Color Coated Aluminum Coil AA1035 Aluminum Alloy
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2 m.t.
- Supply Capability:
- 60000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
Color Coated Aluminum Coil AA1035 Aluminum Alloy
1.Description
Alloy | AA1100, 3003, 3004, 3105, 5006, 5052, 8011, etc , etc. |
Temper | H16, H18, H24, H26, H28 |
Thickness | From 0.1mm to 1.2mm |
Width | Standard width:1240mm, 1270MM |
Special width:1000mm, 1200mm, 1240mm, 1270mm, 1520mm, 1620mm | |
Diameter | Standard dia:1200mm |
Interior dia: 150mm,405mm, 500mm, 505mm, 510mm | |
outer diameter: 1200mm | |
Weight | 2.5 T/coil,3.0 T/coil |
Coating thickness | PE:>=16 micron , PVDF:>=25 micron |
Protective film | As per customer’s request |
Coating paint | PVDF, PE(Polyester), epoxy, polyamide, polyurethane |
Color | Soid, metallic, high gloss,stone,timber,brush,mirror,sparkling, RAL or by customer requirements. |
Weight | As per customer’s request |
Surface | Embossed, mill finish, coated |
Gloss | 10-100% |
Coating Hardness (pencil resistance) | More than 2h |
Coating adhesion | 1J |
Impact Resistance | No peeling or cracking(50 kg/cm) |
Application | ACP,wall cladding,facades,roofs and canopies,ceilings,signboards,blind window,display platforms,electrical panels,etc |
Coating Thickness | PE coating:more than 16 micron |
PVDF coating:more than 25micron |
2. FAQ
Q: Can you provide free samples?
A: Yes, free samples will be sent to you on freight at destination.
Q: Can I get your latest catalogue?
A: Yes, it will be sent to you in no time.
Q: What is the MOQ?
A: 5 tons
Q: What are your payment terms?
A: We accept L/C, D/A, D/P, T/T, West Union, etc
- Q: There are long and rectangular, and square, they are what size?
- 30cmx30cm is a square 30cmx60cm is a rectangular and 30cmx48.4cm known as the golden section 30cmx45cm there are also decorated with 10cmx30cm 20cmx30cm do the project will use 60x60cm 30x60cm I was integrated ceiling manufacturers
- Q: Aluminum buckle plate aluminum plate wholesale price is how much
- Home and the use of aluminum slab plate thickness is generally 0.6mm and 0.8mm. Because the thickness of the aluminum plate is the best cost-effective, fully able to meet the load strength. If the thickness of thickening, not only a waste of resources, but also increased the consumer's unnecessary economic burden. And even some good brand, due to the use of aluminum material is very good, the thickness of only 0.45mm. Therefore, consumers in the purchase of aluminum plate, can not just judge the quality of sheet metal plate, the need for consumers is clear that the plate material is to determine the quality of aluminum standard plate, good aluminum toughness and strength appropriate, Recycled aluminum is often hard, but tough but poor.
- Q: Who has CAD - 600 * 600 mineral wool board ceiling 300 * 300 aluminum slab plate ceiling node map urgent use
- Aluminum slabs are usually used in home improvement market.
- Q: Can the aluminum slabs be fitted with air fans?
- Of course, there is a matching integrated exhaust fan.
- Q: Yuba size of the general size of the size, and how to install the aluminum buckle hanging on the top of the
- Suitable for aluminum hanging plate hanging 30X30, there are 30X60, most directly on the keel can be, and some also with a screw, tightening can be reinforced.
- Q: Aluminum buckle plate can be installed into a ceiling of Yuba it
- A 30cm * 30cm aluminum plate, 1.2mm thick, good quality of our price of a 5.5 yuan or so. Plus accessories (I use the Oplone, good quality) a flat about 90 blocks
- Q: Aluminum buckle ceiling ceiling how to do
- This depends on the type of ceiling board to choose the appropriate solution. Specifically, it is divided into the following two cases: 1, the ceiling of the board for the square board (the general specifications in the 30 cm or so square), first remove the ceiling next to a square plate, using a wallpaper knife blade into the ceiling lamp and the surrounding square between the gap of a certain size And then the blade will pry the square around the ceiling lamp and then take the board from the side of the side where the board has just been leveraged. After the ceiling of the connection to the wire to be replaced after the replacement of ceiling lights. To be finished after the lamp, and then re-install the square board can be removed just. 2, the ceiling of the board for the board (that is, long strip), to remove the ceiling lamp, you need to ceiling lights on both sides of the strip on both sides of the buckle first removed, and then take the board and change the lights.
- Q: Aluminum buckle ceiling ceiling area is how to count
- Calculate the total area: the total length of the installation area multiplied by the total width is the area, all units in meters, the result is square meters. If it is not regular, it is necessary to divide into multiple rectangles to calculate the area, and finally add the total area.
- Q: Such as the problem, the wet bathroom will be selected because of the aluminum buckle material and the formation of a layer of water droplets, Is not it should choose the sauna board and other wood materials please answer the other experts and the kitchen and before and after the balcony if you choose the aluminum plate should choose what form, Foil
- The design of the kitchen and the restaurant together is a European practice, open kitchen gives the feeling of the atmosphere. At this point, of course, can not use the above materials to do ceiling, ceiling materials and living room is basically the same, is the use of gypsum board ceiling more. It is noteworthy that, because China and Western eating habits and diet cooking methods are not the same, open kitchen is not appropriate - because of fumes, fried food oil and gas can not be completely discharged by the hood. So, the proposal is, not a last resort, do not use such a program.
- Q: 0.6 mm aluminum buckle plate is multiple
- Equal to 12.2 kg weight of a board.
Send your message to us
Color Coated Aluminum Coil AA1035 Aluminum Alloy
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2 m.t.
- Supply Capability:
- 60000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords