Solar Pure Sine Wave Power Inverter 212V/24/48VDC to 110V/230VAC 1500W
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 10 unit
- Supply Capability:
- 500 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1. Structure of Solar Pure Sine Wave Power Inverter 212V/24/48VDC to 110V/230VAC 1500W Description
It is a photovoltaic (PV) system interacting with the utility, with or without batteries, that uses a relatively new breed of inverters that can
actually sell any excess power produced by your solar array back to the utility grid. If you are concerned at all about your utility rates going up
and would like to do something to reduce your monthly electric bill, then a grid-tie solar system may be just the thing for you. These systems
are easy to install and since some do not have batteries for back-up, the lack of batteries in these systems means no messy maintenance or
replacements to worry about. The solar modules can be mounted on your roof or out in the yard, where they sit quietly generating power from
the sun that you can either use directly or sell back to the utility company.
2. Main Features of Solar Pure Sine Wave Power Inverter 12V/24/48VDC to 110V/230VAC 1500W
•.Power ON-OFF switch
•.High surge power up to 3000W
•.Output voltage regulation : ±10%
•.Output waveform : Pure sine wave
•.Cooling fan ON-OFF control
•.Protections : Bat.Low alarm/Bat.Low shutdown/over voltage/over tem./output short/Input polarity reverse/Over load
•.CE LVD
•.2 years' warranty
3. Solar Pure Sine Wave Power Inverter 12V/24/48VDC to 110V/230VAC 1500W Images
4. Solar Pure Sine Wave Power Inverter 12V/24/48VDC to 110V/230VAC 1500W Specification
Model | DS-1500P | |
Output Waveform | Pure Sine Wave | |
Continuous Power | 1500W | |
Peak Power | 3000W | |
Input Voltage | 12V/24V | |
Voltage Range | 10.5-15VDC/21-30VDC/42-60VDC | |
Output Voltage | 110V/120V/220V/230V/240V AC | |
Frequency | 50Hz/60Hz | |
Fuse | 35A*8/12V , 20A*8/24V , 10A*8/48V | |
Low Alarm | 10.5±0.5V / 20±1V / 40±1V | |
Over Voltage | 15±0.5V / 30±1V /60±1V | |
No Load Current Draws | <0.3A | |
Cooling fan | Temperature and load controlled | |
USB | 5V,500mA | |
Fuse | External | |
Dimensions | 290*220*90mm 5.3±0.2KGS | |
Packing | 435*370*370mm 11KGS/2PCS/Carton | |
Protection Function | Low voltage alarm | |
Low voltage shut down | ||
Over input voltage | ||
Over temperature | ||
Over load | ||
Short circuit protection, Reverse Polarity (Fuse) | ||
LED Indicator Light | Inverter, Fault | |
Application | Automobiles, RVs, Boats, tractors, trucks,Laptops, TV sets, Video Games, CD Players, DVD Players, Power tool, Office Equipment, Major Household Appliances, etc. | |
Environment | Operating temperature: -10°C~+50°C | |
Operating relative humidity: 20%~90%RH non-condensing | ||
Storage temperature: -30°C~+70°C | ||
Cooling Fan automatically run: inner temperature rising up is:≥45°C |
5. FAQ of Solar Pure Sine Wave Power Inverter 12V/24/48VDC to 110V/230VAC 1500W
Q1:Can we visit your factory?
A1:Sure,welcome at any time,seeing is believing.
Q2:Which payment terms can you accept?
A2:T/T,L/C,Moneygram,Paypal are available for us.
- Q: i have to identify whether it is civil or criminal or both and which specific area of law involved adn discuss the key issues which are likely to be raised in court - Amanda had bought and renovated a large house which was converted into student flats, because she was running short of money during the conversion, Amanda decided to buy some second-hand gas heaters which she serviced and installed herself, despite not being qualified to do so. unfortunately, one of the heaters malfunctioned, allowing poisonous fumes into on of the flats.One of the students, Boyd was killed.His girlfriend, Celia was made seriously ill and had to spend weeks in hospital.
- Criminal as in the UK the Law states that all gas electrical equipment must comply with statutes relating to installations service of said equipments by qualified trades men. Corgi trained gas fitter to carry out Co2 test as that is more than likely the cause of death. After this a civil case to claim for death/injury by parents or guardians of the dead or injured. So this question was put in to trip or test weather you have done your Research Good luck
- Q: I might be starting a job doing industrial electric, and I want to make sure I can read the blue prints good. I am recently graduated from high school and have a vo-tech background in electrical, only no blue print reading. I know how to read schematics, ladder diagrams, and residential blue prints, but how different are industrial and residential blueprints? Does anyone know a site where I can look at some industrial electric blueprints? I know when i get there they will be able to teach me how to read it, but I figured I would try to save everyone some time and see what I can figure out before I get there.
- No, you shouldn't;t have any trouble reading Electrical Blueprints. Generally these are referred to as schematics unless they are Incorporated into a building or other design, then they are called blueprints. And the other difference is that a blueprint will layout primary feeds, conduit sizes, step down transformer placements and switchgear sites. Contractor locations and lighting loads and layout. So basically its a building block to help layout the actual wiring and equipment along with technical data to aide in installation and proper load capacities.
- Q: I am an undergraduate in Electrical Engineering and I want to design and work with generators. What institutions research electrical generators? What companies design/build electrical generators? What is the difference between electric drive systems and generators? are they the same thing?Much thanks.
- I've worked for a General Electric maintenance contractor named Granite in Carolton, tx. and Siemens Westinghouse in houston, tx. on 50 to 200 Megawatt turbine powered generators. Inspections and complete overhauls. they are always looking for someone to bring in.
- Q: I'm doing research for a project and am having a hard time nailing this one down. On that same note, what is a panel in the electrical engineering realm?
- Hardware is everything that is not the electricity itself, or what the electricity represents. In a computer, the hardware is the resistors, capacitors, wires and transistors all connected into a circuit. After accounting for all this, it leaves the electrons themselves traveling through the circuit. In terms of plumbing, it is the difference between the pipe and the water the pipes contain. The information is known as software. This is a series of electrical pulses generated at a precise rate. A beat can contain electrons or lack them. A series of beats is what forms the software code which determines how the computer functions. A panel is a flat surface which typically serves as an interface. An interface is a communication system set up to allow people control electronic devices. Panels traditionally contained contact switches or buttons. These influenced how the device operated. Without the interface, the user would have to disconnect and reconnect the circuits by hand. Computers use panels called GUI's. This is a graphical user interface. Microsoft windows is the best example. The software is represented by a series of small pictures and a special pointing device is used to start the software running. before GUI's, computer users had to type individual commands using another panel interface - the computer keyboard. Now keyboards are used mostly for work processing.
- Q: If you have a cell phone near any sort of electrical equipment that emits noise, old or new, you'll hear that skipping buzz noise. What causes this exactly, what is it, etc?
- The cell phone in fundamentally a radio. Radios emit radio frequencies energy which will interfere (RFI) with other audio equipment like an AM radio. You hear the noise while the phone is communication with the tower. It does this from time to time to let the tower know it is online and ready to receive data and of course to transmit/receive data. Hope that helps.
- Q: i want to measure the electrical consumption of my A.C,washing meachinefridge
- turn everything off except the washing machine then watch the power meter. or look at the data plate
- Q: hi, i am an electrican with 12 yrs experince within domestic/commercial/industrial industries.I am at the stage where i am thinking of my future career and would like to add more strings to my bow.But i dont really know what courses are out there, and which ones would make me more attractive to employers?I was thinking about going for the explosive atmosphere ticket and maybe the 2391, any help would be much appreciatted.
- it fairly is stable in case you savour doing the artwork of electric engineers no occupation is stable in case you hate artwork daily electric engineering, like assorted the engineering fields has some good factors like stable pay, many diverse varieties of jobs, possibilities to visit administration or different alterations, etc yet interior the top, the problem is, are you able to savour it (no longer all the products of prevalent, all jobs have stuff to hate, thats why they pay you, yet assorted the time are you able to savour maximum of it)
- Q: definition
- that girl really waffles on.an rcd monitors current flow between active and neutral.If an imbalance is detected between active and neutral it will mean that this imbalance is travelling to earth.The rcd's sensing equipment detects this leakage current and operates the release mechanism in turn switching off the power supply provided the leakage is equal or greater than the rcd rating ie 30mA
- Q: Gas turbine technician - electrical, seabee equipment operator, and mineman. Which would be the better job as far as the most interesting, important, and civilian equivalents?
- Which would be the better job as far as the most interesting, important, and civilian equivalents? Gas turbine technician - electrical
- Q: I am a freshman of the engineering program at the university of Wyoming. Right now I am going into electrical because I wanted to stay in Wyoming and I thought that it would be easier to get a job in the production and distribution of electricity through something like Rocky Mountain Power. I don't mind doing the math and physics for electrical, but I am thinking that I would enjoy becoming a mechanical engineer. At the moment I believe mechanical is much more hands on, designing parts and testing them. I don't know what these two would lead into though. Electrical makes more money, but is that worth it? Also how hard would it be to get a job in this region with mechanical?
- both electrical and mechnical are good field.
Send your message to us
Solar Pure Sine Wave Power Inverter 212V/24/48VDC to 110V/230VAC 1500W
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 10 unit
- Supply Capability:
- 500 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
