Polyethylene Environmental Engineering Geomembrane for Radioactive or Hazardous Waste Liquid
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m²
- Supply Capability:
- 1000000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Application
1. high quality hdpe geomembrane use in agriculture
1. high quality hdpe geomembrane use in agriculture farm
3. high quality hdpe geomembrane use in shrimp ponds orLotus
4. high quality hdpe geomembrane use in Slope protection impervious
5. high quality hdpe geomembrane use in Landfill anti-seepage
6. high quality hdpe geomembrane use in Agricultural water reservoir:
7. high quality hdpe geomembrane for roof seepage control
Technical specifications of HDPE geomembrane:
a) Density ≥ 0.94g/m2
b) Tensile Strength ≥25Mpa
c) Elongation at Break ≥ 550%
d) Right-angled Tear ≥ 110N/mm
Feature:
1. Corrosion resistance, aging resistance, puncture resistance
2. Repairable and recyclable
3. Very low permeability and good flexibility
4. Smooth, UV resistance and no toxic
5. Excellent environmental stress cracking resistance property
6. High tensile strength and elongation
Our Service
1.On a regular basis or as per your request,we entrust national testing agencies to conduct quality inspections
2. Strictly in accordance with the ISO9001-2008 international quality system standard,we monitor and manage the whole process throughout production,quality testing,and measurement to ensure product quality
3. For quality-related construction delay or substandard construction(except for damage or losses due to customer’s responsibility or irresistible natural disasters),we have refunding,replacement,and repair services.We will respond to customers’ feedbacks on quality issues within 24 hours.
After-sales service
1.In order to provide customers with comprehensive technical support,we will provide technical and other related information upon request in a timely manner.
2.In required,we will appoint specialized technicians to the construction site to give technical trainings to construction people,and offer technical guidance throughout the whole construction process.
3.For damage due to shipment and delivery,after we receive the complaint,we will check the issure through provided pictures and videos.If our responsibility is confirmed,we wil offer free replacement.
4.When the construction is completed,as your request,our technical staff may participate in the final acceptance.
FAQ:
Q: What kind of payments does jenor support?
A: T/T, L/C, Cash are accepted.
Q: Do you charge for the samples?
A: Accordeing to our company policy, the samples are free, we only charge the freight fee. And we will return the freight fee during the next order.
Q: Can you produce according to customers' design?
A: Sure, we are professional manufacturer, OEM and ODM are both welcome.
Q: Do you have other products?
A: Yes, please check the pictures:
- Q:Application characteristics of geomembrane
- Functions: Seepage-proof, isolation applications: Refuse landfill, sewage or offscum disposal plant seepage-proofing. embankment, lake dam, tailings dams, sewage dam and reservoir area, channels, hydraulic accumulating pond (pit, mine). Subway, basements and tunnels, tunnel anti-seepage lining. Roadbed and other foundation salt marsh seepage-proofing. Horizontal impervious blanket in the front of dyke and dam, foundation vertical impervious barrier, the construction cofferdam, waste storage. Seawater, freshwater farms. Roads, highways, railways foundation; expansive soil and waterproof layer of collapsible loess. Roofing seepage-proofing. Product: Including LDPE geomembrane, LLDPE geomembrane, HDPE geomembrane, EVA geomembrane, ECB geomembrane, PVC geomembrane, matte geomembrane. PVC geomembrane technical index serial number items I Type II Type 1 tensile strength ≥ 8. 0 12. 0 2 breaking elongation rate % 200 250 3 heat treatment dimensional change rate % 3. 0 2. 0 4 low temperature buckling ℃ -20 ℃ flawless -25 ℃ flawless 5 puncture resistance 6 imperviousness impermeable
- Q:Water conservancy geotechnical membrane pe50 - 200 - 3 is what mean
- Thickness and weight
- Q:Are geomembranes resistant to microbial degradation?
- Yes, geomembranes are resistant to microbial degradation.
- Q:Is the notebook protective film good?
- It is best to prepare an adhesive tape and fold it in the shape as the figure below (used for sticking to dust). Before pasting, first shut down the power. You'd better post some soft cushion in the bottom of the screen, because the screen of most computers may not be able to fold to 180 degrees. It is best to fix the screen well. First clean the screen, and it must be cleaned thoroughly, otherwise there is dust left and small bubbles will appear. First take out the screen film to make sure that its size is the same with that of the screen. And after confirmation, you will see there are stickers marked 1 and 2 on the protective film. First fold the sticker marked 2 as the figure below. Then turn over the screen film. The side marked 1 should be adhered to the screen and it is ok to first uncover it a little bit.
- Q:Can geomembranes be repaired?
- Yes, geomembranes can be repaired.
- Q:HDPE construction process of HDPE geomembrane
- A, The laying of HDPE geomembrane. 1. Corresponding qualified check and acceptance documents are needed before paving HDPE geomembrane. 2. Before cutting HDPE film, accurately measure its relavant size, and then cut according to reality. It is not suitable to cut according to icon size. It should be numbered by sheet and recorded in detail on the special form. 3. There should be minimum welding line during paving HDPE geomembrane. Save raw material as much as possible on the premise of quality assurance. At the same time, it is easy to ensure quality. 4. The lap?width of seam among films is usually not smaller than 10cm. Make orientation of welding line parallel to maximum gradient, namely, arrange along the gradient direction. 5. The seaming length should be shortened at corner and deformed section. Except special requirements, gradient is over 1: Except special requirements, gradient is over 1: Except special requirements, gradient is over 1: Except special requirements, gradient is over 1:
- Q:What is the expected lifespan of a geomembrane in a wastewater treatment plant?
- The expected lifespan of a geomembrane in a wastewater treatment plant can vary depending on various factors such as the quality of the material, installation techniques, and maintenance practices. On average, a well-designed and properly maintained geomembrane can last anywhere from 20 to 30 years. However, with advancements in technology and the use of high-quality materials, some geomembranes have been known to last even longer, exceeding 30 years.
- Q:Does any one know about that what kinds of PVC film can be used to make cabinet?
- As for PVC film, usually the imported type 35 to type 65 are more thick, domestic film is thin.
- Q:How to stick glass film and frosted film to the office windows?
- Clean the glass, and then coat water with liquid detergent, and paste window paper. Put it in place and remove the water and bubbles with a wiper. Frosted glass film can be stuck to the wall as long as it is smooth and flat. Matte film sticking can be divided into matte film sticking of ordinary glass and the touch screen. It is to turn the object with smooth surface into the rough surface. Advantages 1. Sticking film for frosted glasses add luster to the walls of the building and makes it look more beautiful. 2. Sticking film for frosted glass assists interior design and beautify office partitions. 3. We offer special labeling services of customized client icon / mark in frosted glass film application. 4. Sticking film on frosted glasses can create a privateness thus offering a private space with freedom. 5. Frosted glass film has rich color, flexible style with simple and practical originality. It is more beautiful and clearer than traditional glasses which is carved with pictures. 6. Frosted glass film can not only reduce visual interference, but also make full use of light. It is an excellent choice for office partitions, restaurants and stores. 7. Frosted glass film reduces harsh glare, relieves visual fatigue and protects eyesight, thus improving work environment of the building.
- Q:Are geomembranes recyclable?
- Yes, geomembranes are recyclable. They can be processed and transformed into new products, reducing waste and promoting sustainability in various industries such as agriculture, construction, and environmental protection.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Polyethylene Environmental Engineering Geomembrane for Radioactive or Hazardous Waste Liquid
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m²
- Supply Capability:
- 1000000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
