Ceramic Fiber Blanket for Kiln Door Heat Seals
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 9 roll
- Supply Capability:
- 50000 roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction of Ceramic Fiber Blanket for Heat Seals for Kiln Door
Ceramic Fiber Blanket for Heat Seals for Kiln Door is made from long special ceramic fiber, formed by special strong double surface needling, without any binder ,increasing inter-weaving and tensile strength, so that ceramic fiber blanket own good stability under any working temperature.
Types of Ceramic Fiber Blanket for Heat Seals for Kiln Door: ordinary type, standard form, high-purity type, high-alumina type and containing zirconium type. Different types of products used different materials. Performance of Ceramic Fiber Blanket for Heat Seals for Kiln Door also has difference, and they are suitable for different working temperatures.
Main Characteristics of the Ceramic Fiber Blanket for Heat Seals for Kiln Door
◆Good springiness for fiber
◆Excellent strength and resistance to blowing
◆Excellent chemical stability
◆Low thermal conductivity
◆Low thermal shrinkage
◆Excellent sound absorption
Application of Ceramic Fiber Blanket for Heat Seals for Kiln Door
◆Petrochemical process heater refractory fiber lining
◆General furnace backup insulation
◆Electrical insulator
◆Heat seals for kiln car or furnace door
◆High temperature acoustic
◆Fire protection
◆Filling insulation and joint sealing
◆Back-up lining for industrial furnaces
◆Fireproof materials for construction
Ceramic Fiber Blanket for Heat Seals for Kiln Door Images
Ceramic Fiber Blanket for Heat Seals for Kiln Door Specification
Type | STD | HP | HA | HZ | |
Classification Temperature (°C) | 1260 | 1260 | 1350 | 1430 | |
Working Temperature (°C) | 1050 | 1100 | 1200 | 1350 | |
Color | Spotlessly white | spotlessly | spotlessly | spotlessly | |
white | white | white | |||
Density (kg/m3) | 64,96, | 64,96, | 64,96, | 64,96, | |
128,160 | 128,160 | 128,160 | 128,160 | ||
Shrinkage on heating (%) | ≤3 | ≤3 | ≤3.5 | ≤3.5 | |
(24 hours, density as 128/m3) | (1150°C) | (1250°C) | (1300°C) | (1350°C) | |
Thermal conductivity by different temperature (w/m.k) (density as 128kg/m3) | 0.15(800°C) | 0.176(800°C) | 0.18(1000°C) | 0.23(1000°C | |
0.17(1000°C) | 0.22(1000°C) | 0.26(1200°C) | 0.31(1200°C) | ||
Tensile strength (MPa) | 0.04 | 0.04 | 0.04 | 0.04 | |
(density as 128kg/m3) | |||||
Chemical | AL2O3 | 45-47 | 45-46 | 53-55 | 38-54 |
composition | AL2O3+SIO2 | 98.5 | 99 | 99 | 82-90 |
(%) | ZrO2 | - | - | - | 10-18 |
FAQ of Ceramic Fiber Blanket for Heat Seals for Kiln Door
Q1:Are you a manufacture or trader?
A:Factory+trade(mainly factories,at the same time,we operates other related products).
Q2:Can we visit your factory?
A:Sure,welcome at any time,seeing is believing.
Q3:What's the MOQ of trial order?
A:No limit,We can offer the best suggestions and solutions according to your condition.
Q4:Is your company accept customization?
A:We have own factory and excellent technical team,and we accept OEM service.
Q5:How about your company's certification?
A:ISO9001 and Test Report,also we could apply other necessary certification.
Q6:How to slove the quality problems?
A:If the products are not confirmed to customer samples or have quality problems,our compay will be responsible to make compensation for it.
Q7:Can you accept OEM for Ceramic Fiber Insulation Roll?
A:YES! We can according your demand to produce.
Q8:Can U accept the detective of the third-party verification company ?
A:YES! We can accept the detective from any third-party verification company including the SGS, BV and so on.
