Stretch Wrap Film Clear Wrap Film Transparent Stretch Film for Good Packaging
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 roll
- Supply Capability:
- 1000000 roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction of Stretch Wrap Film
Stretch Wrap Film is made of 100% pure sofe LLDPE raw material.
Application of Stretch Wrap Film
Stretch Wrap Film is available in hand-applied and machine formats for product moisture proof, anti-dust, fastening and protecting etc. Our stretch film are widely used in following fields, such as outer packing of corrugated box or pallet, packing of loose and small products together, packing of bare machine etc.
Advantage of Stretch Wrap Film
Economical and Practical
Excellent extension, fight to impale
Excellent ability of binding
Price: According the size and the order quantity
Packing of Stretch Wrap Film
One 20GP container can be loaded about 10-15tons.
By sea or by air all available.
Size of Stretch Wrap Film
Thickness:20-200um
Width:30-300cm
Length:1500-3000m
Notice: Special products made as per customer requirements.
Pictures of Stretch Wrap Film
Specification of Stretch Wrap Film
| Thickness Range | Tensile Strength | Elongation at Break | Angle Tear Strength | Impact Ability of Pendulum | Tackness | Light Transmission Rate | Frog Density |
| Micron | Mpa | % | N/mm | J/mm | N/cm | % | % |
| 15-17 | 37 | 250500 | 120 | 0.14 | 3 | 93 | 2.4 |
| 18-20 | 38 | 300600 | 120 | 0.15 | 3 | 92 | 2.5 |
| 21-25 | 39 | 300600 | 120 | 0.17 | 3 | 91 | 2.6 |
| 26-30 | 40 | 400650 | 120 | 0.19 | 3 | 90 | 2.7 |
| 31-35 | 41 | 450700 | 120 | 0.21 | 3 | 90 | 2.8 |
Remarks
1. The data above are typical results and subject to change without notice.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm;
Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.
3. The products should be stored at room temperature and kept from wet and heat source.
4. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.
5. The user should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for user’s special purpose and technique.
We have organized several common questions for our clients，may help you sincerely：
FAQ
①How about your company？
A world class manufacturer & supplier of castings forging in carbon steel and alloy steel，is one of the large-scale professional investment casting production bases in China,consisting of both casting foundry forging and machining factory. Annually more than 8000 tons Precision casting and forging parts are exported to markets in Europe,America and Japan. OEM casting and forging service available according to customer’s requirements.
②How to guarantee the quality of the products？
We have established the international advanced quality management system，every link from raw material to final product we have strict quality test；We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.
③How long can we receive the product after purchase?
In the purchase of product within three working days, We will arrange the factory delivery as soon as possible. The pecific time of receiving is related to the state and position of customers.Commonly 7 to 10 working days can be served.
- Q: Is plastic film made of turning? Is the machine expensive?
- The unit adopts special structure of screw extruder, screw die advanced, adjust the cooling wind ring flexible, reasonable aperture type foam structure, so that the mixed plastic three polyethylene and different proportions of uniformity, good product quality, convenient operation, stable and reliable production.
- Q: What is Matt BOPP film, or matt plastic film?
- Matt is generally matt surface roller pressing out, Matt film is like the role of frosted glass
- Q: Should the film on both sides and back of SIEMENS refrigerator be torn off?
- In the past, the condenser of the refrigerator was installed in the back of the refrigerator. It can be seen that the condenser directly sends out the heat. Now the process is improved for beauty and cleanliness. The refrigerator manufacturer installs the condenser inside the iron sheet.
- Q: What are the factors affecting the puncture strength of plastic film?
- A test piece with a diameter of 100mm is installed on the sample film fixing clamp ring. The steel needle with a diameter of 1.0mm and a top radius of 0.5mm is used. The top of the needle is driven at the speed of 50mm/min, and the maximum load of the steel needle penetrating the test piece is read. I hope I can help you.
- Q: What are the LLDPE plastic films and what are the main uses?
- Linear low density polyethylene is structurally different from ordinary low-density polyethylene because of the absence of long branched chains. The linearity of LLDPE depends on the different manufacturing processes of LLDPE and LDPE. LLDPE is usually produced at lower temperatures and pressures by copolymerization of ethylene and advanced a olefins such as butene, cyclohexene, or octyl.
- Q: What is the melting point of PET plastic film?
- PET has a high molecular structure and a certain crystalline orientation, so it has high film forming ability and plasticity. PET plastic has good optical properties and weather resistance, and amorphous PET plastic has good optical transparency. In addition, PET plastic has excellent wear resistance, friction and dimensional stability and electrical insulation. PET bottles are widely used because of their high strength, good transparency, non-toxic, impermeable, light quality and high production efficiency. PBT and PET molecular chain structure similar, most of the same nature, but the main chain from two methylene into four, so the molecules are more supple, processing performance is better.
- Q: How to choose PE plastic packing film
- Welding strength is also a necessary condition for plastic film bags to protect goods reliably. If the weld strength is not enough, the weld will become the fatal weakness of the plastic film bag, and the plastic bag will lose the protection to the goods because of the rupture of the weld seam.
- Q: What are the factors that affect the barrier property of plastic film?
- The temperature has an influence on the molecular structure of the plastic film. The increase of temperature will reduce the crystallinity and orientation of the resin, widen the molecular spacing and decrease the density, which will reduce the barrier property of the plastic film.General plastic film transmittance of all other exponentially with the change of temperature change, in contrast, gas barrier PVDC was little affected by temperature, non plastic foil material affected by temperature is smaller, the general choice of these two kinds of films do more suitable high-temperature cooking bags. In contrast, the barrier properties of ultra high barrier silicon dioxide coated plastic films are less affected by temperature.In practical application, EVOH, PVDC copolymer, PAN copolymer, PA, PEN, PET and other materials are often used as barrier materials, including EVOH, PVDC, PAN copolymer and aromatic nylon MXD6 high barrier materials, and PA, PET as the medium barrier material. EVOH, PVDC, PEN, PAN, although the barrier is very good, but or processing is not good, or high prices, or performance is not comprehensive, generally not used alone, often used in blending, composite and coating modified.
- Q: How can concrete pavement be cured after being pressed? In general, concrete curing is made of thin films and concrete pavements
- After pouring concrete should be as early as possible insulation, moisture conservation, concrete after the light should be immediately maintained, in the surface of concrete cover plasticMaterial film,Strengthen the heat preservation and moisture conservation after the concrete is poured,Where conditions permit, you can increase moisture on cloth, water, strengthen moisture, heat preservationSupport. Heat preservation and moisture conservation is a good way to prevent drying and cracking of concrete pavement. The curing time should not be less than 7 days.
- Q: Does the plastic film on the bank card fall off and affect the use?
- The damage of the plastic film on the front of the bank card does not affect the use of the card. The key is the magnetic stripe on the back of the bank card. If the magnetic stripe is valid, your bank card can be used normally. It doesn't matter.
Send your message to us
Stretch Wrap Film Clear Wrap Film Transparent Stretch Film for Good Packaging
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 roll
- Supply Capability:
- 1000000 roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
