Resin C9 Petroleum Hydroleum for Adhesives and Ink
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5 m.t.
- Supply Capability:
- 50000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1 Structure of Petroleum Resin Description
It is aromatic hydrocarbon resin, light yellow granular, with good transparency and luster, good solubility, compatibility, aqueous stability, insulation and chemical stability, and with good adhesiveness and heat conductivity.
2 Main Features of the Petroleum Resin
Softning point from 90 to 140, Light Colour, Granule, Better Fluidity, Transparent, Low Smell, Excellent antiaging Property, Quick Drying, Good Smudge Resistance
3 Petroleum Resin Images
4 Petroleum Resin Specification
| C9 | INDEX |
| Color (in 50% Toluene) | from No 7 to No.18 |
| Soften Point (DC) | 80-90; 100+/-5; 110+/-5; 120+/-5; 130+/-5; over 130 |
| Acid value (mgKOH/g) | 0.5max |
| Iodine value (g I2/100g) | 60-120 |
| Ash value | 0.1% max. |
| PH value | 6-8 |
Usage of C9:
1. Coating production: Used in paint and reinforced latex coating, also applied in oil soluble coating.
2. Rubber treatment: Used as adhesion booster.
3. Adhesive production: Used in adhesive, especially for melting glue and pressure-sensitive glue.
4. Printing ink production: It can be dissolved in hydrocarbon resin, it owns high soft point and stable performance, so it can be used in ink.
5. Paper making industry: Used in paper sizing agent.
6. Other application; Used as oil field water treatment agent & slurry additives, pitch modified agent.
| C5 | Index |
| Color (in 50% Toluene) | No.4-5 |
| Soften Point (DC) | 80-90; 90-100; 100-110; 110-120 |
| Acid value (mg/KOH/g) | 0.5% max. |
| Iodine value (g I2/100g) | 20/120 |
| Ash value | 0.1% max. |
Usage of C5:
1. Road marking paint: It can improve on the brightness, bonding, water and weather-resistance and may perfection for the dispersing and drying of any pigments.
2. Rubber: It goes compatible with both natural and synthetic rubber and characterized as adhesive, softening and reinforcement, it functions as an ideal for manufacturing of tyres and processing of any rubbers.
3. Adhesive: It is compatible well with high polymerization based substances, and is characteristic of excellent and stable bonding and heat resistance and changes retardant with both time and temperature.
Other application: It is also widely used in fields of oil ink, paper bonding, sealant etc.
5 FAQ of Petroleum Resin
1) How to control the products’ quality?
We have always placed great emphasis on quality control to ensure that excellent quality level is maintained. Moreover, the principle we always maintain is "to provide customers with better quality, better price and better service".
2) Can you provide OEM service?
Yes, we work on OEM orders.
3) What information should I let you know if I want to get a quotation?
1, Type of the products
2, Color Number(if have)
3, package
4, Quantities
5, Please send us some pictures for checking if possible so we can do best as your request. Otherwise, we will recommend relevant products with details for your reference.
4) How many days will sample be finished and how we control the sample charge?
Samples will be sent within 5 working days after we are in receipt of the payment. The sample charge is free, but the charges of shipping will be paid by the customer. You can pay the shipping charges by telex transfer(T/T),Payeasy.
- Q: I am replacing several pieces of galvanized water pipes leading to my house. Several people have told me to use teflon tape and pipe dope on the threads while others have said only pipe dope. The pipe dope I am using has a teflon lubricant. I noticed on one fitting where I tried using both, then had to take it back apart, that with the dope on it, the tape wouldn't hold its position like it does by itself. Instead, the pipe just seems to push the tape up as it is screwed on. That makes me lean more towards the dope by itself. Also, the directions on the bottle say to apply the dope to the bare threads. What should I do?
- Well, I haven't worked with resin yet (I want to though), but I don't see why you couldn't. If the resin was really hot and you were using a plastic candy mold, then it might melt, but I think it would work! You'll never know until you try. C:
- Q: Just want to ask does anyone spent lots of money on a ABS lip kit and broke it on a speed bump? and how much do you pay for paint job and installation on your lip kit?
- Its like a battlefield were all heel stables take on all face hereos
- Q: What can be used to make phenolic resins not so thick?
- You look at the specific phenolic resin is thermoplastic or thermosetting, the thermoplastic with ethyl acetate, dichloromethane or benzyl alcohol and so on can be diluted, want to quickly reduce the viscosity of phenolic does not reduce the solid content you can add about 0.1-0.5% PPE or two methyl silicone modified polyether, the viscosity was down the.
- Q: I am at the part where you have to jump for the water wheel thing to get in the window but i cant figure it out! Can anyone help me?!?
- I learnt the hard way, as you are! Clean the outside of your pipe with wire wool, use an acid flux smear over your nice clean end, Warm the pipe from behind your joint, apply some solder, while its flowing, rub the wire wool around the pipe to give you a nice smooth shiny tinned pipe. Clean the inside of your fitting well, and apply flux to the bits, slip the bits together, to be sure the flux is well distributed a turn helps. Now, gently heat, better to heat the larger part ('T' or Elbow) and let the heat conduct through. As soon as the solder flows, take the heat off, else you will 'dry' the solder (it will go a dark colour if you dry it) If it needs cosmetic tidying, be very careful.As you will use acid flux, give your work a good wash over/flush.
- Q: How can ion exchange resin be activated?
- The method is applicable to the activation of anion and cation exchange resin in the treatment of chrome plating wastewater by ion exchange
- Q: My glove compartment doesn't have a latch so it's open all the time. Am I allowed to tape it shut with duct tape or if I just uninstall the whole compartment? What will happen at the driving test if I don't have a secured compartment? Does the test just get postponed or I get marked off points?
- Resin is made up of smoke which stuck to the inside of the pipe. Since weed smoke gets you high, smoking coagulated weed smoke will also get you high, only it's kind of a froggy-throated downer high.
- Q: We need to install a CO2 detector. We have the unit, but no instructions. Should it be installed closer to the ceiling or closer to the floor? And why? .
- If you say that the tree is weeping its resin, you're clearly describing something that you see. The drops of resin oozing from the tree look like tears leaking from someone's eyes. That's visual imagery. (When a person weeps, that's something that you can see and also hear. But you obviously can't hear the resin weeping from a cherry tree.)
- Q: Can the epoxy floor paint brush the cement floor in the house? Is it poisonous? If so, what's the specific proposal?
- As a result of long-term residence or sealing, in addition to specific environmental effects, the home is best to use home improvement paint.
- Q: What is resin synthetic leather?
- Resin synthetic leather (synthetic leather) is divided into several categories according to its composition:The first is PVC (polyvinyl chloride), the products of which are combustion, water, carbon dioxide and chlorine compounds, and even chlorine;The second is PE (polyethylene), which, when fully burned, theoretically produces only water and carbon dioxide;Third, and most commonly known, PU leather (polyurethane) whose products are fully burned include water, carbon dioxide, nitrogen, and a small amount of nitrogen containing compounds.
- Q: My dog is small (Chihuahua) but sheds excessively. Her hair is everywhere which I know is all apart of having a pet that sheds. I have hardwood floors and sweeping gets the majority but the hair is still on the furniture, clothes and even in my shoes :) Would a hand dust vac help?
- Polyester resins are the most common but anything will work as you found out with your bioplastic resin :) **** That is correct Jon due to the green movement your bioplastic resin would have a shot in this market. If you are looking to start up you own company you might be able to qualify for some of the new grants.
Send your message to us
Resin C9 Petroleum Hydroleum for Adhesives and Ink
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5 m.t.
- Supply Capability:
- 50000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
