Glazed Porcelain Tile Urban Series Grey Color UR60C
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1105.92
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
Glazed Porcelain Tile Urban Series UR60C is one of the most popular color of UR Serie, which is one serie of Glazed Porcelain Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its being good quality as well as the reasonable price compared with other suppliers. This color is quite popular recently for different areas
Product Features
Glazed Porcelain Tile
Only Grade AAA available
Strict control on color shade, deformation, anti-pollution, surface flatness as well as packing
Competitive price
Standard export packing: Pater Carton+ Wooden Pallet
Fast delivery
OEM service could be offered
Marketing support on samples, catalogues as well as carton designing
Professional sales team for product, document and schedule of importing and exporting.
Product Specification
Tile Type: Glazed Porcelain Tile
Quality standard: GB/T4100-2006, ISO13006, ISO9001
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Rupture Modulus: 》40 MPa
Length and Width Tolerance: ±0.1%
Surface Smoothness: ±0.15%
Edge Straightness: ±0.15%
Wearing Strength: 《1600 mm3
Resistance to Chemical: Class UA
Resistance to Staining: Class 3.
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl
Production Line & Package
FAQ
1. For Glazed Porcelain Tile, is the 30*60 available?
—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 8 pcs are packed into one carton.
2. What is the MOQ for this tile?
—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.
3. Can we use the carton with our own design and brand name?
—— Yes. Normally we go with Neutral Carton or our Carton with our brand name. But for carton of client’s own design, the MOQ for one size is 5 containers, due to the carton factory can’t arrange production if quantity is below 5000 pcs.
- Q: My kitchen floor tile has a number dings or chips caused by something heavy falling on them. Is there a way to repair these without having to remove/replace the entire tile?
- Sorry to hear that.. Any tile will top chip inexpensive or not.. Just some more easy than others.. This depends on the type of tile..I ve always had people touch them up w/ an enamel touch up that you repair appliances with.. This will depend on colors of course .. Finger nail polish is a tougher touch up product to help too.. Not a cure or a fix but a hide.. Should you get more tile in the future and want to avoid this get a pure porcelain were color go all the way thru and not a porcelain bodied tile there is a difference GL
- Q: What is the tile diagonal
- Wall and floor tiles between the two corners of the straight line, but also to evaluate the quality of one of the standards of wall and floor tiles.
- Q: I clean a church and all the cleaners I have tried on the tile floor, leaving it streaky.. Does anyone know of anything that would work? Thanks!
- Look okorder . Everything you need to know about preserving and cleaning tile is located at this website.
- Q: I have three ceramic tiles that need a special curved cut. I‘m just looking for some place where I can take the tiles in and they cut them for me onsite and I walk out with my cut tiles. Home Depot doesn‘t offer this service. Who does? I live in Atlanta.
- your going to have to go to a real tile store for cutting holes and delicate curves and such. They wont charge you much. Be aware, a tile could still break even when being cut correctly. Most contractors wont be able to do this either. A so so curve can be cut on a wet tile saw. But, are you going to drive around building sites until you find a contractor with his tile saw set up ? :) Just find a real tile store, they will gladly do it. John
- Q: i‘m thinking about laying my own tile. ( this way i could save $2700) yeah, i know its a pain int he butt. BUT i‘m still going to do it because i like doing my own work. I‘m laying down 24x24 tiles. do you have any advice or secrete or techniques to offer? its a straight edge tile so i was thinking about using no spacers. I was also told to spread thinset on the tile in addition to the cement floor.
- Yes, 24x24 square edge tile is very accurately sized and can be laid with 1/16 joint. But only with careful attention to every detail. The slab needs to be dead on, less than 1/8 in ten feet variation. If a 10' straight edge placed on the slab has a space of more than 1/8 under it you will need self-leveling mortar. Flat trowel the back of each tile with thinset just prior to setting it. Move the notched trowel so all the ridges are parallel. Do not move the trowel in random directions. You will trap air under the tile and when you try to level them thinset will ooze out and make a mess. Try to apply thinset with the accuracy that once the tile is set it doesn't need to be adjusted. If the floor is flat, the thinset is consistant and the tile is accurate, you can't help but have a good floor I would reccomend at least 3/16 grout. Finish the grout as flat as possible, with new sponges and minimal water. Pre-seal the tile before grouting to make clean-up easy.
- Q: Following on from my previous question about tiles... I had asked if it's better to remove them or tile over the top. At that time, I thought they were bedded in the same stuff as the bathroom tiles were upstairs which was a very fine and compacted sandy stuff that was not set.However, after trying to remove a couple of the mosaic floor tiles in the kitchen, it seems they are bedded in the actual concrete floor itself !!! and instead of being able to remove them, it just chips the tile and breaks off the surface somewhat. They're extremely difficult to remove so: Will my new tiles be completely ok if set on top of these? can you please let me know how to prepare them and what to look out for?Height-wise it doesn't matter, I'll simply order shorter doors. I'm really concerned about the long term strength because it's a kitchen that will get a lot of use / humidity/ etc...Thank you
- looks like a serious problem...but u cannot tile over tiles-they will cause slipping and the fresh tiles will never set. best-use a really heavy tool to break the tiles and sewwp off the chips... then overlay with a finishing smooth layer of concrete and embed ur new tiles in it
- Q: What is the unit of the tile factory offer. Is the piece or square meter
- To film as a unit, huh, huh had just renovated.
- Q: we are constructing apartment....got a question about tile work..which is better, is it better to leave some gaps between tiles and is it better layout tiles with no gaps between them...the builder is suggesting the first option above...i prefer the second option...because with the first option, i feel there are chances of dirt getting clogged as time passess by...please advise
- The TYPE, size and style of tile determines the size of gap and the type of grout used. Sanded or unsanded. A general rule of thumb, and this is a general rule, 4x4 and most white (white not off white/tan) bodied tile takes almost no gap and tiles are self spacing and use an unsanded grout. Any thing larger and has a red/ tan /grayish or darker body takes a sanded grout and a space as small as 1/8 and no smaller and up to 1/2 grout size. Sealing all grout properly ( easy job) will help a lot in the staining of the grout. There is no choice , the proper gap and type of grout must be used or the grout can fail. Any questions you cane mail me through my avatar and check my qualifications there. GL
- Q: Okay so i live in an apartment and i cant EVER get mant. out here to fix this... the stuff thats between the tiles is missing and it looks gross and then the white rubber stuff that sits between the tub and the tile is coming off in random places.... what is this stuff called and would i be able to fix this junk myself???The white stuff that connects the tubs looks like that white stuff they use to connect the base boards to the hardwood floor...
- White Shower Tiles
- Q: Wondered what people‘s experiences were of the above in kitchens. The kitchen leads out into the back garden so the floor will be walked on an awful lot. Would flooring last or look as good after a year or would tiles be the way to go. Any info would be great before I make a purchase.Thanks
- Tile would be more durable. Wood will require more refinishing, but is more comfortable to stand on. Small area rugs/mats at entryways can go a long way to keeping the grit down and helping the wood floor surface last longer. It is a personal choice.
Send your message to us
Glazed Porcelain Tile Urban Series Grey Color UR60C
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1105.92
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
