Air Evacuation Valve with Solar Water Heater Exhaust Valves and Solar Water Heater Parts from China
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Packaging & Delivery
Packaging Detail: | standard export packing, steel pallets, wooden pallets, customers required |
Delivery Detail: | 10 Days |
Air Evacuation Valve Specifications
1. good structure
2. pressure and impact
3. stability performance
Air Evacuation Valve Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo. Then the film works and adjusts the air pressure back into the safety range.
2.Product Introduction
Air Evacuation Valve (So-called Ash Silo Relief Valve or Ash Silo Vacuum Relief Valve): is mainly used on the top of the Steel Silo or Ash Silo to release the extra pressure so that it will stay at a safe range all the time. Vacuum Relief Valve is made up of lid, spring ring, movable ring, film, spring of the retainer ring, retainer ring, valve lid, Valve base.
Air Evacuation Valve is considered as a must-have facility for the ash silo.The pressure may change when the air stream inflows the ash silo or outflows, or the temperature rises or reduces. Release Valve protects the silo from safety hazard
3.Working Principle
1.Static status: Once you set up a pressure range. Normally, pressuer could be maintained at a stable level in the ash silo.The valve lid keeps static, and the whole valve is completely sealed.
2.Pressure-Release Status: when the pressure rises upon the setted range, the valve lid would be opened automatically to release the extra airstream.As the pressure goes down to the standard level, the valve lid would be closed automatically.
3.Vacuum-Released Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo.Then the film works and adjusts the air pressure back into the safety range.So that, Relief Valve protects the silo from safety hazard.
4.Features
1. Customized is allowed.
2. Installing in welding or bolts.
3. Factory price.
4. Stock any time.
5. Positive rating:100%.
6. Neccessary device in storage silo.
5.Our Services
Private Customized:
We design different Pressure Relief Valve according to specific requirement.
Customers’ Guidance:
Please leave the following info in inquiry
1. What’s the raw material ( carbon steel or stainless steel )
2. What’s the entrance diameter( 508 mm /273 mm or customized)
Because with these factors, we are able to give you a fast answer.
- Q:How can the material be checked by valve approach? What experiments do you need?
- First of all, to check material certification, and secondly, the material appearance, shape and size of the initial test, again on the alloy material according to the standard spectrum analysis, the valve to do pressure test.
- Q:The general signal valve installation, or other valve installation is not installed with the groove flange clamp hoop Yucca or direct way? What's the convenient way to install the following diagram? I don't understand. Neither groove, flange nor hoop. Thank you, sir!
- For clip type, the two flanges on the pipe are drawn with studs, and the middle is the butterfly valve
- Q:How to carry out the valve strength test and air tightness test?
- Refer to the GB/T13927 or ISO5208 standards and need to pass it to you
- Q:How do you understand the valve Z41X-16?
- This is a standard set, the landlord himself to check the JB/T308 standard, Baidu library, some, and is free to download:JB/T 308-2004 valve type method of preparation clear EditionZ = gate valve4 = connection: flange1 = structural form: open rod single gateX = sealing surface material: Rubber16 = nominal pressure: 1.6MPa16 there is no letter behind it indicates that the body is made of cast iron
- Q:Is there any difference between the valve and the water valve?
- There is no difference between the low pressure lubricating oil pump, as long as the excuse right on the line, not to pressure, design pressure ball valve common does not exceed 3MP, the maximum pressure of only small gear pump vane pump is 2.5MP, the other piston pump, gear pump, the pressure is above 6.3MP. Certainly not. Unless using high pressure water pipe valve.
- Q:What does the whole copper valve mean?
- The whole valve is made of copper material. In addition to the ceramic core.
- Q:What's the caliber of the valve 1/4?
- 1 inches, =25.4 millimeters, 1/4 inches, =2/8 inches, =2 minutes, =DN8 (mm)3/8 inches =3 points =DN10 (mm)1/2 inches, =4/8 inches, =4 minutes, =DN15 (mm)3/4 inches, =6/8 inches, =6 minutes, =DN20 (mm)1 inches =DN25 (mm)1 1/4 inch =DN32 (mm)1 1/2 inch =DN40 (mm)2 inches =DN50 (mm)
- Q:What do you mean by the 16 bit coding of the valve type?
- What kind of coding do you mean? Valve type? Stress? Do you have these?Profit ZF43Y-250C-DN50.. Do you mean this one? ZF43Y valve type. Flat gate valve250C. Refers to the 250 pressure, C is carbon steel, DN50 refers to the caliber of the valve specificationsI hope you mean this one
- Q:Ketem valve relative to other valve companies in the industry what are the advantages?
- Floating seal: electric drive, electric ball valve flange connection floating ball straight, seal form with seal, the sealing surface of the valve seat material for hard alloy, nominal pressure PN16~PN63, nominal size DN15~DN200, suitable temperature of -28~500, the valve body is made of carbon steel or stainless steel. As a result of the use of hard sealing (metal seal), this valve is particularly suitable for particles, solids, slurry and other medium and high temperature and high pressure pipelines.
- Q:What is the main function of the valve?
- Valve is a control component in the fluid delivery system. It has the functions of closing, adjusting, guiding, preventing reverse flow, stabilizing voltage, shunting or overflow and releasing pressure.Valves used in fluid control systems, from the simplest stop valve to a very complex automatic control system used in a variety of valves, a wide range of varieties and specifications. Valves can be used to control air, water, steam, a variety of corrosive media, mud, oil, liquid metal and radioactive media and other types of fluid flow. The valve according to the material is divided into cast iron valves, cast steel valves, stainless steel valves (201, 304, 316), chrome molybdenum steel, chromium molybdenum vanadium steel valves, valve, dual phase steel valves, plastic valves, non-standard customized valve material etc..
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Air Evacuation Valve with Solar Water Heater Exhaust Valves and Solar Water Heater Parts from China
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords