air diffusers ceiling use for HVAC systerm
- Loading Port:
- Ningbo
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 999999 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification of Air Diffuser
Supplying Air Diffusers
-Frame Thickness: 1.0mm /0.8mm
-Any Size be customed
-Powder Coated RAL 9010/9016
Usage of Air Diffuser
The grille is suitable for ceilling sidewall, soffit or cill mounting and may be used for supply or extract applications.
Typical installations include offices, shops, hotels and most commercial or industrial buildings.
Available as standard in white polyester powder coat finish.
Other polyester powder coat finishes are also available as an option.
FAQ of Air Diffuser:
1, What's size do u have for round type diffuser?
A: We have face size from 150mm to 550mm,neck size from 250mm to 400mm聽
2, Do u still have other types ?
A: Yes, we have round diffuser/ rectangle diffuser/ linear grilles/ baseboard diffusers,etc
3, What's the most early delivery time?
A: Within 25 days for each 40'fcl
- Q:What is the warm working principle of what is warm
- To warm the floor is the radiator, through the floor of the radiation layer of the heat medium, the uniform heating of the entire ground, the use of the ground itself, the heat and heat up the law of radiation from the bottom to the conduction, to achieve the purpose of heating. From the heat medium is divided into water to warm and warm air to warm the dry Gan Nao imitation wet wet splash two categories, water heating is the water heated to a certain temperature, transported to the floor under the water pipe cooling network, through the floor fever To achieve the purpose of heating a heating method. Electric heating is the use of electricity to convert heat, it is recommended to use water to warm, more environmentally friendly and healthy energy! best regard!
- Q:What is the air source heat pump to warm air conditioning two for the system
- 1 air energy (source) heat pump is driven by the motor, the use of steam compression refrigeration cycle principle, the ambient air for the cold (hot) source of cold (hot) wind or cold (hot) water equipment, the main components include Hot side of the equipment, heat source side of the heat transfer equipment and compressors. 2 air energy (heat source) heat pump using the heat in the air as a low-temperature heat source, through the traditional air conditioner in the condenser or evaporator for heat exchange, and then through the circulatory system, extraction or release of heat, the use of unit circulation system to transfer energy to the building Objects, to meet the user's life hot water, floor heating or air conditioning and other needs. 3 current multi-function heat pump is generally called triple supply, refrigeration, heating, hot water three functions of the unit. Cooling mode can get free living hot water, energy efficiency is very high, heating mode can do floor heating, radiator, hot water and so on. If it is two for the system, then one of them may not be provided.
- Q:Electricity to warm and water to warm contrast
- Before the water is warm, it is electric to warm. The first is because the gas costs continue to rise, and electricity began to appear electricity peak and trough, the second is because the water can not be closed after the warm, can not be laid single room, and now warm home warm, warm floor, According to the time, the district of different ways of the switch, power consumption is also low, so what is better and worse than the factory to determine Yao Deng witnessed super cunning, landlord should understand....
- Q:I see the panel has a "cycle of digital time relay", the United States called microcomputer controller, as well as seismic pressure gauge, the rest is the switch indicator light, and there is no knowledge of what (estimated that there are two A solenoid valve a tube of water a gas), this thing on the market to sell more than 2000, I feel the cost of 200 to 300 yuan (guess, because I do not know where the burden of the child to pay the nuclear shop is too much money). Hope to tell the internal structure, which there are any components, I would like to do one, have a better picture, as well as cleaning, "time relay" set parameters (water and ventilation time), hope you greatly educated, brother Thank you The More
- Practice has proved that the method of pulse geothermal cleaning is far from the effect of good projectile, the so-called pulse is a pulse device, the name is the water to form a spiral to play out, and then rotate in the pipeline flow to the flushing pipe wall The role of the general situation are part of the water block part of the blockage is serious, the mouth can not get into the water how will rotate in the wall? I have been engaged in geothermal cleaning has five or six years, the pulse of the basic method is a hammer , The effect is very poor, and always call me this is not hot, obviously not hot, so less than a last resort I will not use the pulse, and only those who can not be demolished, or with the projectile. Since you have been demolished on a demolition in the end chanting, that thing is very simple, the cost of the burden of the child from the nuclear shop as you said it is one or two hundred dollars, only two solenoid valves, and a control of the intensity Small board, purely bluffing stuff
- Q:Can electric heating boilers and coal-fired boilers be able to share together?
- As if not, have not seen these two strings with the use
- Q:Seeking the whole process of the head test pressure, text description, detailed point,
- 1. Test pressure single test pressure and system test pressure, single test pressure: pipe laying or hidden parts of the pipeline after the completion of installation and design requirements according to the requirements of water pressure test. System test pressure: heating system installed according to the design and specification requirements for system water pressure test. 2. Heating, air conditioning system test procedures: a first check the entire system of all control valves are open, the system should be separated from the outer pipe network, open the gas tank release valve. B will be the water supply pipe, test pressure pump and other temporary pressure test pipe connected to the main water supply pipe, and irrigation to the system until the system filled with water and the pipeline system after the air drained (put the wind gate workers The valve out of the water so far), close the release valve; c operation test pump to boost, boost the process should pay attention to check the management, fittings and accessories are leaked, such as leakage should stop the pressure, and after the buck Repair, change pad, tighten and so on. D system without leakage, the pressure and boost to the test pressure, stop the pump check, and observe the pressure gauge, requiring 10 minutes pressure drop of not more than 0.02Mpa, that is qualified.
- Q:What is the service life of the air source heat pump water heating system?
- Air source heat pump water to warm the general service life of up to 50 years or so, but if in daily life without reasonable use, will certainly cause water to warm the service life is shortened, so we use water to warm when appropriate to use, and do not forget The water to warm the corresponding maintenance. Carry out the necessary periodic inspection of water to warm the system mainly by the insulation facilities, sub-catchment, geothermal system, pipeline valves, backfill concrete composition. Among them, the sub-catchment has shunt, collecting, constant pressure, exhaust and so on. Therefore, the sub-catchment installed directly affects the quality of the project and the quality of heating. Scale, material, installation and other factors will affect the role of the water separator, if the above factors are not well resolved, there will be leakage, the pipeline longitudinal cracking, valve off and so on. These phenomena often appear in the upper and lower bar of the water divider interface, the angle valve and the main bar connection, the angle valve handle, and the exhaust valve at the top and the root. This phenomenon will generally occur in the water to warm the system used a year or two later. Therefore, the water to warm the system in the use of a year or two later, the user in their daily lives should pay attention to regularly check their own water to warm the system to prevent such phenomena in time to produce. Check the method can follow the "one look, two screw, three pull" principle
- Q:What is the basic task of heating engineering? The heating system is composed of some parts
- The basic task of heating engineering is to meet the needs of the heat load components: heat, heat, hot users
- Q:Public bath with water heating
- The cost is too high to operate.
- Q:Air source heat pump how much money
- Different regions of the different vendors may have differences in the price, you can compare a few more, it is recommended to the regular store or large chain stores to understand.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
air diffusers ceiling use for HVAC systerm
- Loading Port:
- Ningbo
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 999999 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords