Magnesium Slabs for the Vibration Testing Platform/Tables with size 380mm x 1250mm max.
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 kg
- Supply Capability:
- 20000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Features of Megnesium Alloy Slab:
Magnesium slab is used to make magnesium tooling plate or feed to the magnesium slab extrusion or magnesium slab rolling mill to get magnesium sheet. It is too difficult to get a evenly alloying element distribution in the slab because of the low weight, melt point and the lively chemistry of magnesium.
High specific strength, elastic modulus, good heat dissipation and eliminate shock resistance to withstand the shock load capacity than aluminum,organic matter and alkali resistance and good corrosion .Mainly used in aviation, aerospace, transportation, chemical, rockets and other industrial sectors. In the utility metal is the lightest metal and the proportion of magnesium is about 2/3 of aluminum, iron 1/4. It is the lightest metal in practical metal, high strength, high rigidity.
2.We produce magnesium alloy sheet conforms to MIL-T-38749(USAF) Standard.
. Material were supplied in condition without any defect, bend or warpage.
.100% Ultrasonic inspection would be done and cleared as per AMS 2630 CLASS-A.
. Protective coating should be provided in the material before dispatching
. Material Test certificates showing Chemical composition, Mechanical properties,and Ultrasonic inspection should be supplied along with the material.
a. Yield strength (Y S) 165 MPa
b. Ultimate Tensile Strength (U T S) 255 MPa
c. Percentage of Elongation (% E) 12 - 15
d. Hardness 45 (Each group of products has different hardness,tolerance : +/- 5%
3.Details of Megnesium Alloy:
Designation | Chemical Composition, less than | ||||||||
Al | Zn | Mn | Ce | Fe | Si | Cu | Ni | Mg | |
AZ31B | 2.5-3.5 | 0.6-1.4 | 0.2-1.0 | - | 0.01 | 0.08 | 0.01 | 0.001 | Balance |
AZ61 | 5.8-7.2 | 0.4-1.5 | 0.15-0.5 | - | 0.005 | 0.10 | 0.05 | 0.001 | Balance |
AZ80 | 7.8-9.2 | 0.2-0.8 | 0.12-0.5 | - | - | 0.10 | 0.05 | 0.005 | Balance |
ME20M | 0.20 | 0.30 | 1.3-2.2 | 0.15-0.35 | 0.05 | 0.10 | 0.05 | 0.007 | Balance |
4.Megnesium Alloys image:
5.FAQ
We have organized several common questions for our clients，may help you sincerely：
①How about your company？
A world class manufacturer & supplier of magnesium alloys slab, plates&sheets, magnesium alloy bars, Magnesium alloy slabs,magensium alloy wires,magnesium alloy tubes and etc.. bases in China,consisting of both casting foundry forging and machining factory. Annually more than 8000 tons Precision casting and forging parts are exported to markets in Europe,America and Japan. OEM casting and forging service available according to customer’s requirement.
②How to guarantee the quality of the products？
We have established the international advanced quality management system，every link from raw material to final product we have strict quality test；We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.
③How long can we receive the product after purchase?
In the purchase of magnesium alloys product within three working days, We will arrange the factory delivery as soon as possible. The pecific time of receiving is related to the state and position of customers.Commonly 7 to 10 working days can be served.
- Q: What are the properties of metals?*Metals conduct heat and electricity.**Metals tend to lose electrons in reactions.*Metals usually are poor conductors of heat and electricity.Metals have shiny appearance.Metals tend to gain electrons in reactions.*Metals are ductile.**Metals are malleable.*Metals are not malleable.Am I wrong?? It says I am, but what am I missing? Thanks!
- Reporting in! I love Folk Metal and Black Metal most. Immortal Finntroll Korpiklaani Gorgoroth
- Q: Why is this considered Black Metal?
- The most active metals are in the groups furthest to the left. Therefore the answer is: A) Alkali Metals, also known as Group 1. They are the most active because of the presence of only 1 valence electron...making them easily ready to bond. I hope that helped! :D
- Q: This may sound stupid, but could someone please tell me all the diffrent types of metal and explain them??
- Chromium is regarded with great interest because of its high corrosion resistance and hardness. 18 % Chromium and 11% nickel form stainless steel which is very durable steel and does not corrode. Chromium is a very strong , hard and durable metal even in elemental form. They use chromium to electroplate a hard surface onto steel shafts of hydraulic cylinders. It also is the famous chrome plate that is used for show on motorcycles and show cars. It doesn't corrode and it takes heat very well and is resistant to acids, greases and general bad environments including salt water.
- Q: Here is the question:Someone left two containers on the lab bench but there were no labels on the bottles with the names of the chemicals inside. If one bottle contains a metal and one bottle contains a non-metal, how could you tell which is which?
- METALS ARE MOSTLY SOLIDS AT ROOM TEMPERATURE(EXEPT MERCURY WHICH IS A LIQUID) AND THEY ARE MALLAEBLE AND DUCTILE.THEY ALSO HAVE LUSTURE (SHINE). NON METALS ARE MOSTLY SOLIDS AND GASES AT ROOM TEMPERATURE(EXEPT BROMINE WHICH IS A LIQUID)THEY DO NOT HAVE ANY OF THE PROPERTIES THAT METALS POSSES. METALLOIDS POSSES PROPERTIES OF BOTH METALS AS WELL AS NON METALS.
- Q: Please name a kind of metal, the definition of that metal and a band of that kind of metal
- You can not use lye on aluminum. It can be pitted. Go to an auto constituents store and purchase four hundred grit moist or dry sandpaper. Sand the metallic soft with a drop of detergent as a lubricant.
- Q: 10 pts. for the most knowledgable metal head on here.
- False metal is basically the musicians who try to make heavy music using the most basic, formulaic templates. The only reason many of these artist joined the genre is to treat it as a business and make some financial gain. Even if a band is technically metal, they can still do a disservice to the genre by watering it down, oversimplifying it, or making it a commodity. Glam metal, nu-metal, deathcore, and some metalcore bands have done exactly that. However, I feel it's worth mentioning that some metalcore bands are perfectly acceptable, such as Botch, Converge or Zao. However, all of those groups lean more towards the hardcore side, and their goal isn't really to wade heavily into the metal genre. They're composing very respectable music, but it's so focused in the hardcore genre that it doesn't really matter. However, when it comes to bands like Bullet For My Valentine and Trivium, I know exactly where you're coming from. Those sorts of bands have provided metal with a terrible facade in the mainstream eye, and it's very unfortunate. False metal can also describe some modern bands who do nothing but worship the old styles. They're incapable of coming up with anything original or fresh, so they resort to repeating the past in a very stale, boring manner. Take, for example, bands like Warbringer and Municipal Waste; both of these bands were formed after 2000, but they're trying to sound as if they're from the 80's. I love 80's thrash metal as much as the next metalhead, but we need fresh material, not the regurgitation of other artists' past glories. You should read the articles from the metal journalist website, Lamentations of the Flame Princess. They have a lot of very interesting (although incredibly long) articles about false metal and other similar subjects. They're all a great read, and go incredibly in-depth.
- Q: displacement reaction of metals
- Metal is a sub-genre of Rock.
- Q: I admit, I'm a bit of a newbie to metal. I need some help with all these odd sub-genres. Can you tell me the types and give me a band or two for each one, please? Any and all help is appreciated. Thank you. :)
- Evile
- Q: urgently need a list of strongest to weakest metals
- Ya it is fairly sturdy in case you like a tacticool AK-40 seven. I choose classic AK's myself. CYMA makes better AKs yet JG continues to be very sturdy. and that i don't be responsive to if the sight will mount. That AK has an RIS rail so it is generally rather elementary to mount issues to it.
- Q: should i get metal gear rising,metal gear solid 4,or metal gear solid 3 on 3ds
- HIM aren't Gothic metal. Real Gothic metal would be Moonspell and Dreadful Shadows.
Send your message to us
Magnesium Slabs for the Vibration Testing Platform/Tables with size 380mm x 1250mm max.
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 kg
- Supply Capability:
- 20000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
