High Glossy Polished Porcelain Tile Double Loading Natural Stone Serie CMAX27601
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 m²
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
High Glossy Polished Porcelain Tile Double Loading Natural Stone Serie CMAX27601 is one of the most popular color in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its special vein, being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.
Product Features
Polished Porcelain Tile, Double Loading
Only Grade AAA available
Strict control on color shade, deformation, anti-pollution, surface glossy degree as well as packing
Competitive price
Standard export packing: Pater Carton+ Wooden Pallet
Fast delivery
OEM service could be offered
Marketing support on samples, catalogues as well as carton designing
Professional sales team for product, document and schedule of importing and exporting.
Product Specification
Tile Type: Polished Porcelain Tile
Quality standard: GB/T4100-2006, ISO13006, EN 14411
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Rupture Modulus: 》40 MPa
Length and Width Tolerance: ±0.1%
Surface Smoothness: ±0.15%
Edge Straightness: ±0.15%
Wearing Strength: 《1600 mm3
Glossiness: 》 85 Degree
Resistance to Chemical: Class UA
Resistance to Staining: Class 3.
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl
For 800x800mm, 3pcs/Ctn, 28 Ctns/Pallet, 616 Ctns/20’Fcl, 1182.72m2/20’Fcl
Production Line & Package
FAQ
1. For Polished Porcelain Tile, is the 80*80 available?
—— Yes, 80*80 is available. In addition, the size 100*100 and 60*120 are also availbale. Based on customer's requirement, 40*80 could be cut from basic size 80*80.
2. What is the MOQ for this tile?
—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.
3. Can we use the carton with our own design and brand name?
—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers, due to the carton factory can’t arrange production if quantity is below 5000 pcs.
- Q: Our new kitchen tile floor was grouted last Thursday (almost a week ago). They did a poor job removing grout from the tile surface - very rough ceramic tile. I‘ve washed and scrubbed, it is cemented on. On top of that I don‘t like the grout color.Nothing has been sealed. So I got some acid wash and a grout stain from Home Depot. The stain says the tile should have been sealed prior to using it, I dont understand why that is. So I dont stain the tile? I‘m afraid if I sealed the tile it would seal the grout, so seems like a bad idea.And the acid wash... is this going to ruin the grout itself? How careful do I need to be about not getting in on the grout? Unfortunately its a large area, kitchen and dining area. 12‘ x 30‘. I‘ll be scrubbing a long time.Any suggestions to make this easier?Thanks!
- howdy break of day, i'm an affiliate from the domicile Depot in the states and that i artwork in the flooring/tile branch at my save, and that i see various circumstances like yours with my clientele. Fishlakeguy is solid approximately employing a grout remover on the tiles themselves. in case you have thick accumulations and buildups, between the main suitable grout removers to apply is sulfamic acid and a solid metallic scraper for any thick aspects. The sulfamic acid dissolves any layers of haze, smears, or only enormous aspects on your tile. The dry combination in crystal form can blend with water to in spite of power or diluted ratio you may choose to apply. Scrub it on with a solid pair of gloves along with your sponge, and don't hardship, its secure to apply on tile and elementary to apply. Use a splash muscle with the scraper for any enormous aspects of the grout and repeat the acid wash for the thick aspects. the main nevertheless, is to reseal your sparkling tile and grout later on because of the fact the remover (any remover you utilize somewhat) took off additionally the layer of sealant on the surfaces you basically wiped sparkling. that would desire to make your tile look great back, desire this helps you out aboveaveragejoe
- Q: the kitchen is pretty spacious, but is it possible to put tiles on top of wood?
- You can do either, but as one person mentioned, there is a possibility that the old linoleum is backed with a material containing asbestos. Just lay the cement on top of the vinyl, leveling as you go. Another advantage to this method is that you might decide you want wood floors at some point and you might ruin it if you apply the new tile to the wood.
- Q: I would like to know what steps to take to prepare the concrete floor for ceramic tile. Part of the floor is cement and part is painted. Do I have to prepare the painted portion before tiling?
- I tile every day of my life and since the paint is assumed to be part of some aesthetic over concrete, you can scuff it with a wire brush, belt sander, grinder, cleaning all debris. Beyond that, concrete, unless sealed, is a prime substrate for tile/mortar. Certainly you should check for level, as in depressions or any rise, then proceed as is standard Measure snap two perpendicular center lines adjust those lines for cuts and the least waste work from deep in to an exit point test level with a level or hand use a 1/4 in. toothed rectangular trowel to spread mortar use a poly based mortar use rubber spacers at 1/4 or 1/8 inch do not press aggressively save cuts and cut installs for last and do not attempt to kneel on tiles installed to add a piece missed perhaps remove cove base if it exists to replace later wait no less than 24 hours for dry/set time use Poly blend grout of you choice in color mix both mortar and grout to mashed potato consistency fill grout spaces after removing spacers use a rectangular rubberized spreader/squeegie wipe with a barely damp sponge first time then in 2 or 3 re-wipes as the grout sets you can increase dampness (grout sets faster than mortar) by the third wipe of grout excess you should be ok and notice upon drying a DUST that can easily be mopped away after the fact. allow 24 hrs for grout dry/set If you have a pedestal sink, pull it. Pull the toilet as well Tile to the sewage drain flange and replace with a new wax ring with a rubber flange extender embedded. Mop clean after two days and enjoy Steven Wolf Just my two sense
- Q: I have thinset my slate tiles in place, and washed any thin set off as best as I can with water. I can‘t seem to get some of the thinset marks off, how important is this? Also, how long should I let the tiles dry before I can seal them? (I want to seal before grouting). One last thing, my sealer product says to grout 2 hours after sealing? This seems fast...will the sealer be dry enough?
- Yikes! in case you seal the tile till now you grout, you will have bonding issues, grout to tile. you're able to desire to alter the feel of the floor of the grout to be helpful. The invisible, penetrating sealers won't comfortable out the grout floor, it incredibly is a prerequisite for protecting it sparkling. make certain you have a sufficiant coat to be helpful. as some distance by using fact the kind is going, ask your tile corporation who lays the main tile interior the section. That installer provides you with the final tip on your grout sealer.
- Q: I have a basement about 25X25 does anyone know how much it would cost to put vinyl tile down?
- The self adhesive vinyl tile, which you can do yourself costs anywhere from 89cents to 99cents at home depot. Figure any where from $560-$620 as an average price. Good luck on your project!
- Q: I am renovating, and have always loved white coloured tiles but am now starting to like these light coloured hardwood Tasmanian Oak Floorboards ....I have no idea on prices yet, what would cost more? and which one would look more beautiful??PS- i would NEVER put floating floorboards - they are cheap and nasty!
- Hardwoods are classic. You can never go wrong with hardwood floors as far as resell value. I renovated two years ago. We have a 1500 sq/ft home. We did tile in the bath and hardwoods everywhere else. My husband wanted to tile the kitchen as well but we were talked out of it due to labor costs. Cleaning tile grout is troublesome, sealing it is ineffective if you have food stains or mud or something. My tile floors are very pretty but I regret it. Be sure to get real hardwood with NO laminate at all. Some hardwood floors are real wood on the surface but laminated onto a synthetic bottom. Be careful that way. Things to ask before choosing: How many times can they be refinished? Are they glued or nailed? (Glued are crappy, nailing is much more effective.) How do I clean them? (I use a steamer, no chemicals.) Will my subfloor support the hardwood? (we had to install a new subfloor). Oak and Hickory are the best HARD woods to choose from.
- Q: I have installed tile around my shower and and ready to fill in the gaps between the tile. Grouting looks messy and I don‘t know how to do it. Is there a grout that comes in a tube that can be put into a caulk gun? Can I just caulk the whole thing? This one is new to me so any help is appreciated!!!
- Grout is very easy to apply, especially if you use the tiny spacer blocks between the tiles to get the grout lines even. It is messy, but the extra wipes up cleanly with a sponge and water. Caulk is used between the bottom of the tile and the top of the tub because it's flexible and moves when the tub is filled. A solid hard grout line would break.
- Q: Remodeling a bathroom, using 4x4 ceramic wall tiles and have an old porcelain wall-mount sink.QUESTION: Do I put screws through the tile and put the mount OVER the tile, hanging the sink that way OR do I hang the sink on the untiled wall and tile around it?Thanks for your help!
- Hanging Sink
- Q: The last people to live in my house decided to use black spray paint on the bathroom tiles and it looks awful (not to mention the fact that it is peeling and uneven as it wasn‘t done properly). However the tiles underneath are blue and white so I would like to keep them. What is the best way to remove the black paint without scratching the surface of the ceramic tiles?
- The best way to remove paint without ruining the tiles with scrape marks is to use a chemical stripper. Try a spot in an inconspicuous place. My only concern for you is that the grout might have absorbed the black paint so the black tinting may remain once the paint is removed from the tile. Your test spot will reveal the results and you can decide to follow through with the rest of the room or not. Sometimes you have to wonder what the hell goes through the minds of people when they decide to do home improvements. I
Send your message to us
High Glossy Polished Porcelain Tile Double Loading Natural Stone Serie CMAX27601
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 m²
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