- Q: I've been wanting to crochet my swimsuit this year, but would like to avoid quot;saggingquot; in waterWould crocheting it with nylon yarn and lining it prevent this situation?
- Well, this is a great example of the problem with self-diagnosingIf you're having a BM every 1-2 days and your stool is soft, you are not constipatedFirst, ditch the fiber- it's undoubtedly contributing to your troublesSecond, I'd bet my 401K your diet is total crap (no pun intended.) Switch to fruits vegetables for several daysYou need see your doctor asap for diagnostic testsI'd suspect some kind of inflammatory bowel condition, definitely not an obstructionBut listing various possibilities would only make you paranoid, so make the appointment.
- Q: I am looking to buy a home here in Dayton, OH that is about 3000 sqftbut has high gas and electric heating and cooling billsIt has a Trane Furnace and air system, but I don't know how old the unit is yetMy question is: How much of a savings have you noticed by changing from a less efficient gas furnace to one of the newer high or ultra high efficient models.Thanks, Steve / OHIO
- I would ignore that previous statement.some companies are better than others.in how its built, options and pricing I have an Injen IS intake.its short ram but the amazing thing about that company is when Im able I can buy the cold air extension and throw it through the bumperWhen I bought it i couldnt afford a full CAI and I wanted to do some other engine work first.Im so glad I went with the option that offered the extensionIt was cheap too!
- Q: how do u straighten ur hair?
- There are a bunch of different ways to straighten hairTemporarily you can use a blow dryer to dry it straightOr you can buy a ceramic flat iron to make it straightThis seems to be most effective, especially after blow drying hairThere are tons and tons of hair products on the market that will help temporarily straighten hair, just look at your local drug store or beauty supply house to check them out If you want permanently straight hair you'll have to go to a hairdresserYou can get thermal reconditioning, aka japanese straighteningThis is a permanent method that lasts about 6-8 months before needing a touch upThere are also other chemicals that straighten hair, just ask your hairdresser.
- Q: what benefits does it have? and what exactly does it do?i just built a sub box and someone suggested putting the insulation inside the box.
- Pollyfil is a sound absorption, dampening fiber that will deepen bass, provide cleaner midrange, tone down any unwanted reverberation and improve the dynamic extension of any speaker system It also helps eliminate standing waves, which is something like an echo inside the boxThis will give you tighter and more accurate bassIt also helps to give a flatter frequency response to the overall sound, which is goodBesides this, it also helps reduce the vibration of the box, which results in less distortionThere is a big difference to the bass when you have an insulated box Damping also increases subwoofer efficiency by dissipating some energy that affects the sub, particularly the voice coilIt is advisable to put damping material inside a boxPillow polyfill and fiberglass insulation are common, though polyfill is a lot easier on your skinPolyfill also tricks a sub into thinking it is in a bigger boxMost sealed and vented enclosures require 1/2 lbof dampening material per cubic foot of internal enclosure spaceFor best results it is recommended to loosely fill the material throughout the enclosure.
- Q: autocirc pump under one of the sinksa good idea? no room anywhere else for water heater and all pipes and water heater are insulated.
- The best solution is to build a room around the heater if possible Insulate the walls and roofMake sure that there is at least a 4 inch air space between the insulation and the underside of the roofThis is requires for attic ventilationBe sure to have a doorway large enough to remove the water heaterMake an opening in the floor to the room below and install a floor vent in the water room and a ceiling vent in the room belowCheck local building regulations and codesGood Luck.
- Q: What’s the difference between heat preservation and heat insulation ceramic fiber blanket and rock wool blanket?
- The difference between heat preservation and heat insulation ceramic fiber blanket and rock wool blanket: refractory ceramic fiber material is a kind of lightweight and efficient heat preservation and heat insulation material. Its advantages are as follows: the volume and density of ceramic fiber as lining are low. Ceramic fiber lining is 75% lighter than lightweight insulating brick lining and 90%-95% lighter than lightweight castable lining. If fiber lining is adopted, steel structure load of furnace can be greatly reduced and the service life of the furnace can be prolonged. Heat capacity (heat storage) of ceramic fiber as lining is low: Heat capacity of ceramic fiber is about 1/10 that of lightweight and heat resistant lining and lightweight castable lining. Heat capacity of furnace lining material is proportional to the weight of the furnace lining. Low thermal capacity means that furnace absorbs less heat in the reciprocating operation and, at the same time, the speed of warming gets faster, which greatly reduces the energy consumption of the furnace temperature operation and control and especially plays a very significant role in energy saving effect in the starting-up and blowing-out of heating furnace. Thermal conductivity of ceramic fiber as lining is low: When the average temperature is 400℃, 600℃ and 1000℃, thermal conductivity coefficient of ceramic fiber as lining is less than 0.1w/mk, 0.15w/mk and 0.25w/mk respectively, which is 1/8 that of lightweight fireclay brick and 1/10 that of lightweight and heat resistant lining. Ceramic fiber as lining has prominent insulation performance. Ceramic fiber as lining is easy to construct: Expansion gap is not needed during the construction process. Construction personnel can start to work after basic training and construction technology has little effect on the heat insulation effect of lining.
- Q: what kinds of foods are in potassium and fiber?what does fiber do actually because teacher last year said it was hard to get and extremly important.
- prunes and figs are high in fibre and pottassiumIt's very important to eat high fibre foods because they wash out all the waste from your body, thus enabling weight loss and also, the toxins get flushed out of your systemFibre also keeps you feeling full.
- Q: I crocheted the felted messenger bag from the Crochet Me book for my momExcept I didn't pay attention to the gauge and I also switched between different needlesThe actual body of the bag is really long, which I guess is not that badBut the strap is extremely long alsoAnd when my mom tried on the bag, it reached past her kneesSo I need help fixing thisBut I don't want to undo the entire thingWould anyone know how I can fix it?Thanks very much.
- Honey, you can't felt acrylic yarnI'm really sorry to have to tell you thatA pattern for a felted item is going to produce an extremely large itemYou then put it through a felting process to shrink it to the size you want it to beIn the felting process, the item not only shrinks, the fibers entwine with each other to produce a thick fabric that has specific qualities (one of which is that the fabric can be cut without raveling) that make it both beautiful and wear-resistant Only wool or other animal-based yarn will feltFelting requires that the item be agitated in hot water to start the fibers entertwining and the item shrinking But acrylic yarn does not act that wayIf you are going to use acrylic yarn, you need to select projects that are designed for acrylic yarn-or at least, projects that are designed not to require feltingThe best thing yoiu can do is chalk this project up to a learning experience (we've all had 'em, I assure you) and unravel the yarn to be used in another project.
- Q: I have a bunch of wool right off of the sheepIt is all dirty and I want to spin itI know how to do the spinning part, but what are the steps before that? I need to do this manually and with the least amount of money! Thanks!
- When it warms up pull out this fiberglass insulation.It is worthless when it gets moisture in it - worthlessPlus, termites, mice, and other rodents love to hide behind it and make nests in itPurchase some 4' x 8' x 2 sheets of dow blue styrofoamMeasure the spaces up against your rim board and cut a pcof this styrofoam to fit in each spaceCut it tight enough so it is held in place on its ownIt won't be affected by moisture and if and when you need an annual inspection for termite protection agreement, all they simply do is pull out the pcs and put them back after the inspectionTermite companies hate fiberglass insulation because they cannot inspect your rim joist without demolishing it prior to the inspectionI've replace damaged sill plates,floor joists,rim boards on many homes and I can tell you if fiberglass is in between the floor joists - the termites are always behind them or have been behind themYou can cut the styrofoam with a sawzall - then take drywall saw under the crawl space with you in case you need to shave a little off of a pcnow and then to get it to fit good.
Send your message to us
Ceramic Fiber Blanket for Kiln Door Heat Seals
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 9 roll
- Supply Capability:
- 50000 roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
