Aluminium Strip Ceiling Kuantan - Calcium Silicate Boards with Good Quality
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1X20'FCL m²
- Supply Capability:
- 3000 M2 Per Week m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications of Aluminum ceiling
1.Material: aluminium sheet
2.Size:600*600, 605*605, 100*100, 400*400, 500*500, 100*600, 150*150, 150*800
800*800, 300*300, 300*1200, 300*600, 600*1200
thickness from 0.45MM to 0.7MM
3.Colour: white,silver,any of the RAL colour,etc.
4.Edge:Lay in, Lay out and Clip in
Personality of Aluminum ceiling
1. tidy, clean and easy to clean and install
2.green and long time for qulity gurantee
Application of Aluminum ceiling
1.Fasle ceiling in Airport, Station, High-grade building
2.Washing room and kitchen etc.
Package of Aluminum Ceiling
1.Standard export package, film inside carton outside
2.16 or 20 pcs in one carton
Installation instruction of Aluminum Ceiling
1. for square board
A.Firstly lift up the light keel and keep them at the same height and level
B:Enter the trangle card into the trangle keel, then according to the definite distance, put the triangle hanger into the light keel.
C:After finishing the installment of keel, press the clip-in square ceiling tiles into the slot of triangle keel(remark: the direction of folder with small hole is to insert into the slot of triangle keel)
D:Folding the edge which has no hole to connect the plate one by one, using the angle gap to install the plate and press a little on the plate, then it wil achive a better effect.
2.for c shaped strip ceiling
A:installing the wall angle at the same height
B:Arranging the hanging pole in a row and using hanger to connect the hanging pole with the keel, adjusting the height and flatness to the suitable position.
C:Pressing the two parallel edges into the triangle keel slot and making sure they are vertical mutually, then installing the rest plates.
D:Pressing a little on the plate when connecting the plates one by one, it will attain more better effect.
E:After the installment finished, then tear off the protective film covered on the aluminum plate.
F:Wearing gloves when installing plates, if you remain finerprint or stains on the plates, please remove it off with the boiled wter and detergent, and then dry it.
3.for curtain ceiling
A:As the open ceiling, it is necessary to brush the internal of the ceiling into back.
B:Fixing the expansion bolts into the ceiling then hanging the hooks or main keel onto the bolts
C.Put the curtain ceiling into the gap of the keels.
Production Line
We have 4 production line, 20 containers per month.
Our product combine quality with best price, there is a big professional team after the product.we are your best choice, we are waiting for your call.
- Q:Nano-aluminum plate how much money a square meter
- Look at the brand, nano is just a business gimmick only, the brand is also out of advertising. There is no national standard in emerging industries.
- Q:How to distinguish between PVC plastic gussets and aluminum gussets?
- In the use of performance: PVC plastic buckle water, scrub resistance is very strong, compared to the lower cost. Aluminum gusset plate in the texture, decorative sense of the better First, PVC plastic gusset to PVC as raw material, light weight, easy to install, waterproof, anti-borers, the surface color pattern changes are also very much, and resistant to pollution, good cleaning, sound insulation, good heat insulation, especially the new The process by adding flame retardant materials, so that it can fire that is off, the use of more secure. The downside is compared with the metal plate. Life is relatively short. Second, the aluminum gusset plate compared with the traditional ceiling material, texture and decorative sense of the better As the thermal insulation properties of metal plate is poor, in order to obtain a certain sound absorption, adiabatic function, in the choice of metal plate ceiling decoration, you can use the addition of glass wool, rock wool and other insulation materials to achieve the effect of adiabatic sound absorption.
- Q:Bathroom ceiling with what material
- General ceiling ceiling ceiling is generally used aluminum plate, plastic buckle board, gypsum board.
- Q:Want to do aluminum ceiling production, do not know what sets of production equipment. What is the price of the equipment?
- Do aluminum ceiling production, only need a hydraulic molding machine, about 35,000
- Q:Magnet suction does not suck aluminum buckle plate?
- The magnet can attract a metal with a magnetic property. Iron, cobalt, nickel is a typical magnetic metal, so iron, cobalt, nickel can be attracted by the magnet; magnets can not attract non-magnetic metal and non-metallic, aluminum is non-magnetic metal, so aluminum and non-magnetic metal can not be Magnet attracted.
- Q:Aluminum buckle board and pvc which is good
- PVC gussets: PVC gusset plate is also we often see the plastic plate, PVC gusset plate light quality, waterproof, moisture, heat insulation, not easy to burn, no dust, easy to clean, but also suitable for kitchen, bathroom ceiling decoration. But compared to metal ceiling, PVC ceiling appears to be inferior. PVC buckle advantages: 1, PVC buckle ceiling pattern more varieties, to choose from the varieties are: milky white, beige, lake blue; patterns are: Epiphyllum, flat peach, Xiong Zhu, Yunlong, grid flowers, parquet and so on. 2, the material is light weight, easy to install, waterproof and moisture-proof, anti-borer, and resistant to pollution, good cleaning, sound insulation, good insulation performance, especially in the new process by adding flame retardant material, More secure. 3, PVC gusset material cost is low, so the cost of PVC gusset ceiling is very low, while the installation is also very simple. PVC gusset plate Disadvantages: 1, the general disadvantage of plastic material is the physical performance is not stable enough, so the key problem is that even if the PVC does not encounter water, a long time will be deformed. 2, aging fast, easy to change color, short life, generally 3-5 years looks long for a long time. 3, low environmental protection, waste PVC gusset plate is difficult to deal with, causing pollution to the environment, if with a strong irritating smell of PVC gussets, the body is harmful.
- Q:Can the aluminum plate be made of walls? How to build is better, how to install the ground
- Really can not do, aluminum ceilings too thin casually hit on a lack of wall, then you can paste wallpaper ah
- Q:What is the difference between a grid ceiling and an aluminum slab plate ceiling? Please all of you
- This is a grille ceiling, usually used in supermarkets or stores This is the aluminum slab ceiling, usually used in the kitchen and bathroom
- Q:Aluminum veneer, aluminum ceiling installation to pay attention to what the problem
- The aluminum board is connected to the keel by the surrounding aluminum horn and fixed to the keel with screws. In the installation is strictly prohibited distortion, deformation, bruises, from top to bottom layer of aluminum veneer surface of the protective adhesive tape to tear off, while layer by layer synchronization split, dismantling should pay attention to protect the aluminum veneer, Scratches; pay attention to the installation of precision control, vertical vertical plane 2mm; surface flatness 3mm; corners Founder 3mm; seam straight 0.5mm. The project in the installation process in strict accordance with the requirements of construction, and adhere to the process can not be carried out on the next process of construction quality control principles. In addition to taking into account the facade of the decorative effect, but also to consider the thermal expansion of the thermal expansion after the amount of seams must be sealed with a weathering rubber to prevent gas infiltration and rain leakage ① fully clean the board The gap to ensure that the adhesive surface clean, and to dry; ② to adjust the depth of the seam, to avoid the three sides of the glue, the seam filled with PVC foam material (small round bar); ③ glue should be applied Flat, remove the excess glue; ④ pay attention to post-mortar care, glue in the incomplete hardening before, do not contaminated with dust and scratches
- Q:Under the beam to install aluminum hanging plate ceiling, at least need to stay a few centimeters? (That is, the distance between the aluminum plate and the beam)
- Stay 6 cm on it. Because the aluminum slab board construction from the keel hanging down, there are 6 cm space to buckle down.
1. Manufacturer Overview |
|
---|---|
Location | GuangDong,China |
Year Established | 2002 |
Annual Output Value | Above US$9 Million |
Main Markets | South America Metal Ceiling, T Grid, Spring Tee, Ceiling Accessories 8.82 Eastern Europe Metal Ceiling, Ceiling Accessories 24.26 Africa Metal Ceiling, T Grid, Spring Tee, Ceiling Accessories 11.03 Mid East Metal Ceiling, T Grid, Spring Tee, Ceiling Accessories 45.75 Eastern Asia Metal Ceiling, Ceiling Accessories 10 |
Company Certifications | CE CERTIFICATE |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | Foshan |
Export Percentage | 80% - 90% |
No.of Employees in Trade Department | 11-20 People |
Language Spoken: | English;Chinese; |
b)Factory Information | |
Factory Size: | 10,000-30,000 square meters |
No. of Production Lines | 7 LINES |
Contract Manufacturing | OEM Service Offered;Design Service Offered |
Product Price Range | Average |
Send your message to us
Aluminium Strip Ceiling Kuantan - Calcium Silicate Boards with Good Quality
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1X20'FCL m²
- Supply Capability:
- 3000 M2 Per Week m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords