Refractory Raw Materials - Molten Iron Insulation Agent
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Molten iron insulation agent Product description The molten iron insulation agent is my company to cater to the needs of the market development of metallurgical products. The product effectively substitute the traditional use carbonization rice and other carbonaceous materials, solve the high, transportation agent water covered the defects in use and to appear in the heat loss, and easy to crusting, stick the furnace wall, hang slag etc, it is home to more than in normal use steel mill, and get good use effect and high reputation from the customers. Product features 1. Spread good performance and can even coverage of the iron liquid surface; 2. Strong heat insulation, heat preservation time long, iron temperature drop small; 3. Product ingredients stability, rare slag performance is good, use not crusting, not erosion bag wall, and turn packets clean, reduce the workload of qing bag; 4. Product alkalinity ?
Into a | SiO2 CaO fixed C bulk melting point |
Refers to the standard | 10~18 10~18 30~45 <1150℃ <0.8 |
Usage and dosage
Molten iron by the bag, directly add to the molten iron liquid surface department, addition amount depends on the molten iron residence time 1 ~ 1.5 kg per ton steel according to choose.
- Q:Would you like to know if there are any enterprises in Mianyang that need fire-resistant materials?
- Smelting and casting needs, need more long double
- Q:Which industry does the metallurgy and thermal insulating and refractory material belong to?
- It belongs to the refractory industry, which has its own trade association.
- Q:What kind of material is refractory bauxite?
- Bauxite in refractory industry usually refers to the calcined bauxite ore which contains Al2O3 no less than 48%, while the content of Fe2O3 is rather low. Clinker of bauxite with high alumina is calcined bauxite. Tghe clinker is grey, light yellow and dark gray.
- Q:Why should graphitic refractory materials be used now that graphite can burn?
- Materials for refractory must have the following characteristics and properties: 1, high stability: Anti-oxidation, anti-reduction, thermal decomposition; 2, high melting point : 2800℃; 3, low price. Graphite has all three characteristics and properties, especially melting point and stability.
- Q:what materials can make external wall fireproofing paint have the fireproofing effect
- Adding flame retardant or fire retardant materials can be fireproofing, which commonly referred to as the external walls of fire retardant coating or fire retardant coating. Principle: Fireproof paint itself is flame-retardant or non-combustible, so that the protected base material can not directly contact with the air in order to the ignition delay and reducing the burning speed; except that, it also has a lower thermal conductivity, which can delay the transfer of flame temperature to the protected base material; fireproof paint thermal can decompose non-combustible inert gas by heating to dilute the thermal decomposition of combustible gas in protected object, making it difficult to burn or slow down the speed of burning.
- Q:Who knows that among refractory materials, insulation boards from which refractory material industry is superior in quality?
- When casting ingot, after high temperature molten steel is poured into ingot mold, molten steel keeps shrinking during cooling, for example, killed steel is shrinking 3% --5%. because of fast heat dissipation of ingot head , some shrinkage holes appear at the head of ingot. Therefore, you should cut shrinkage holes which account for more than 15% of the ingot quality in the head while cutting steel ingot cogging. If effective measures were taken to insulate the head of ingot from heat, then the coagulation time of ingot head would lag behind in the body of the ingot solidification, which will greatly shrinkage holes, improve ingot yield so as to reduce energy consumption of steelmaking. Adiabatic plate can achieve this purpose. China Heng insulation board has the advantages of uplifting adiabaticity and small heat capacity, so that it greatly reduced heat loss of molten steel, And the tundish can be directly put into use without preheating, thereby saving a large amount of preheating fuel. So in the current process of continuous casting, the heat insulation board is the main material of tundish lining.
- Q:I know which material is the fire resistance rolling shutter door
- the materials of fire resistance rolling shutter door are: the inner of fire resistance rolling shutter door is generally filled with aluminum silicate fiber cotton. fire resistance rolling shutter door is divided into AAA inorganic fireproof rolling shutter door and steel fire resistance rolling shutter door. the fireproof?performance of inorganic fireproof rolling shutter door is better, but steel fire resistance rolling shutter door has a certain wind load resistance, which can be installed outdoors.
- Q:What is the main material of fireproof wooden door?
- Fireproof wooden door has a lot of materials! including imported timber decorative effects: utilizing the diversity and easiness to cut of the timber, with all the decorative characteristics of the timber. Material selection features, door frames: Using high-quality hardwood, such as imported miscellaneous wood, camphorwood, lauan, hemlock, etc., insetting fire and smoke proof adhesive tape
- Q:What requirements should refractory materials meet?
- Ladle is an necessary equipment to undertake molten steel and continuous casting. As many kinds of steel needs to be processed in the ladle, including argon blowing tempering, alloy composition fine-tuning, refining dusting and vacuum processing, working conditions of the ladle lining have worsened. Their working conditions are as follows. (1) The temperature of molten steel is higher than mold casting ladle. (2) the molten steel stays longerin the ladle. (3) ladle lining are subjected to volatilization and agitation of molten steel under high temperatures and in vacuum. (4) The impact on the lining when undertaking steel liner when the impact effect. Therefore requirements of the ladle refractories are as follows: (1) It can resist high temperature. Molten steel should be able to withstand high temperatures without melting. (2) It can resist thermal shock and can withstand molten steel without cracking and spalling. (3) It can resist slag erosion. The ladle should be able to withstand the erosion of lining caused by slag and alkalinity changes of slag. (4) it should have sufficiently high temperature mechanical strength to withstand the agitation and scouring of molten steel. (5) lined should have certain swelling property so that lining will be united as a whole under the effect of hyperthermal molten steel.
- Q:Urgent question: could you tell me that the export of refractory materials to Vietnam is to be packed in wooden cases and smoked?
- Of course, there are also some docks that need not be fumigated! But also according to the requirements of the port of destination guests, because customs clearance may be proof of fumigation!
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Refractory Raw Materials - Molten Iron Insulation Agent
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords