Wire Spiral Hydraulic Hose SAE R12
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Applications: It is a high temperature medium pressure hose suitable for petroleum base hydraulic oil in severe conditions, with temperature range from -40°C to 121°C (-40°F~+250°F).
Features: The hose is constituted of one internal oilproof and heatproof synthetic rubber layer, four wire braided layers and one external oilproof and weatherproof synthetic rubber layer, complying with SAE100R12 and GB/T10544-2003.
Nominal Diameter ? | Inside Diameter? | Reinforcement Diameter? | Outside Diameter? | Working Pressure | Proof Pressure | Burst Pressure | Bend Radius | Weight | ||
inch | dash | mm | mm | mm | bar | psi | bar | bar | mm | kgs/m |
3/8 | -6 | 9.3~10.1 | 17.3~17.9 | 19.9~20.7 | 280 | 4060 | 560 | 1120 | 125 | 0.7 |
1/2 | -8 | 12.3~13.5 | 20.8~21.4 | 23.4~24.2 | 280 | 4060 | 560 | 1120 | 180 | 0.84 |
5/8 | -10 | 15.5~16.7 | 24.5~25.1 | 27.1~27.9 | 280 | 4060 | 560 | 1120 | 200 | 1.1 |
3/4 | -12 | 18.6~19.8 | 27.8~28.4 | 30.4~31.2 | 280 | 4060 | 560 | 1120 | 240 | 1.33 |
1 | -16 | 25.0~26.4 | 35.1~35.7 | 38.3~39.1 | 280 | 4060 | 560 | 1120 | 300 | 1.85 |
1 1/4 | -20 | 31.4~33.0 | 44.1~44.7 | 47.3~48.1 | 210 | 3045 | 420 | 840 | 420 | 2.65 |
1 1/2 | -24 | 37.7~39.3 | 50.1~50.7 | 53.5~54.3 | 175 | 2540 | 350 | 700 | 500 | 3.2 |
2 | -32 | 50.4~52.0 | 62.7~63.3 | 66.9~67.7 | 175 | 2540 | 350 | 700 | 630 | 4.5 |
- Q: The rubber tube of the gas cooker is aging. It's leaking. Can you change it for yourself?
- You see what your gas range is, it is best to go with a metal hose, the province later by the mouse bite. My father is quite understand, our family's Hengtong metal hose was changed just the year before last, it's really much better
- Q: Can the spring hose joint be connected to the tap?
- Two treatment1 if Water Leakage can choose to replace the elbow elbow, the best selection of true Shide profiles or fittings2 if the ground is Water Leakage, nine in ten was a cause of the pipe in the ground before the hot melt glue of the elbow. Then have to ask the property or a professional plumber to weld.
- Q: What happened to the soft rubber flat?
- The two above are all correct, this is mainly to see where you are used, and if used in the settlement of the joint or expansion of the above, and then appear flat, then it is easy to burst the tube. It is important to note that metal bonding is recommended. Rubber joint is commonly used to shock, is not recommended when the expansion joints, expansion joints when used, if appear flat phenomenon, prone to pull off the situation (is flange off). The danger of exploding pipes everywhere. So it's not that rubber joints are bad, and it depends on where they are used.
- Q: The basic buret is a rubber tube is inlaid with a glass bead to replace glass piston. Why this burets cannot be used to install Potassium Permanganate solution?
- It can not be installed, but it does not conform to the standard of chemical experiment operation. Strong oxidizer will damage rubber tube. That's why it's not recommended. Acid burette operating standards have placed solution requirements.
- Q: Can the rubber hose for the LPG cooker and gas cooker be general?
- However, attention should be paid to the isolation of fire sources during storage and transportation, avoiding the exposure of sharp instruments and more corrosive chemicals, and avoiding prolonged storage in daylight.
- Q: What are the properties of an oil resistant rubber hose?
- The performance of the extended product is accompanied by a rubber hose in life in many areas already occupy a crucial position, which makes the hose detection is important, especially for the rubber pipe detecting water, oil and gas and other purposes.
- Q: How do the automobile rubber hoses combine with the quick couplings?
- The blue fast joint with fluorine is corresponding to the pressure, and the red fast joint with fluorine is corresponding to the high voltage
- Q: Carbon dioxide gas shielded welding torch wire feed hose joint, that steel wire can not be drawn out, how to solve it, with welding?
- Replaceable welding wire feeding tube wire feeding tube can be directly removed, if not directly pull out, it may be the welding current and wire melting welding in together, there may be a wire feeding tube after the corrosion resistance increases to pull out, encountered such a situation like a gun only;
- Q: Must the hose for the cooker be made of oil resistant rubber hoses?
- When the gas combustion equipment and gas pipeline for hose connection, the design should meet the following requirements: (1) the burner of household gas stove and laboratory use, the connecting hose length should not exceed 2m, have no interface; (2) industrial production with mobile gas burning equipment, the connecting hose the length should not exceed 30m, the interface should not exceed 2;...
- Q: What with the appropriate suction tube Dichotomanthes tube and rubber machine
- The bellows are extruded by the extruder, and the winding tubes are wound in circles
Send your message to us
Wire Spiral Hydraulic Hose SAE R12
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
