S818C Road Roller Buy S822C Road Roller at Okorder
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 300 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Name: S818C Road Roller
Parameter:
Model | Unit | S818C |
Operating weight | kg | 18000 |
Weight on front drum | kg | 9000 |
Static linear pressure | N/cm | 422 |
Speed range | km/h | |
Speed I | 2.54 | |
Speed II | 4.97 | |
Speed III | 10.51 | |
Theoretical gradeability | % | 30 |
Min. external turning radius | mm | 6500 |
Steering angle | ° | ±33 |
Oscillating angle | ° | ±11 |
Vibration frequency | Hz | 28 |
Nominal amplitude (high/low) | mm | 1,9/0,95 |
Excitation force (high/low amplitude) | kN | 320/160 |
Engine model | SC8D156.2G2B1 | |
Type | Water cooled, pressurized | Water cooled, pressurized |
Max. power | kW | 115@1800r/min |
Engine oil consumption | g/kW.h | 223 |
Hydraulic oil tank capacity | L | 170 |
Fuel tank capacity | L | 240 |
Advantages:
state-owned company
fortune 500 company
AAcustom
Why choose us?
1 sincre
CNBM International is a state company, now is one of the largest state-owned group cooperation in China! All the equipment such as tower cranes, produced by CNBM are compliant with the national level quality.
2 professional
Our engineers will at your services 24hours to solve all your tower crane installation and other questions. Our goal is to provide the best professional services.
3 quality
CNBM International’s tower crane have strict quality control, only the best quality products can pass the test.
4speed
We have professional sales team to guarantee your reply within 12hours to save your precious time.
5 After sales
If the tower crane has any problems, we will solve your problems in first time.
Inquies FAQ
My dearest friend, if you want to buy our tower cranes, please tell us the following parameters. And we will make the most suitable project for!
1. Building height or tower crane working height.
2. Max load capacity and tip load capacity.
3. Span or jib length
4. Other Special requirements
- Q:Brief introduction of tyre roller
- A tire roller is a machine operated by a plurality of pneumatic tyres for the road. The roller of tyre roller adopts pneumatic tyres, usually 3~5 front wheels and 4~6 rear wheels. If the change of inflation pressure can change the ground pressure, the range of pressure regulation is 0.11 ~ 1.05 mpa.The tire roller adopts hydraulic, hydraulic or mechanical transmission system, single shaft or full axle drive, wide base tire, articulated frame structure, three point support. Compaction process has the role of rubbing, so that the compaction layer particles are not damaged and embedded, homogeneous and dense. Good maneuverability, fast speed (up to 25 km / h).
- Q:In the practical process, which one is the most practical? May I ask who can help me explain?
- the airport runway and the F1 track level is not the same, the higher the level, the higher requirements on and micro the overall structure of the pavement radian, the rubber wheel can be very good to meet these requirements, of course, only in the high requirements of the road we can see this kind of roller, usually in the side is not to see
- Q:Is the roller on the road?
- 3: according to the regulations on the administration of urban roads (Decree No. 198th of the State Council), twenty-eighth articlesLicense conditions: tracked vehicle, iron wheel carts or overweight, high and long vehicles driving on the roads in the city, shall be the competent administrative department for approval of municipal engineering agree, and in accordance with the traffic police department designated the time and route.
- Q:XCMG vibratory roller XP and XS? What do you mean?
- Since then, in addition to February, because of the Spring Festival factors are relatively low sales, from March, Roller Road sales all the way up, April is a substantial increase of 30.7%, reaching the peak in 2013 sales. Since then, each month has maintained a year-on-year growth trend, and some months of year-on-year growth of even more than 40%. From the sales situation, the eastern region (Beijing, 2013 Tianjin, Hebei, Liaoning, Shanghai, Jiangsu, Zhejiang, Fujian, Shandong, Guangdong, Hainan) roller sales of 4834 units, an increase of 24.33%; the central region (Shanxi, Jilin, Heilongjiang, Anhui, Jiangxi, Henan, Hubei, Hunan) pressure the road machine sales of 3436 units, an increase of 27.68%; the western region (Sichuan, Chongqing, Yunnan, Guizhou, Tibet, Xinjiang, Gansu, Qinghai, Ningxia, Shaanxi, Inner Mongolia, Guangxi) roller sales of 4061 units, an increase of 20.33%.
- Q:What kind of hand roller is good for use? Now it seems to be hydraulic and Mechanical
- It must be full hydraulic and easy to use. It is not only convenient, but also high efficiency and low failure rate!
- Q:What are the classification methods of vibratory rollers?
- Double steel roller drive is divided into two driving double vibration, double drive single vibration (walking drive, vibration compaction)There may be other, too. This is a more conventional classification.
- Q:Roller cylinder is cylindrical, the width of the drum is 1.5 meters, the cross sectional diameter is 1.2 meters, if every minute to 10 laps, then 1 when the pressure of the road surface number of square meters?
- Solution: the bottom perimeter is 3.14 * 1.2=3.768 (meters)The lateral area of the cylinder is 3.768 * 1.5=5.652 (square meters)10 turns per minute, you can find one minute, the area of the road is 5.652 * 10=56.52 (square meters)1 hours =60 minutes56.52 x 60=3391.2 (square meter)Answer: 1 hours, 3391.2 square meters of road surface pressure
- Q:Where is the driving wheel of the steel roller?
- Different manufacturers design is different, some single drive, some double drive, as if the single drive is generally the latter drive
- Q:What is static roller mill and what's the difference between vibratory roller and vibratory roller?
- It's the wrong place. The roller compactor is just compacting the road through the weight of the roller.
- Q:Do we have to use rubber wheels? Is there a mandatory rule?The fine-grained AC-13 is ready to let the builders use the rubber wheel, but the builders say the rubber wheel is rarely used. Would I like to know if this is necessary?
- 4, only SMA prohibits the use of rubber wheel rolling, because the rubber wheel will destroy the structure of SMA5, the construction side said that rubber tire is rarely used as an excuse, under normal circumstances, in addition to the use of rubber wheel SMA6, for fine-grained AC-13, if not steel wheels, the problem is not large, if not rubber, certainly not
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
S818C Road Roller Buy S822C Road Roller at Okorder
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 300 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords