Ceramic Fiber Blanket for Heat Seals in Kiln Doors
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 50000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction of Ceramic Fiber Module for Heat Seals for Kiln Door
Ceramic Fiber Module for Heat Seals for Kiln Door is made from long special ceramic fiber, formed by special strong double surface needling, without any binder ,increasing inter-weaving and tensile strength, so that ceramic fiber blanket own good stability under any working temperature.
Types of Ceramic Fiber Module for Heat Seals for Kiln Door: ordinary type, standard form, high-purity type, high-alumina type and containing zirconium type. Different types of products used different materials. Performance of Ceramic Fiber Module for Heat Seals for Kiln Door also has difference, and they are suitable for different working temperatures.
Main Characteristics of the Ceramic Fiber Module for Heat Seals for Kiln Door
◆Good springiness for fiber
◆Excellent strength and resistance to blowing
◆Excellent chemical stability
◆Low thermal conductivity
◆Low thermal shrinkage
◆Excellent sound absorption
Application of Ceramic Fiber Module for Heat Seals for Kiln Door
◆Petrochemical process heater refractory fiber lining
◆General furnace backup insulation
◆Electrical insulator
◆Heat seals for kiln car or furnace door
◆High temperature acoustic
◆Fire protection
◆Filling insulation and joint sealing
◆Back-up lining for industrial furnaces
◆Fireproof materials for construction
Ceramic Fiber Module for Heat Seals for Kiln Door Images
Ceramic Fiber Module for Heat Seals for Kiln Door Specification
Type | STD | HP | HA | HZ | |
Classification Temperature (°C) | 1260 | 1260 | 1350 | 1430 | |
Working Temperature (°C) | 1050 | 1100 | 1200 | 1350 | |
Color | Spotlessly white | spotlessly | spotlessly | spotlessly | |
white | white | white | |||
Density (kg/m3) | 64,96, | 64,96, | 64,96, | 64,96, | |
128,160 | 128,160 | 128,160 | 128,160 | ||
Shrinkage on heating (%) | ≤3 | ≤3 | ≤3.5 | ≤3.5 | |
(24 hours, density as 128/m3) | (1150°C) | (1250°C) | (1300°C) | (1350°C) | |
Thermal conductivity by different temperature (w/m.k) (density as 128kg/m3) | 0.15(800°C) | 0.176(800°C) | 0.18(1000°C) | 0.23(1000°C | |
0.17(1000°C) | 0.22(1000°C) | 0.26(1200°C) | 0.31(1200°C) | ||
Tensile strength (MPa) | 0.04 | 0.04 | 0.04 | 0.04 | |
(density as 128kg/m3) | |||||
Chemical | AL2O3 | 45-47 | 45-46 | 53-55 | 38-54 |
composition | AL2O3+SIO2 | 98.5 | 99 | 99 | 82-90 |
(%) | ZrO2 | - | - | - | 10-18 |
FAQ of Ceramic Fiber Module for Heat Seals for Kiln Door
Q1:Are you a manufacture or trader?
A:Factory+trade(mainly factories,at the same time,we operates other related products).
Q2:Can we visit your factory?
A:Sure,welcome at any time,seeing is believing.
Q3:What's the MOQ of trial order?
A:No limit,We can offer the best suggestions and solutions according to your condition.
Q4:Is your company accept customization?
A:We have own factory and excellent technical team,and we accept OEM service.
Q5:How about your company's certification?
A:ISO9001 and Test Report,also we could apply other necessary certification.
Q6:How to slove the quality problems?
A:If the products are not confirmed to customer samples or have quality problems,our compay will be responsible to make compensation for it.
Q7:Can you accept OEM for Ceramic Fiber Insulation Roll?
A:YES! We can according your demand to produce.
Q8:Can U accept the detective of the third-party verification company ?
A:YES! We can accept the detective from any third-party verification company including the SGS, BV and so on.
- Q: please explain!
- Ja Rule - New York Moby - New York New York Sting - Englishman in New York Eagles - In a New York Minute REM - Leaving New York Madonna - I Love New York Bob Dylan - Talking New York Simon Garfunkel - A Heart in New York
- Q: hair straightener, remington, SUCKS! it straightens my hair fairly decent but it leaves my hair smelling burnt and some of my hair pieces get all frizzy and like burnt or somethingi had an amazing straightener it was like some french name but i cant get that one again because the last one i had like popped and stopped workinggso, what to do you guys recommend? nothing really expensive pleasethankss (:
- That's kind of hard to do without knowing what your food preferences areHowever, here's my favorite way to fix New York strip steak, which is my current food passionMarinate the steak for several hours in Worchestershire sauce, a few tablespoons of water, and a shake or two of onion and garlic powderGrill over medium coals until the steak is to your liking(I prefer medium well.) While the steak is cooking, saute some chopped green pepper, sliced mushrooms, and slivered onions in butter or margarinePut the steak on a serving plate, pour the drained veggies over it, and top with a few crumbles of bleu cheese (if you like it.) Simple and delicious!
- Q: I have a Goldenretreiver, hes about 5 years old and is the best retreiver i've ever had.
- The thermal coefficient should not be a great concern in a telescope, as long as the focusing mechanism can compensate for the change in telescope length in the range of temperatures expected for its use, and as long as the telescope is given time to adjust to the ambient temperature before it's usedYou would not want your telescope to be warmer or colder than surrounding air anyhow, because of concerns relating to condensation or air turbulence.
- Q: Ok, here's the thingI got 5 estimates about replacing my HVAC systemNo problemThree of the five looked in my attic and said I need to replace the duct system completely as the insulation is hanging off, plastic showing, etc(It's probably over 20 years old)One person did not even look up in the atticOne other looked and said it needed to be replaced in certain sections, and two say it needs to be replaced completely citing that the plastic is showing and not in the best conditionThe last guy who looked says it looks good, does not need to be replaced, just put new insulation on the areas where it is hangingHe said the plastic is not brittle, so the whole thing does not need to be replacedSee my confustion here? I have ascertained that the duct needs attentionThat I believeBut whether the whole thing needs replacing is the questionShould I replace the whole thing (more money) or just certain sections as recommended? Be serious please.
- Tough decision Are you planning to keep this house very long? If you plan to sell within the next 2 years, then just patch the insulation where it needs itIf you are planning to keep the house for a long time, then I think you should replace the whole thingKeep in mind that your new and highly efficient air carrier ducts will pay for itself in lowered electricity bills over the course of several years.
- Q: My hair is always frizzy,how can I make it not so frizzy and a lot softer looking?:)
- It does not to any extent further than the different gases interior the ambience doextreme tiers of water vapour interior the ambience would point out that the wind is coming off the sea, wherein case, temperatures would be cooler than if the wind comes off the land in summer time however the water vapour itself does not impact the temperature.
- Q: Concerning diabetes.does carbohydrates good or bad for diabetic?
- Aluminium oxide has the formula Al2O3 because in an ionic compound, in order to be neutral, the charges of each ion must be counteracted by the opposite chargeAl forms a 3+ ion and O forms a 2- ion To make the charges match each other, with the smallest number of atoms possible, I look for the smallest common multiple of 2 and 3, which is 6 Therefore to cancel each other out, the Als must have a charge of 6+ and the Os must have have -6 chargeTo make the charge of the Al 6+, I added a an Al atom to the formula Al2 Then to make the charge of the O 6-, I added two Os, giving 3 O atomsHence my formula Al2O3
- Q: okay so yesterday I got this tiny little ball of cotton yarnI got really excited and do you guys think this is weird? (would any of you peeps out there get excited over this?)
- I get totally excited over yarns, embroidery floss, thread, sewing notions and fabric! This isn't weird - the colors and textures are what get us inspired to do a project.
- Q: i have a house built in the fiftys at that time they place a wood siding boards on the frame then alumin it was removed and vinyle was installed boards rotted lots drafts now here my ideal1 remove everything down to wooden frame place osb board on frame then insulation board/sound proof then tyvec it then vinly sidingis this a good way or is there a better way this is all extireor of the house
- A very thin layer of gold is bonded (electroplated) to a base metalThe piece of jewelry won't contain as much gold as regular 14kt, therefore the cost is lessElectroplate jewelry that is done well can, however, hold up well and be attractive.
- Q: I'm a college student so I don't really have time to cook anythingThe only type of food that I am able to eat are sandwich and microwavable frozen vegetableSo, the only types of grain I consume are stone ground whole grain and whole wheatI recently noticed that I have been getting diarrhea more often and I know that it's because of the high amount of fiber I consume everyday from eating whole grain/wheat sandwiches (Usually 8-9 servings of all wheat/grain per day)I try to drink 10 glass of water a day, but I can usually make it to around 8 and that's it.How long does it take for my body to get used to a high fiber diet?
- if you can get to the floor joists under the second floor you can install what is known as sound deadening board between the joiststhis is s a kind of thick board made of paper.
Send your message to us
Ceramic Fiber Blanket for Heat Seals in Kiln Doors
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 50000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
