Product Description:

Mono Silicon Solar Panel(85W—100W)

Introduction of Mono Silicon Solar Panel(85W-100W)

Solar photovoltaic (PV) Panel is designed for large electrical power requirements.

It is the optimal choice for both on-grid and off-grid power systems. CNBM Solar panel offers high performance of power per square foot of solar array. Monocrystalline silicon(c-Si): often made using the Czochralski process. Single-crystal wafer cells tend to be expensive, and because they are cut from cylindrical ingots, do not completely cover a square solar cell module without a substantial waste of refined silicon. Hence most c-Si panels have uncovered gaps at the four corners of the cells.

Characteristics of Mono Silicon Solar Panel

I Solar Cell : High efficiency crystalline solar cell. Even if under the weak light, the solar module can produce maximum power output.

II Tempered glass (toughened glass): Anti-reflecting coating and high transmission rate glass increase the power output and mechanical strength of solar module.

III EVA and TPT: Using high quality EVA and TPT to prevent destroying and water

IV AI frame: Without screw, corner connection. 6 holes on the frame can be installed easily.

V Junction box: Multi function junction box with water proof.

VI Long lifetime: ≥25 years; Less power decrease.

VII Good performance of preventing from atrocious weather such as wind and hails.

VIII Resisting moisture and etching effectively, not effected by geology.

Standard Test Conditions of Mono Silicon Solar Panel

The opto-electrical specifications shown below are stabilized values being measured at Standard Test Conditions, Irradiance: 1000W/m2, Spectrum: AM1.5 at 25°C, The info below is subject to manufacturing tolerances. Where appropriate minutes of measurement are available and are used for the dimensioning of the installation.

Advantages of Mono Silicon Solar Panel

• CNBM Solar performance guarantees for 25 years

• 2 years guarantee for workmanship

• Timeliness of delivery

CNBM International Corporation's products including Monocrystalline Solar Panel, Polycrystalline Solar Panel have received and enjoyed famous reputation in many countries and regions in the world .As a solar panel supplier in China, we strive to provide our customers with excellent service, superior products and unmatched value.

High efficiency mono crystalline solar panel PLM-300M-72 series

• Anti-reflective coating: AR used reduce the reflectivity enhance transmittance.

• Tempered Glass: Low Iron and AR coating glass increase the power output and mechanical strength of solar module. Mechanical load ≥2400Pa , transmittance ≥91.6%

• EVA: Transmittance ≥91% , Adhesive Capacity >85%

• Cell: 17.9% of high efficiency solar cells to sure 15.7% module efficiency

• Back sheet: Using higher quality back sheet to prevent destroying and water , it’s reflectivity ≥87%, peeling strength ≥ 40N/cm.

• Aluminum Frame: Anodized aluminum alloy to effectively improve the corrosion resistance and strength

• Certification:

  
  

  

  
  

  
  

  STC:Irradiance 1000W/m², Temperature 25°c,AM=1.5Maxium system voltage     1000VDC

Product Warranty:

10 years for the workmanship
12 years power output no less than 90%
25 years power output no less than 80%