Good quality floor porcelain tile , Fashion Porcelanato Polished Tile
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 m²
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1. Description of Good quality floor porcelain tile
Ceramic tile, is a kind of refractory metal oxides and metal oxide, by grinding, mixing, pressing, glazing, the sintering process, it bcomes acid and alkali resistant porcelain or stone construction or decoration materials, such of these called ceramic tile. Its raw materials are mixture of clay, quartz sand and so on.
According to craft and characteristic, Ceramic tile can be divided into Glaze tile, Full body tile, polishing tile, Rustic tile, Vitrified tile and Mosaic etc. Different characteristics has its own best usage way.
2. Features of Good quality floor porcelain tile
Glazed tile: refers to the brick burn with glaze layer surface. This kind of brick is divided into two categories: one is the use of clay firing; Another is made of porcelain clay fire, about 80% of the buyers choose it as ground decorates material.
Full body tile: this is a non-glazed porcelain tiles, has good skid resistance and abrasion resistance. Usually said "slippery prevented floor tile" were mostly body brick. Because the price moderate, it is quite popular with consumers.
Polished tile: it is polished, this kind of tilt is with high hardness, very wear-resisting.
Vitrified tile: it is made from high temperature. Vitrified tile is the most hard of all ceramic tile.
Ceramic Mosaic: also known as Mosaic, with more specifications, thin and small, hard, acid-proof, alkali resistance.
3. Specifications of Good quality floor porcelain tile
Porcelain floor tile,ceramic tile,wall tile,full polished porcelain tile
Sizes: 600 x 600, 800 x 800mm, many choices are available
Thicknesses: 9.3-9.5mm
water absorption rate: 10%-18%
Size: 300*300MM,300*450MM,300*600MM
Surface: smooth
Min. order quantity:500 SQM
Certificates: CE and ISO9001
Usage area: Be suitable for market, hospital, metro, school, office building, hotel, real estate, bar and living room etc.
Package: standard export paper carton with wooden pallet
Payment terms: T/T or irrevocable L/C at sight
Delivery time: With 20 days after deposit
4. Images of Good quality floor porcelain tile
5. FAQ
1) Where it could be applicated?
The living room, kitchen, bathroom, balcony wall ground and local background wall etc.
2) Are free samples available?.
Yes. But express delivery cost is to be collected and we will pay it back after confirming the order.
3) What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order. Generally speaking, we suggest that you start inquiry two months before the date you would like to
get the products at your country.
4) What is your terms of delivery?
We accept EXW, FOB, CIF, etc. You can choose the one which is the most convenient or cost effective for you.
- Q: Bai Peng tiles origin? how is it?
- You have not provided the brand we have tested, to provide you with the method of selecting the tile, I hope to help you. 1 election origin Almost tiles on the market come from two places: Guangdong and Shandong. Guangdong brick overall quality is better than Shandong brick, domestic brands of ceramic tile origin is also generally from Guangdong, so a simple choice of Guangdong brick. (Shandong bricks are also good quality, but more need to blink of an eye). 2 to see flatness Flatness is very critical, if the flatness is very poor, it is difficult to shop in the edge of each tile are not the edge of the gap, there is not only the impact of visual effects affected, serious and even cause Ge (gè) feet. Figure tiles flatness is very poor gap is too large Method one: the same paragraph of the two tiles on the face of the table, his hands pinching side, observe the other side of the tilt, tilt the smaller, the higher the flatness. (This method is suitable for fully flattened bricks that do not apply to antique tiles and bricks with special craftsmanship)
- Q: Can I also use thin set to grout my tiles on counter? I‘m using white glazed ceramic tiles 4x4. If not what should I use? Please help
- As far as using the thin-set for the grout, that's not what it's meant for. While I have seen and heard of it being done, I don't see why you would since it just comes in the bland white/gray. They do make pre-mixed Mastic/Grout combo buckets, but again...they only come in the plain colors. You can use those if you really want to go that route, but the Thinset is a better bond. Invest in a nice modified type grout and you can get it in the right color, and have it turn out just right :D
- Q: how I can install ceramic tile on a wall and what tools do I need to do so? Any other tip that I should know about it to do a good job would be appreciated.
