Pegamento Para Geomembrana de Alta Calidad PE/EVA/ECB
- Loading Port:
- Qingdao Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 10000m2 m²
- Supply Capability:
- 3000 Tons Per Year m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction of PE/EVA/ECB Geomembrane:
Geomembrane including LDPE, LLDPE, HDPE, EVA, ECB and PVC geomembrane.
Application of PE/EVA/ECB Geomembrane:
Prevent leakage disposal in waste burying field, waste water, or waste dregs disposing field.
River bank, lake dam, mine remaining, reservoir, tunnel, liquid storage pool(pit, mine)
Preventing leakage of subway, basement, tunnel, holes
Anti-slot leakage in roadbed and other groundsill
The plan direction laying of dam, the vertical direction laying for groundsill, used in the construction fence and waste material field.
Used in seawater or freshwater feed field.
Used in groundsill of road, highway, railway and waterproof layer of swelling clay and wet collapsed loess.
Preventing leakage on rooftop
Specification of of PE/EVA/ECB Geomembrane:
Item |
Test Value | |||
EVA |
ECB |
PE | ||
Thickness(mm) |
0.2~4 | |||
Width(m) |
2.5~8 | |||
Tensile Strength at Break(Mpa) |
18 |
17 |
18 | |
Elongation at break(%) |
650 |
600 |
600 | |
Tear Strength(KN/M) |
100 |
95 |
95 | |
Impermeability(0.3MPa/24h) |
No Leakage | |||
Bending at low temperature(℃) |
-35 |
-35 |
-35 | |
Stretch tensor at heating(mm) |
≤Elongation |
2 |
2 |
2 |
≤Shrink |
6 |
6 |
6 | |
Air Oven Aging |
Tensile strength at break |
16 |
14 |
15 |
Elongation at Break |
600 |
550 |
550 | |
Anti-alkali(Saturated solution of Ca(OH)2 X 168H) |
Tensile strength at break |
17 |
16 |
16 |
Elongation at break |
600 |
600 |
550 | |
Nurture Weathering at manual Simulation |
Tensile strength at break retained % |
80 |
80 |
80 |
Elongation at break retained % |
70 |
70 |
70 | |
Puncture Strength |
1.5mm |
300 |
300 |
300 |
2.0mm |
400 |
400 |
400 | |
2.5mm |
500 |
500 |
500 | |
3.0mm |
600 |
600 |
600 |
- Q: What are the design considerations for geomembranes in landfill construction?
- Some of the key design considerations for geomembranes in landfill construction include selecting a geomembrane material that is chemically resistant to prevent leakage of hazardous substances, ensuring proper thickness and strength to withstand the weight of waste and environmental factors, considering the installation process to minimize damage and ensure proper seam integrity, and incorporating proper slope and anchorage design to prevent geomembrane movement. Additionally, considerations for long-term durability, monitoring systems, and maintenance should also be taken into account during the design process.
- Q: Which kind of computer anti-reflective screen film is better?
- Personally recommend the following kinds: Film of PP material is soft, with poor translucency, having no function of anti-scratch and anti-abrasion, which can only prevent dust. Since the result is not good, it is now basically abandoned by consumers. Film of PVC material is soft and easy to paste, but relatively thick, whose light transmittance performance is not very good. And if tearing down the film, there will be residue on he mobile phone screen, affecting the appearance. Film of PET material has high translucency, which has no residue after being peeled off and small bubbles in the middle of the film. But, the film has higher reflectance, preventing users from clearly seeing the words on the screen, and easy to leave fingerprints and other traces on the surface at the same time.
- Q: How do geomembranes contribute to the prevention of soil erosion in land reclamation projects?
- Geomembranes contribute to the prevention of soil erosion in land reclamation projects by acting as a barrier between the soil and external factors such as water and wind. These impermeable membranes effectively control the movement of water, preventing it from infiltrating into the soil and eroding it. Additionally, geomembranes help to stabilize the soil by reducing surface runoff and protecting it from the erosive forces of wind. Overall, they provide a protective layer that significantly minimizes soil erosion, ensuring the success and sustainability of land reclamation projects.
- Q: What are the differences between composite geo-membrane and geosynthetic clay liner?
- geomembrane is made of water-proof material for water and seepage prevention. composite geo-membrane is compounded by geomembrane and pervious material. To composite pervious material on geomembrane can protect the geomembrane, increase friction coefficient and permeability in the flat. geosynthetic clay liner is made of two layers of pervious material and one layer of impervious bentonite. geosynthetic clay liner is also used for water and seepage prevention. But because the waterproof and impermeable material is clay which has little, it is not as good as geomembrane in terms of water and seepage prevention. There is a reason for the emergence of the product. Once tiny destructive hole appears, the clay will automatically fill it under pressure, that is to say, it has self-healing effect. The difference between the two: First, geomembrane has better waterproof and anti-seepage effect. Second, geosynthetic clay liner has self-healing role. Third, geosynthetic clay liner has little permeability. As for permeability: The permeability coefficient of geomembrane is less than 10 negative 11 cm3 per second. The permeability?coefficient of geosynthetic clay liner is about 10 negative 9 cm3 per second.
- Q: Can geomembranes be used in geothermal applications?
- Yes, geomembranes can be used in geothermal applications. Geomembranes are impermeable liners that prevent the leakage of fluids and gases. In geothermal applications, they can be used to line the geothermal reservoirs and prevent the loss of heat or the contamination of surrounding soil and groundwater. Additionally, geomembranes can be used as thermal barriers or insulation to enhance the efficiency of geothermal systems.
- Q: What are the advantages of membrane switch series?
- 1. Folding membrane switch. It is usually printed the pattern symmetrical in the upper and lower circuit on the same side of the membrane, and folded along the graphical symmetry axis to form the upper and lower circuit which constitutes corresponding contact of a set of switches keyboard under the action of the spacer layer. This is called folding circuit. 2. Double-plate membrane switch. It is printed two contacts of a set of switches, and wires and leads of the switch contact on two membranes respectively, constituting the upper and lower circuit of the switch. The double-chip circuit, for its lead is not folded, overcomes some of the defect of the folding circuit.
- Q: How do geomembranes improve the efficiency of sludge dewatering?
- Geomembranes improve the efficiency of sludge dewatering by acting as a barrier that prevents the escape of water during the dewatering process. They create a confined environment, allowing the sludge to retain more moisture while the excess water is effectively drained out. This results in faster and more effective dewatering, reducing the volume and weight of the sludge, and improving overall efficiency.
- Q: How is PTC electrothermal?film?
- Electrothermal film has high thermal efficiency and radiation heat. PTC circulates air by the fan, which is similar to air conditioner.
- Q: Water is the water base wallpaper wallpaper glue?
- Water is the water base wallpaper wallpaper glue? It is a professional alkali resistant, moistureproof, mouldproof wall treatment materials, can effectively prevent the construction of the base surface of the tidal water and alkaline material extravasation, avoiding of wall decoration materials: Such as wallpaper, paint, plywood, decorative board, damp moldy black bad damage.
- Q: Can geomembranes be installed underwater?
- Yes, geomembranes can be installed underwater. They are commonly used in various water containment applications such as ponds, reservoirs, and wastewater treatment systems. The installation process typically involves specialized techniques to ensure proper sealing and stability underwater.
1. Manufacturer Overview
Location | Shandong, China |
Year Established | 1998 |
Annual Output Value | Above US$ 20 Million |
Main Markets | 20.00% North America 20.00% South America 10.00% Eastern Europe 10.00% Southeast Asia 10.00% Northern Europe 10.00% South Asia 10.00% Western Europe 5.00% Africa 5.00% Mid East |
Company Certifications | ISO9001:2008 |
2. Manufacturer Certificates
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability
a) Trade Capacity | |
Nearest Port | Qingdao Port,China |
Export Percentage | 41-50% |
No.of Employees in Trade Department | 5-10 People |
Language Spoken: | English; Chinese; Russian; Spanish |
b) Factory Information | |
Factory Size: | Above 100,000 square meters |
No. of Production Lines | Above 10 |
Contract Manufacturing | Design Service Offered; Buyer Label Offered |
Product Price Range | High; Average |
Send your message to us
Pegamento Para Geomembrana de Alta Calidad PE/EVA/ECB
- Loading Port:
- Qingdao Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 10000m2 m²
- Supply Capability:
- 3000 Tons Per Year m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords