SBS Modified Bitumen Waterproofing Membrane Production Line 

It is widely used in industrial and civil buildings, such as roof, basement, toilet, bridge, park, swimming pool, tunnel for waterproof and moistureprof. Bitumen is a hydrocarbon and is created naturally from crude oil. It is a useful carbon store and does not generate greenhouse gases. The membrane is therefore a sustainable way of storing carbon on the Earth's surface.

Advantage of Waterproofing Membrane Production Line:

1. Rational structure

2. Low transportation, installation, adjustment cost

3. convenient to operation and repair 

Descriptions of Waterproofing Membrane Production Line:

1.1 Open bookviews devices

This is two positions device which use cylinder to support the reinforcement

1.2 Intermediate feed device 

1.3 Reinforcement connecting device

By means of double sides pressing board,the device press the material on one side,daubs chemical glue on the material'sotherside,which makes the materials mixed together automatically and reduces the defective goods rate because of reinforcement joints to the greatest extent

1.4 Reinforcement drying device

No need to stop the operation while reinforcement jointing it,releases and dry reinforcement automatically

1.5 Auto rectifying device

1.6 Impregnation tension control device

Extrusion by cylinder, asphalt coating roll impregnation can be adjusted up-down.It adopts unique reinforcement tension control

1.7 Asphalt coating device

Coating asphalt twice can adjust the position of reinforcement in the coiled material,meanwhile it ensure its workability.The independent asphalt coating roller can regulate up and down by electronic.With the control of accurate electronic device,it can master the exact thickness of coiled material.During each class production,the rest materials can be reused.The flue gas environmental protection system of preimpregnated asphalt coating adopt closed overall frame form which use the method of ejecting smoke in petticoat pipe and absorbing smoke outside

1.8 Sand-scattering device

This set of device adopts the technology of automatic tracking and rectifying sanding,which reduces the waste of sand to the greatest extent

1.9 Sand lifting device

1.10 Filming and thickness-measuring device

Through thisdevice,we can regulate the positions of the coiled material and the membrane optionally,which reduce the defective goods,and the powe-driven lifting technology can save manpower

1.11 Sand-pressing with suspending cooling device

This device extended 10-15 meters which speed up the cooling to a certain extent.Advanced thickness measurement device detects the products quality to ensure the thickness of the stability 

1.12 Cooling embossing device

1.13 Finished products storage device

1.14 Traction-Spring devices

Minimize membrane tension on the winder,assist to storage product and auto winder using effects.

1.15 Auto winder device

Inverter computer programming and touch screen synchronization control method realized conveying felt,ounting,cutting felt,gluing tape,propelling felt and rolling automation.

1.16 Electrical operationg control devices

1.17 Mixing-weighing system devices 

Cutting type mixing blades ensure the raw material solubility and avoid coking of tank wall.Emptying from the tank's taper bottom makes the raw materials discharged completely.Electronic digital display weighing guarantee the accuracy of the mixture ratio.The rational distribution of linepipe,gel and granding oil pump for the operating deck.make practicability more reasonable.Flue gas treatment technology:filtrate strive first and oil fume then to ensure the flue unimpeded via dismountable and washable filter

1.18 Horizontal storage tanks

1.19 Powder-converying system

The process flows are as following:First,with PLC control,storage tank delivery material to charger through pneumatic valve.Next supply the material to gauging tank from spiral conveyer.Third,it shows the needed material quantity by electronic balance,and carries the material to spiral conveyer pass sealed feeders.At last,feed the material to each agitator tank by PCL controlling.If you need to choose several working process,then directly select the agitator tank which you need on PCL control panel

1.20 Smoke purification device

Using spray of welcome method,dust gauze,active carbon adsorptive process and demister to dispose the smoke.Then attainning the environmental standardization,Lowcost,effective.Saving more factory space

FAQ:

1. Can we visit factory?

A: Yes, always welcome.

2. Will the engineer go abroad to give install instruction?

A: Yes, our engineer will go to customer's factory to do install support.

3. How long is the production period?

A: It generally takes 45 days for the equipment production.