High Quality PP-R double female threaded concealed stop valve
- Ref Price:
-
$18.09
/ watt
- Loading Port:
- Ningbo
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1000 watt
- Supply Capability:
- 100000 watt/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
Heavy stop valve size:1/2'',3/4''
1.Material:Random Polypropylene(Hyosung R200P);
2.ISO9001&ISO14001;
3.Standard:GB/T 18742.3-2002, DIN8077/8078;
4.OEM also ok
- Q: Is the valve clockwise?
- Tap water valve is generally divided into two kinds, one is ball valve, and the other is gate valve. The ball valve wrench is vertical when the water pipe is closed, is a twist or reverse, 90 degrees wrench and water pipe is open when the direction; valve handwheel clockwise turn off, anti clockwise turn is open. Valve in the application should not be twisted too tight, so as to avoid the thread buckle, spool off. Ball valve applications save effort and durability.
- Q: What are the valves at home?
- Valve used in the family is commonly used, the following are several:On the water pipe are: total table of the ball valve (32mm), in charge of the (25mm), as well as for the toilet, washbasin, water heater angle valve (20mm).Other commonly used gas pipelines, valves, pressure reducing valves and the like.
- Q: Where is the Shanghai valve? What brand is good?
- Shanghai has four well-known valves: Shanghai high valve group Co. Ltd., Shanghai Valve Co., Ltd. Shanghai Jinggong valve factory, Shanghai Valve Factory Co., Ltd.
- Q: In the decoration, I do not know where to get the valve, what kind of products should be bought?It is hard to fit the valve in the water inlet of the house. If not, can you? Will it have any effect on future use?
- Common valve position is few, 1 or 2 wash basin faucet pipe toilet pool 3 4 water heater 5 water washing machineThese positions require only simple ball valves or globe valves. Gas valves need not be considered, provided by gas installation companies (specific standards).The main valve can achieve the above water source control, the installation of the branch valve is to take into account the maintenance is convenient, does not affect other water.
- Q: What does valve DN50/80 mean?
- DN refers to the nominal diameter unit mm, that is, the diameter of the pipe. DN 5080 is the diameter of 50mm 80mm
- Q: Representation of several types of valves
- Valve body material:Z grey castings (usually not shown)X malleable ironQ nodular cast ironT copper alloyB lead alloyII chromium molybdenum alloy steelL chrome alloyP chromium nickel steelV (II) chromium molybdenum vanadium alloy steelR cr.ni.mo.ti steelF fluoroplasticP leather (Shen Penggang)S plasticD nitrided steelCJ lining adhesiveTC magnetic boringCS lined plasticCQ lined with leadW sealing ring is machined from valve body, C carbon steel (generally not shown)G ferrosilicon
- Q: How to better maintain the valve?
- How to maintain the valve?Enter the same as other mechanical products, but also the need for maintenance. This work well, can extend the service life of the valve, the following will introduce the valve maintenanceStorage and maintenanceThe maintenance of the purpose is to keep the valve in the custody of the damage, or lower quality. In fact, improper storage is one of the important reasons for valve damageThe valve custody, should be arranged in good order, a small valve on the shelves, large valves can be neatly arranged in the warehouse on the ground, not arbitrary lumber pile, do not let the flange face contact with the ground. This is not only for beauty, mainly to protect the valve, not to touch badBecause the storage and handling properly, hand wheel broken, crooked stem touch the fixed nut hand wheel and stem loosening loss and so on, these should avoid unnecessary losses.We temporarily on the short-term use of the valve, should remove the asbestos packing, in order to avoid electrochemical corrosion damage to the valve stem.I just entered the library on the valve, to conduct inspections, such as during transport into the water or dirt to wipe clean, re storedThe import and export of valves to use wax paper or plastic sheet sealed to prevent dirt insideThe valves on the machined surface rust in the atmosphere should be coated with anti rust oil, protectI placed outside the valve, must be covered with linoleum or tarpaulins like rain, dust items. Keep the storage of the valve clean and dry
- Q: What is the term "Z41H-16C" on the line?
- The ram of the Z41H-16C is linear with the stem, called (also known as the bar gate valve). Usually there is a trapezoidal thread on the lifter. The rotating motion is changed into a straight line through the nut at the top of the valve and the guide groove on the valve body. That is to say, the operating torque is changed into the operating thrust.
- Q: What are the general types of valves?
- Valve is a control component in the fluid delivery system. It has the functions of closing, adjusting, guiding, preventing reverse flow, stabilizing voltage, shunting or overflow and releasing pressure.Function and use(1) cut off categories: such as gate valve, globe valve, plug valve, ball valve, butterfly valve, needle valve, diaphragm valve and so on. Cut off valve, also known as closed-circuit valve, stop valve, whose role is to connect or cut off the pipeline medium.Check valves, also known as check valves or non-return valves, check valves belong to an automatic valve, its role is to prevent the pipeline medium backflow, to prevent the pump and drive motor reversal, as well as the leakage of container media. Pump water off the bottom valve check valve also belongs to class.The function of the relief valve is to prevent the medium pressure in the pipeline or device from exceeding the required value so as to achieve the purpose of safety protection.Control valve, throttle valve and pressure reducing valve, its role is to regulate the media pressure, flow and other parameters.(2) vacuum type: such as vacuum ball valve, vacuum flapper valve, vacuum air charging valve, pneumatic vacuum valve, etc.. Its function is to change the direction of the air flow in the vacuum system, adjust the air flow rate, cut off or connect the vacuum system of the pipeline, and the component is called the vacuum valve.(3) special uses such as pigging valves, vent valves, drain valves, exhaust valves, filters, etc.. The exhaust valve is an essential auxiliary component in the pipeline system. It is widely used in boilers, air conditioners, petroleum, natural gas, water supply and drainage pipelines. Often installed in the commanding heights or elbows, etc., to exclude excess gas pipeline, pipe road to improve the use of efficiency and reduce energy consumption.
- Q: How can the material be checked by valve approach? What experiments do you need?
- May refer to the valve pressure test principle and the pressure test matters needing attention.(1) in general, the valve shall not be subject to strength test, but the body and bonnet shall be subjected to strength tests after the repair of the valve body and bonnet or corrosion damage. For the relief valve, the constant pressure and seat return pressure and other tests shall be in accordance with the specifications and the relevant regulations.(2) the installation of the valve should be done for strength and tightness test. Low pressure valve sampling 20%, if not qualified should be 100% of the inspection; medium and high pressure valve should be 100% of the inspection.(3) the installation position of the valve shall be in the direction of easy inspection during the test.(4) welding connection valve, not with blind plate pressure test can be used when the cone seal or O ring seal pressure test.(5) when hydraulic test, the valve air will be excluded as much as possible.(6) the pressure should be increased gradually during the test, and the pressure will not be sudden and sudden.(7) strength test and sealed test duration is generally 2~3min, important and special valves should last 5min. Small caliber valve test time can be a little shorter, large caliber valve test time can be longer. During the test, the test time can be extended if in doubt. Strength test, does not allow the body and bonnet sweating or leakage. Sealing test, the general rotor valve only once, the safety valve, high pressure valve and other raw valve to be carried out two times. When testing for the low pressure, large diameter valve is not important and there are provisions to allow leakage of the valve, allowing a small amount of leakage; the common valve, power station valve, marine valves and other valve requirements vary on leakage requirements according to relevant regulations.
Send your message to us
High Quality PP-R double female threaded concealed stop valve
- Ref Price:
-
$18.09
/ watt
- Loading Port:
- Ningbo
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1000 watt
- Supply Capability:
- 100000 watt/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
