Self-Propelled Electric Scissor Lift Model: GTJZ08, GTJZ10

Inquire Now

OKorder Service Pledge

Quality Product, Order Online Tracking, Timely Delivery

OKorder Financial Service

Credit Rating, Credit Services, Credit Purchasing

You Might Also Like

型号规格 Model	UNIT	GTJZ08	GTJZ10
平台最大高度 Max platform height	mm	8000	9500
机器最大高度 Max machine height		9100	10600
平台最低高度 Min platform height		1300
底座离地距离 Ground clearance		104
平台稳定载荷 Lift rated capacity	kg	450	400
平台延伸部分载重 Platform extend capacity		112	100
工作平台尺寸 Platform size	mm	250611201100
平台延伸延伸长度Platform length extended		1270
最高驾驶速度(平台降下) Max drive speed(Platform stowed)	Km/h	4-5
最高驾驶速度(平台升起) Max drive speed(Platform elevated)		0.6-1
最小转弯半径 Min turning radius	mm	2700
最大爬坡能力 Max travel grade	%	10-15
轮胎尺寸 Tire size	mm	Φ406*125
驱动电机 Driving motor	V/kw	2*24/1.5-2.2
举升电机 Lifting motor		24/3
转向电机 Turning motor		24/2
蓄电池 Battery	V/Ah	4*6/210
充电器 Charger	V/A	24/20-25
坑洞保护系统Pothote Protection System	N/A	Auto Mechanism (机械控制)
整机长度 Overall length	mm	2510
整机宽度 Overall width		1170
整机高度 Overall height		2400
整机重量 Overall weight		2200	2280

Self-Propelled Electric Scissor Lift Model: GTJZ08, GTJZ10

Q: How much is the 8 square meter tatami mat: Look at the material you choose. Eight is not too small. It is estimated to be around 5,000-1w, without a lift

Q: What about the heat treatment of the lifting platform?: Servo feed system stability is the most basic condition to work, especially when low speed feed does not produce "crawl", and can adapt to the change of the external loads and does not produce resonance. Stability is related to system inertia, rigidity, damping and gain. The life of the feed system, is mainly refers to keep the transmission accuracy of nc machine tools and positioning accuracy of the length of time, namely the transmission parts's ability to maintain its original manufacturing precision, therefore, should be a reasonable choice material, heat treatment and machining process to the transmission parts, and adopt suitable lubrication method and protective measures, to prolong life.

Q: Does the shear fork lift stand belong to special equipment?: It belongs to special equipment, the manufacturer must have special equipment production qualification "special equipment manufacturing license" to be able to produce the sale shear fork lift machine. The products of the manufacturer without relevant documents are not eligible.

Q: What is the difference between elevator and elevator: Lifting platform refers to the above is a platform of lifting machinery, elevator is the work belt bucket elevator machinery, such as building used to transport personnel and the content of the elevator, generally called.

Q: How is the lifting handle of the universal knee-milling machine very tight: You're talking about a tight lock or a handle.I hope my answer will help you.

Q: The structure of the universal elevator milling machine: The bed is used for fixing and supporting milling machine parts. There is a horizontal guide to the top of the beam. The front wall is a vertical guide with tails, which can be moved up and down the platform. Internal main motor, main shaft variable speed, main shaft, electrical equipment and lubricating oil pump, etc. The beam end of the beam is equipped with a hanger to support the pole to reduce the bending and vibration of the pole. The beam can be moved along the horizontal guide of the bed, and its stretching length is adjusted by the length of the pole.

Q: Who can tell me the purpose of the elevator? The more, the better: Three column aluminum alloy elevator: three groups of the mast support work synchronized lifting platform, the back structure with single mast type platform, has a large capacity and good stability. Guardrail overall lift device, good strength, greatly reduce the machine when transport height, loading and unloading is very convenient, and through a lift can complete assembly or disassembly. The elevator is capable of carrying capacity, which is suitable for two people (portable weight tools and materials). Different kinds of non-standard products can be customized to meet different needs. Four column aluminum alloy elevator: the whole USES the high strength aluminum refined due to the high intensity profile, adopted four mast column type structure, excellent stability, flexible operation, capacity big, platform area is large, for convenience. Its light appearance can make the highest lifting ability in a small space. The deflection and oscillation of the lifting platform are minimal. The elevator is widely used in factories, hotels, buildings, malls, stations, airports and stadiums. It can be used for installation maintenance, such as power line, lighting appliance, elevated pipe, etc.

Q: How does the elevator repair: All parts should be filled with lubricating oil to extend the life of the bearing. The oil and oil level of hydraulic oil. The platform rises all the way up, and in this position, the hydraulic pressure should be 40 to 50 mm above the bottom of the box. Hydraulic oil is a variation of dark, sticky or grit, such as a discovery should be replaced in time (32 # hydraulic oil) Annual maintenance A. check all the hydraulic pipes and connectors. The pipe shall not be broken, the joints shall not be loose, and all the joints must be tightened. Remove and disassemble the descending valve, blow the plunger through compressed air, then load and resettle. C. the elevator hydraulic oil is put in the rejected, tighten the joint remove oil filter, after cleaning, use compressed air is clean, and then back into the tank, and the connecting line. (put on new oil and don't keep using the old oil. Otherwise, the moving parts in the system will accelerate the wear and tear.)

Q: What are the elevating institutions: The method of moving is different: fixed, drag-type, self-propelled, vehicle-mounted and drivable. A lot of hydraulic platform manufacturers also produce tyre boarding bridge, ground boarding bridge, and this kind of introduction.

Q: There are different kinds of milling machine and vertical lifting machine milling machine: Horizontal milling machine also can use the above all kinds of cutting tools, but not as convenient vertical milling, mainly can use the rack cutter (mainly side and face milling cutter, flake cutter, etc.). Milling tank, milling plane, cutting etc

Send your message to us

*Email

*TEL

*Quantity

*Unit