (external thread) how to connect and seal with hose? Do you need a transition joint?: General hydraulic quick change joint is to withstand high pressure, so most of the situation is to use high pressure tubing, both ends of the pipe is to do the internal teeth, so it should be able to directly connect it.

Q: What's the difference between a vulcanized rubber tube and an intake manifold?: Air intake pipe is the air from the air inlet, through the air filter, until the individual cylinder into the front of this section of the pipeline, is the main intake line of the engine, but also the total intake line.

Send your message to us

*Email

*TEL

*Quantity

*Unit