- no way you can learn from these idiots. get a book at the library or hire someone.
- Q: How to paste tiles better
- Precautions ????Tiles before the application of blisters, the number of bubbles can be built how much, do not all the one-time bubble finished, soaked with water to meet the construction progress of the workers. Due to improper mixing of cement and sand caused by the proportion or due to improper cement, cement, the proportion of large, strong adhesion of tiles, brick can quickly stick, but the high proportion of cement mixing, cement mortar expansion coefficient, easy After the paving the brick will be cracked. The recommended ratio of wall tiles is 1: 3, tiles are: 1: 2 - 3, cement cement is numbered 32.5 cement. Grinding to be careful not to damage the tile glaze layer, the link attention to the gap, not too small.
- Q: HiIs there an adhesive that can be used to spot repair Vinylfloor tiles 18x18 on a basment floor?
- You can buy the vinyl tile adhesive used to put down the tiles originally or use the same adhesive even if the tiles were peel stick. You'll need to scrape up the old adhesive though, or the tile will sit a touch higher than the rest and probably come loose again. You can also use contact cement gel. Again a smooth surface is needed. Give both the tile and the floor a generous coat and let the cement dry to the light touch. Then stick the tile down and put a weight on it. That should take care of it.
- Q: I am thinking about tiling 2 bathrooms in a rental property and planning to use 12x12 tiles costing $1 each. I want to use the same tiles for bathtub surrounds as well as floor. I am looking for some advice about the size of tiles that may be appropriate.Thanks
- I built my entire shower, floor, wall, and even ceiling with 12x12 looks great, but you have to be patient on the walls, and ceiling. I have put many 12x12's on the walls of tubs. Make sure you use something for the spacers for the wall or they will slide down. A thin strip of 3/8 plywood works great. If you ever put them on a ceiling you have to use screws with large washer, and glue. You can take the screws out once the glue is cured. To grout a ceiling you have to use silicone caulk and then dust the grout let dry and then seal. Makes for one cool looking bathroom.
- Q: Remodeling the bathroom...How can i drill a hole in ceramic tile...What kind of drill would I use..or what kind of file would be best to make a hole in the tile to go around the shower faucet..Thanks for your input...
- You can use a carbide hole cutter in an electric drill. Carbide hole cutters are like ordinary hole saws except the rim is carbide grit instead of teeth. You can get these an several different sizes so you should be able to find one the right size for your purpose. To start the drill, take a nail and hammer a small chip out of the glaze where you want the center of the hole to be, a light tap should do it, this will keep the bit from wandering over the surface and start the hole easier. If it is a wall tile it is probably fairly soft ceramic, not porcelain (which is usually used for floor tile), and it should not be too difficult to drill the hole once you get through the glaze.
- Q: i want to use broken tiles for flooring in the balcony. what is the procedure?? and how do i start??please suggest.
- I suggest that you first prep and fill your concrete and let dry. Next you should lay out some tile pieces on an area near your starting point fitting the pieces together like a jigsaw puzzle. Next spread some tile mastic over an area equal to the size of the area where you have laid out tile pieces that fit together. Next, quickly set the tiles in the mastic in the same pattern that you had them laid off to the side leaving at least about 1/8th gaps between the tile pieces. When you are finished, scrape off any mastic that does not have tile set in it. Repeat this process until you completely cover your floor. Allow to dry for a day and then fill the cracks with grout. Allow the grout to dry for a day and then do an acid wash to remove the grout residue.
- Q: Does all kinds of tiles calculate the formula per square meter? For example, a few pieces of 300X600 is a square meter?
- This is like a primary school students will be considered it! 300X600 unit is centimeter right, that is, 0.3X0.6 = 0.18 square meters, 1 square meter ÷ 0.18 = 5.555, that is, five and a half more than a little bit.
- Q: I have a few chips in my ceramic floor tile. It‘s a light natural color tile, so the chipped part is dark and noticeable. Is there anything that you can put in the chips to cover them up?
- Tile Chip Repair
Send your message to us
Good quality floor porcelain tile , Fashion Porcelanato Polished Tile
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 m²
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
