Full Polished Glazed Porcelain Tile CMACJW001
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1209.6
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
Full Polished Glazed Porcelain Tile CMACJW001 is a very popular color in the present market. Just like other models, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its stone like surface, being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.
Product Features
Full Polished Porcelain Tile, high glossy
Grade AAA available only
Strict quality control system on color shade, deformation, anti-pollution, surface glossy degree as well as packing
Much more competitive price
Standard export packing: Pater Carton+ Wooden Pallet
Fast production arrangement
OEM service could be offered based on the actual requirement
Comprehensive marketing support on samples, catalogues as well as carton designing
Professional sales team available for the whole order operation process
Product Specification
Tile Type: Full Polished Glazed Porcelain Tile
Quality standard: GB/T4100-2006, ISO13006, ISO9001
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Rupture Modulus: 》40 MPa
Length and Width Tolerance: ±0.1%
Surface Smoothness: ±0.15%
Edge Straightness: ±0.15%
Wearing Strength: 《1600 mm3
Glossiness: 》 90 Degree
Resistance to Chemical: Class UA
Resistance to Staining: Class 3.
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, , 35KgS/Ctn, 36 Ctns/Pallet, 780 Ctns/20’Fcl, 1123.2 m2/20’Fcl
For 800x800mm, 3pcs/Ctn, 56Kgs/Ctn, 28 Ctns/Pallet, 500 Ctns/20’Fcl, 960 m2/20’Fcl
Production Line & Package
FAQ
1. Could you put some samples in the container of our orders?
—— Yes. We’d like to offer free samples in the containers to our clients, with a certain quantity of different models.
2. Can we use the carton with our own design and brand name?
—— Yes. Normally we go with Neutral Carton. If the order quantity is over 5 containers, we could print the carton of client’s design for the final packing.
3. Could you company supply polished porcelain tile?
—— Yes. We could supply various kinds of polished porcelain tile, with size 60*60, 80*80, 100*100 and 60*120.
- Q: How can I find out how many tiles I need to buy?
- It is sold by the s/f ,even if you buy a 8x8 tile for example. Some places will only sell in whole boxes.You ll need extra for cuts and waste anyway. When buying from the big box places ,look and make sure you get all the same dye lot and run number. If you buy from the mom and pop store, you ll get the same dye lot always. Should you need help figuring the area send me the measurements and tile size and I ll figure it for you. Go thru my avatar to get my e mail GL
- Q: the third tile. All three tiles types have the same side length. Determine the shape of the third tile type.
- Where 3 tiles meet, they must add up to a full 360°. The formula for the interior angle of a regular n-sided polygon is: ((n - 2)*180) / n Plugging in n=4, the interior angle of a square is 90° Plugging in n=5, the angle of a pentagon is 108° The angle of the third tile is x and the 3 angles must add up to a full 360°: 90 + 108 + x = 360 Solve for x: x = 360 - 198 x = 162 Plug that into the original equation and solve for n: ((n - 2) * 180) / n = 162 (n-2) * 180 = 162n n - 2 = (162/180)n n - (162/180)n = 2 (18/180)n = 2 (1/10)n = 2 n = 2 * 10 n = 20 So the third tile must be from a regular icosagon (20-sided polygon) Answer: Regular icosagon; see the picture below.
- Q: I have calculated that I need 388 tiles, each 9 inches big, how many come in one box?, I need to know how many boxes to order
- The contents of the boxes vary between manufactures. You need to work out how many square feet or square metres of tiles you need and add a bit on for wastage then check the boxes as they normally state how much coverage on box will give. P.S. don't forget the adhesive.
- Q: im looking for tips about PORCELAIN floor tiles.I read everywhere they can look like marble but without the maintenance issues, plus it is a harder material.I like the polished finishes .. and saw some samples of them.. rectified porcelain.I can‘t find much info on the net about its shape uniformity, but looks like they are kind of not so squared?I would like them big.. 24 inches, and spaced at the minimum which i think it is 1/8. But a few persons told me that is too close for porcelain and i should go with marble?The problem is that marble is much more expensive... so i don‘t know what to do.Are there brands of porcelain tiles known for their good uniformity... how should i shop for them.,? i don‘t know what to look for. please help.Please do not suggest any other type of flooring... im not interested. If porcelain is always not uniform, then what would the minimum spacing between tiles be so they look fine?Thanks a lot.
