Burners of this type are mainly used to provide heat for Catalyzed Unit Startup of Auxiliary Combustion Chamber, which can be stopped using after startup. As fuel, diesel oil and fuel gas can be used singly or combinedly. The positive pressure at Combustor shall be ~0.1MPa-0.2MPa. Burners shall have the function of auto ignition and be equipped with double-flame monitor. Most Burners are required of operation flexibility stability and reliability because temperature variation and constant temperature gradient will be appeared during the period of lining drying for startup.
Ammonia Incinerator Burners are often used to burn acid gas and off gas contained ammonia, the flue gas after burning mixed with air will be discharged directly. The temperature of the Burners shall be usually about 1300℃ in order to remove NH3 in acid gas effectively, and required temperature shall be kept by adding compensation of fuel gas.
GROUP mainly produces the following products:
l Refinery/chemical furnaces, incinerators, coal (liquid) chemical reformers
l Waste heat boilers, thermal medium boilers
l Class A1 /A2 pressure vessels
l Reactors, Heat Exchangers & Towers
l Oil tanks/accessories/mixers, alloy steel precision castings
l Four classes of piping supports and hangers used in fired-electric/thermo-electric/nuclear electric power industries and dampers
l Flue gas/air/coal powder duct and its attachments
l Boiler ancillaries, water treatment devices and so on
GROUP obtains the following certificates:
l Class A Certificate of Engineering Design
l Design License of Pressure Vessel (Class A3)
l Manufacture License of Pressure Vessel (Class A3)
l Design & Manufacture License of Pressure Piping (Class A)
l Manufacture License of Waste heat boilers (Class A), thermal medium boilers
l ISO 9001:2000 Quality Management System
l ASME U and ASME S
l Enterprise Credit: AAA
