Resin - Petroleum Hydroleum Resin for Hot-Melt Road Marking Paint
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5 m.t.
- Supply Capability:
- 50000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1 Structure of Petroleum Resin Description
It is aromatic hydrocarbon resin, light yellow granular, with good transparency and luster, good solubility, compatibility, aqueous stability, insulation and chemical stability, and with good adhesiveness and heat conductivity.
2 Main Features of the Petroleum Resin
Softning point from 90 to 140, Light Colour, Granule, Better Fluidity, Transparent, Low Smell, Excellent antiaging Property, Quick Drying, Good Smudge Resistance
3 Petroleum Resin Images
4 Petroleum Resin Specification
| C9 | INDEX |
| Color (in 50% Toluene) | from No 7 to No.18 |
| Soften Point (DC) | 80-90; 100+/-5; 110+/-5; 120+/-5; 130+/-5; over 130 |
| Acid value (mgKOH/g) | 0.5max |
| Iodine value (g I2/100g) | 60-120 |
| Ash value | 0.1% max. |
| PH value | 6-8 |
Usage of C9:
1. Coating production: Used in paint and reinforced latex coating, also applied in oil soluble coating.
2. Rubber treatment: Used as adhesion booster.
3. Adhesive production: Used in adhesive, especially for melting glue and pressure-sensitive glue.
4. Printing ink production: It can be dissolved in hydrocarbon resin, it owns high soft point and stable performance, so it can be used in ink.
5. Paper making industry: Used in paper sizing agent.
6. Other application; Used as oil field water treatment agent & slurry additives, pitch modified agent.
| C5 | Index |
| Color (in 50% Toluene) | No.4-5 |
| Soften Point (DC) | 80-90; 90-100; 100-110; 110-120 |
| Acid value (mg/KOH/g) | 0.5% max. |
| Iodine value (g I2/100g) | 20/120 |
| Ash value | 0.1% max. |
Usage of C5:
1. Road marking paint: It can improve on the brightness, bonding, water and weather-resistance and may perfection for the dispersing and drying of any pigments.
2. Rubber: It goes compatible with both natural and synthetic rubber and characterized as adhesive, softening and reinforcement, it functions as an ideal for manufacturing of tyres and processing of any rubbers.
3. Adhesive: It is compatible well with high polymerization based substances, and is characteristic of excellent and stable bonding and heat resistance and changes retardant with both time and temperature.
Other application: It is also widely used in fields of oil ink, paper bonding, sealant etc.
5 FAQ of Petroleum Resin
1) How to control the products’ quality?
We have always placed great emphasis on quality control to ensure that excellent quality level is maintained. Moreover, the principle we always maintain is "to provide customers with better quality, better price and better service".
2) Can you provide OEM service?
Yes, we work on OEM orders.
3) What information should I let you know if I want to get a quotation?
1, Type of the products
2, Color Number(if have)
3, package
4, Quantities
5, Please send us some pictures for checking if possible so we can do best as your request. Otherwise, we will recommend relevant products with details for your reference.
4) How many days will sample be finished and how we control the sample charge?
Samples will be sent within 5 working days after we are in receipt of the payment. The sample charge is free, but the charges of shipping will be paid by the customer. You can pay the shipping charges by telex transfer(T/T),Payeasy.
- Q:Is PU and resin a thing?
- Resin is a kind of all plastic said, PU is a kind of polyurethane resin, and resin, PU is a good material of flexibility, better than the general resin material they say, but there are a lot of special resin material properties is better than PU.
- Q:according to speical realivity, how does time affect gravity and mass?
- They cause more damage to the roads so yes there should be a heavy tax for those who want to use them.
- Q:As a student what strategies & techniques you use in information retrieval on the internet?
- Hello there, You can use any electric drill for that purpose. The problem with most electric drills is that the jaws of the chuck do not close small enough for the small diamond drill bits you must use. You can buy a special chuck to replace the chuck on your drill. I have one equipped in that manner that I keep in a drill press. For small hand work I use either a Dremel tool or a flexible arm. The chucks on those are designed to handle the small drill bits. For metal, resin and probably glass you will not need a diamond drill bit (good thing because those get pricey and break easy). For the stones that may vary depending on their hardness. The crystalline stones, like rubies, will need a diamond bit. Softer stones like agate you can use a carborundum bit. For the softest stones, like turquoise, you can use metal bits on them. Also, it is a wise idea to keep the drill bit lubricated to reduce the heating. They make a special lube for that, also used with diamond blade saws, but for most operations water works to keep things cool enough. I assume you are a hobbyist wanting to do some bead work. I would suggest going to a hardware store (like Lowes) and buying a Dremel tool and a few small metal bits. That will work for most of what you will be doing. Later,
- Q:I have a 1969 house and the back side of the roof has a very flat pitch. I talked to a roofer that did his mom's house up the street, which is the same style as mine, and did rubber roof on the backside where it is less then the 2 inch rise/ft for shingles. I later read more on rubber roofing and I know that the petrolium in the asphalt shingles would destroy the epmd rubber if they touched but is there a proper way to make a seam at the roof cap to go from rubber on the flat backside to the cap and have asphalt front side?The roof is leaking in several places and did a lot with one bad snow storm that caused ice damming on the flat side. I was told a rubber roof would pretty much solve that problem. I have vaulted exposed beam ceilings with no attic and no insulation cavity so heat loss is excessive. I have also been searching for solutions to increase the R value of the roof. Right now all thats there is the birch on the inside, 2 inch buffalo board, then the shingles.
- well if i am with someone or someones next to me and say what is that smell aww was that you? hahaha and if not jus act like u heard a sudden noise and it was your shoe tht squeaked nice Q
- Q:Function and use of resin adhesive?
- Urea formaldehyde resin adhesive is a kind of used in wood and bamboo adhesives. It is made by condensation of urea and formaldehyde. Its main varieties are: 531 urea formaldehyde resin glue, 563 urea formaldehyde resin glue, 5001 urea formaldehyde resin adhesive. 531 urea formaldehyde resin can be cured at room temperature or heating conditions; 563 UF resin at room temperature by 8h or heated to 110. (and lasts 5 - 7min curing; 5001 urea formaldehyde resin adhesive must be added with industrial chlorinated adhesive solution (20%), and cured at room temperature or at heating. Urea formaldehyde lipid adhesive has the characteristics of five colors, good light resistance, low toxicity and low price. It is widely used in wood, bamboo, plywood and other wood materials.
- Q:What is resin chemistry?
- When some of the trees were injured, it will secrete a thick, a little sticky substance, sometimes it is solid, this is the resin (Resins). We often come into contact with benzoin (Benzoin) is a kind of resin.
- Q:A building has a lightning rod installed on its top. From a distance of 500ft from the building the angle of elevation to the top of the rod is 74 degrees and the angle of elevation to the bottom of the rod is 66 degrees. How tall is the rod?I tried to create a series of equations about the nested right triangles in this problem, where h height of the rod and x height of the building.tan 134 (h+x/500) and tan 66 (x/500). When i tried to solve the series (finding x and subbing the value into the first equation in the series. I got a really high negative value. I tried doing the problem again using series of arctan 140 (500/h+x) and tan 66 (h/500). Solving this I managed to get a value of 333.044, for the height of the lightning rod. Which seems bizarrely tall. Any help to see where I am going wrong in this problem is GREATLY appreciated.Thank you.
- Yes, silicone rubber is the mold material that will create multiple copies of the resin toy. Just lubricate the original/master and place it in a box. Pour the silicone rubber in carefully and avoid any bubbles forming as the toy is being covered. Once the rubber cures, carefully remove the original/master, then pour in the resin to make copies.
- Q:i had found an ipad that belong to a customer i feel that it was wrong i was with the company for 2yrs i was fired on dec 20 of 2011 can i sue them for wrongful termination what gets me is i was not told or aware that i had to turn somthing in to a manager if i find something in the parking lot
- Resin in the composite used by the dentist to fill a tooth. (filling) One surf posterior just means it is one surface (1 surf) of a tooth located in the back. (posterior) So, sounds like you need a simple filling on a rear tooth. Cheers!
- Q:What are some ideas to get a 5th grade boy for Christmas?
- Clear resin should be available at every good hardware store and large craft store (like Hobby Lobby and Michael's in the states) and at many hobby shops. If the molds have any complications, they are usually flexible, otherwise they are kept simple.
- Q:my hair is pretty dryed up and wanted to know if theres secrets to get hair growing faster and less dryed out?
- I have actually seen people use hot glue to coat things .also I have seen modge podge used.but epoxy sounds more permanent .you could chrck with photography stores I am sure they know about clear coats..clear contact paper might do the job I have seen pictures on tombstonescall a monument place they should know
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Resin - Petroleum Hydroleum Resin for Hot-Melt Road Marking Paint
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5 m.t.
- Supply Capability:
- 50000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