- I'm not sure what you're looking at but all the porcelain tiles I've seen are square. All square. Very square. There should be no uniformity issues whatsoever. Go to a home improvement store and take a look. The tile type really has very little effect on spacing. However if you want 24 tiles I would suggest 1/4 grout lines at least. It will be extremely difficult to maintain a straight even grout line If you go 1/8. Imagine, if for some reason one tile was out of square a little or slightly offline (which does happen) the grout line would disappear completely. The grout would also be more likely to break if there was any movement in the floor. If you insist on 1/8 spacing, it can be done, but the results will be almost definitely poor.
- Q: Does anyone know if I can lay ciramic tile over the dull worn out linoleum floor in my kitchen? I don‘t want to peel up the linolium because of the insane amount of labor it will take, and make the sub floor un even. any suggestions? Will tiles still stick to this material?Thanks!
- You don't have to remove the old linoleum. But, you must prepare the surface for tiling. If the floor flexes at all, you could end up with cracked tiles or grout just by walking on the floor. You also need to put something down over the linoleum surface for the tile to stick to. First, you nail down a layer of hardy-backer. This is about a 1/4 to 3/8-inch cement-based wallboard. Next, you have to float about 1/4 inch of mastic on the hardy-backer to make a nice, flat surface (like pouring a cement floor). You then put about a 15-pound slipsheet on top of the wet mastic and let it set. The slipsheet allows minute movements of the subfloor due to thermal expansion without stressing the set tile. Once the mastic sets (usually overnight), you can begin setting the tile.
- Q: I have a tile shower that is looking rather shabby. I‘ve been considering ripping the tile out and re-doing it, but I was given the suggestion of professionally refinishing the tile. Has anyone ever done this? What is involved? I‘m okay with the tile, but I‘d like it to look nicer than it does with out spending a ton of money.
- Usually it involves glazing, a type of sandblasting. Kits are available at major hardware stores and they can tell you exactly how to do it and save a bunch of money
- Q: How easy is it to tile a kitchen floor. Plus would you lay the tiles directly onto the concrete sub floor or lay concrete boards or chipboards underneath. I would also like to continue this to the hallway and under stairs. Thanks.
- Depending on the age of the cement subfloor, it would be my first choice, even if I had to prep it first to insure a good bond. Definitely not cement board, it's not designed or engineered to be walked on, the results downstream would be disastrous. There is a grade of board specifically called underlayment, and it would be my second choice. It needs to be nailed down to cement subfloor about every 6 inches in both directions, very tedious. Not so bad on wood, can be screwed down.This is not hard job, just hard work. Hands and knees, get up to cut a piece, back down to hands and knees. Spread mortar or adhesive, set tile, check for level, spread - set - level, over and over. And level in both directions, North - South, and East - West, and level from tile to tile as well. Really good tile setters make very good money. Very important for you to know: floor tile is thicker than wall tile. It should be 3/8 inch minimum, or 9 mm. Wall tile is generally thinner, and will crack under the stress of weight on it.
- Q: Over time the tiles in my apartment bathtub have turned yellow. It‘s not all of the tiles, just a few in the back/corner. I undoubtedly have hard water but I can‘t figure out why a few of these tiles are yellow. As far as I can tell, these are cheap plastic tiles (white). I have tried comet (with bleach), full strength bleach, vinegar/water solution, vinegar/baking soda, baking soda by itself, mr. clean magic eraser, and full strength CLR to no avail. The only thing that worked at all was using comet and scouring the tiles with steel wool. Although it scratched the surface, the actual scratch part wasn‘t noticeable. But there has to be an easier way than breaking my arm to get one tile cleaned. Any suggestions? If anyone wants I can email them a picture of the tiles.
- try using Zud cleaner. found in Home Depot.
- Q: okay so im a dancer, but i never really bothered to try tap. but since this year the company im on says i have to. I bought my shoes yesterday and i have to practice like crazy in two days because that when i start.:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::MAIN POINT!but i noticed the tile in my house is uneven like some of the corners and the sides come up and and really pointy(and sharp). IS IT BAD TO TAP ON UNEVEN TILE??WILL IT MESS UP MY TAP SHOES?
- itll scrape the metal and with the taps tile is VERY SLIPPERY!!! so beware!!!
- Q: currently have vinyl tile glued to concrete on grade. Want to install bamboo floor / engineered wood. Can we go on top of existing vinyl?
- Possibly. The vinyl tile must be well installed (not coming loose or bubbling or open seams, etc.). If the vinyl tile is a no wax or smooth surface, it may still need to be prepped with a palm sander and 80 grit just enough to give it some tooth. And finally, make certain to contact both manufacturers' reps or technical services to make certain that the new glue is compatible with both the vinyl and the bamboo... and to make certain that this endeavor will not void your warranty. Good luck.
Send your message to us
Full Polished Glazed Porcelain Tile CMACJW001
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1209.6
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
