Wire Spiral Hydraulic Hose SAE R13
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Applications: It is a high temperature medium pressure hose suitable for petroleum base hydraulic oil in severe conditions, with temperature range from -40°C to 121°C (-40°F~+250°F).
Features: The hose is constituted of one internal oilproof and heatproof synthetic rubber layer, multiply wire braided layer and one external weatherproof synthetic rubber layer, complying with SAE100R13 and GB/T10544-2003.
Nominal Diameter ? | Inside Diameter? | Reinforcement Diameter? | Outside Diameter? | Working Pressure | Proof Pressure | Burst Pressure | Bend Radius | Weight | ||
inch | dash | mm | mm | mm | bar | psi | bar | bar | mm | kgs/m |
3/4 | -12 | 18.6~19.8 | 29.2~29.8 | 32.0~32.8 | 350 | 5000 | 830 | 1380 | 240 | 1.65 |
1 | -16 | 25.0~26.4 | 35.5~36.1 | 38.3~39.1 | 350 | 5000 | 830 | 1380 | 300 | 2.25 |
1 1/4 | -20 | 31.4~33.0 | 47.1~47.7 | 49.9~50.7 | 350 | 5000 | 830 | 1380 | 420 | 3.6 |
1 1/2 | -24 | 37.7~39.3 | 54.7~55.3 | 57.5~58.3 | 350 | 5000 | 830 | 1380 | 500 | 4.75 |
2 | -32 | 50.4~52.0 | 67.7~68.3 | 71.5~72.3 | 350 | 5000 | 830 | 1380 | 630 | 6.9 |
- Q: Hydraulic hose joint dimensions
- Metric plain thread1. metric screw thread with a capital M, tooth type angle 2 degrees =60 (alpha tooth type half angle);2. metric ordinary thread by pitch, coarse teeth, ordinary thread and fine teeth, two kinds of ordinary thread;2.1. coarse tooth ordinary thread mark generally does not indicate the pitch, such as M20 means coarse thread; fine tooth thread mark must indicate the pitch, such as M30 * 1.5 for fine tooth thread, in which pitch is 1.5.2.2. common thread is used for the connection and fastening between the mechanical parts, and the general thread connection is mainly made of coarse thread. The thread strength of the fine tooth thread is slightly higher than that of the same nominal diameter, and the self-locking performance is better.Mark 3. metric screw thread: M20-6H, M20 * 1.5LH-6g-40, where M represents a common thread metric, 20 nominal diameter thread is 20mm, 1.5 pitch, LH said, 6G 6H left, said thread precision grade, precision grade of internal thread uppercase, lowercase precision grade of said external thread, 40 screwing length.
- Q: What is the function between the rubber pipe joint and the installing pipe?
- The inner seamless seamless rubber joint prevents the corrosive medium from eroding the inner wall of the rubber joint and improves the service life in the high temperature resistant, acid resistant and oil resistant pipes.
- Q: How to prevent leakage of rubber joint check valve?
- Because of its unique material and structure, even if it is blocked by solid material, it is still closed. As a result of his reverse sealing, no leakage, prevent backflow, the greater the back pressure, the better the effect.
- Q: How long is the service life of the gas hose?
- The service life of the hose is two years. It is recommended to change it once a year,
- Q: How can I keep the rubber tube for stethoscope?
- First of all, why would the stethoscope sound by the hollow box head, the heart beat (vibration) into the vibration of the hollow box leaves, (also caused by internal air vibration), thus forming the sound of the heart.
- Q: Diameter 127mm steel pipe, and diameter 127mm rubber hose how to connect?
- According to GB1187, the rubber tube with an inner diameter of 127 has the maximum working pressure of 0.7MPa. The internal diameter tolerance is 2, and the outer diameter of the steel pipe is 127. If the purchase is appropriate, it should be sheathed, but the pipe factory is always taking negative tolerances.
- Q: The principle of the common bicycle valve
- An elastic thin edge hose is placed below to form the whole of the core. In fact, it is a one-way valve. When inflating the bicycle tyre, the compressed air in the air pump enters the valve core from the hollow part, and the elastic rubber tube is top, and the air enters the tyre.
- Q: How to detect the reliability of rubber hose
- Hose size measurement: the inner and outer diameter, outer diameter, wall thickness, enhancement layer concentricity, inner and outer layer of glue thickness, assembly diameter, new GB and ISO increased the length and the measuring point mark, provides no pipe joint and a hose length of various pipe joint measurement method.
- Q: How to distinguish the true and false corrosion resistant rubber soft joint?
- Put the rubber joint in the corrosive liquid which needs to pass. One day, 24h can see that the swelling ratio is not more than 5%!
- Q: How about rubber transfusion hose?
- In accordance with the mixer developed within the layer, the middle layer and the outer winding hose layer; while using extrusion equipment will soft core inner tubing extrusion and coated release agent in coating or hard core, but should pay attention to the use of liquid nitrogen freezing method can not die.
Send your message to us
Wire Spiral Hydraulic Hose SAE R13
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords