Mobile Aluminium Work Platform(single mast)-double duty
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
| Model | AMWP6.5-1000 | ||
| Safe working load | kg | 250 | |
| Maximum working height | mm | 6500 | |
| Overall length | mm | 1540 | |
| Overall width | mm | 1200 | |
| Overall height | mm | 1820 | |
| Working platform size | mm | 1200X1190 | |
| Minimum ground clearance | mm | 60 | |
| Wheelbase | mm | 1290 | |
| Min turning radius inner/outer wheel | mm | 850/2000 | |
| Driving motor | 2×24VDC/0.5kw | ||
| Lifting motor | 24VDC/2kw | ||
| Travel Speed | Stowed | km/h | 4 |
| Lifting | km/h | 1.1 | |
| Lifting/ descending speed | sec | 43/35 | |
| Accumulator | 2×12V/120Ah | ||
| Charger | 24A/12A | ||
| Gradeability | % | 25 | |
| Max angle | º | 1.5 | |
| Rear wheel | mm | Ф250×80 | |
| Front wheel | mm | Ф250×80 | |
| Overall weight | kg | 950 | |
Standard Configuration
-Can bus line intelligent controller
-Proportional controller
-Charge indicator
-Working chronometer
-Transport standard forklift hole
-Electric circuit fault code display
-Low voltage alarm
-Emergency descending button
-Extended platform
-Charge protection
-Horn
-Tilt protection
-Tilt alarm
-Driving motor overtemperature protection
-Multi-language
-4x2 drive
-Overload limit
-Standard platform
-Tube bracket
- Q: Reader is on unimproved private road half fuel load distant from nearest known public assistance in outdoor recreationvehicle presently owned. For whatever reason the enginecannot be made to operate. Dead zone prevents cel' CB.To signal distant passer-by what are your resources? Whatare symbols that denote specific problems for aircraft fly-by?
- hi there S O S, in a clearing close to your car made from bright clothing or logs around 5 feet in height, a signal mirror,or flash light, SOS is dot,dot dot dash dash dash dot dot dot. a smokey fire to direct overhead rescue, to your position. good luck.
- Q: again?510 511 145
- If you like your Camaro (and anything/one else on the road), you'll leave the driving to someone else-- --unless you plan to stay put for a good number of non-drinking hours after 5 beers.
- Q: Where can my client find brochures for medical supplies manufacturing machinery?
- He would need to know the manufacturer of the machine.
- Q: find the yearly depreciation of the machinery
- (40000-5000)/10= $3500
- Q: I am not talking about homemade reloading. I'm talking about pooling up some money with some of my friends to buy commercial bullet/ammunition making machinery equipment, to manufacture our own ammunition from scratch, from the basic materials such as powder, lead, brass, and copper to the finished product = 1 fully assembled round of ammo.Due to the ammo shortage I see now, I see a great investment and commercial opportunity. Lead, copper, brass, and powder can be found in vast quantities, but ammo is in a shortage. But if I have the machines to melt, process, and combine these materials, I no longer have an ammo shortage. Where can I buy commercial ammo making machinery?
- In reality you WON'T save money by reloading 5.56,7.62x39 or 54R,there is just too much cheap stuff available and you will take too long recouping your costs when accounting for the press,dies,accessory equipment plus your consumables-and THEN add in your time. Reloading works well to gain accuracy or load for expensive or less supported cartridges-I reload for a 300 WSM instead of spending $40+ a box,so reloading for the other rifles is a bonus save/accuracy gain. If you had a WSM,Weatherby proprietary,RUM,RSAUM, boutique cartridges, 375 HH or larger;or things like a hot 6.5 x 55 Swede load,7mm Mauser,etc it would return your investment quickly. Your 300 Win Mag might get some accuracy gains and of course you can load specific bullets,but when you add a pistol cartridge you start needing a turret press instead of a single stage-almost doubles the press cost. Not going to dissuade you from reloading for what you can gain,but economically,it takes a while to see a benefit-and in the Russian loads you are dealing with questionable accuracy gains anyway. Best thing is to see what the Lee,RCBS,Redding,Hornady kits have in common-press,scale,hand primer, Lube Pad,etc-add to that a decent dial caliper,case trimmer of some type(Lee and RCBS take two TOTALLY different approaches),tumbler,and a bullet puller maybe.
- Q: The state stipulates that the machinery processing industry accident how to compensate?
- The basic requirements of mechanical equipment in the whole period of machinery safety regulations, may be due to mechanical failure of the equipment itself, jeopardize the security of all types of accidents have been understood and occupation health caused by injury and avoid unnecessary physical consumption, with operators, mental tension and fatigue. Whether it is design or machine safety predetermined function, should follow two basic methods: proper structure design choice, as far as possible to avoid or reduce the risk; by reducing the operator's involvement in dangerous areas, in low risk people
- Q: What mechanical keyboard do you use for dota?
- Logitech? Razer? Do you understand? Stop talking nonsense. Does Logitech have a mechanical keyboard? Razer's mechanical keyboard seems to be the only black widow. Razer's keyboard is all fooling around. I suggest you look at the FILCO masters series. No need to all key red two generation. You can't buy a generation without a full key.
- Q: I was reading a thread about chemical engineering and noticed someone said that chemical engineers design machinery used to mass produce products created by chemist. Is this true?
- Yeah they can. Machinery's predominantly designed my mechanical engineers, but it's not uncommon for a chemical engineer to do it too, or do aspects of the overall design.
- Q: Material costs, machinery costs, management costs, labor costs accounted for the proportion of construction projects
- 5, travel expenses, property insurance, 6, 7, 8, engineering maintenance fees, sewage charges, 9, labor protection fees, inspection fees, 10 test, 11, outside the unit management fee, 12, finishing materials and sporadic freight, 13, material shortage and damage
- Q: In Australia, the original fauna never evolved to a bright height, the marsupials occupying the peak.Is it due to the harsh arid Australian environment?
- Marsupials actually originated in North America 193 to 186 million years ago.
Send your message to us
Mobile Aluminium Work Platform(single mast)-double duty
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
Related keywords
