Fireclay Brick - High Strength Refractory Silica Brick G94
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 20 m.t.
- Supply Capability:
- 50000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
SILICA BRICK G94 for Hot-Blast Stoves
CMAX Silica bricks are made from high quality quartz tail sand, lime and mineralizing agent through the process of crashing, screening, mixing, pressing, drying and sintering.
Application
CMAX Silica bricks are commonly applied in coke oven, hot blast stoves, glass furnace etc.
Features
High refractoriness under load
High mechanical strength
Excellent thermal shock resistance
Corrosion resistance.
Good resistance against acid slag
High mechanical strength
Stable performance under high temperature environment
CMAX Silica bricks are made from high quality quartz tail sand, lime and minaralizing agent through the process of crashing, screening, mixing, pressing, drying and sintering.
- Q: how much fireclay is needed for 10000 refractory bricks?
- The amount of mud used for T-3 refractory brick is 0.3KG. if the tiler is skillful, the furnace should have joint of 2mm.
- Q: Scheme of cement kiln replacing 40 meter refractory brick kiln
- If only replace refractory bricks, it just needs three days under the condition of 200 degrees. It will be simpler if there is only free water in the refractory brick (no pouring material).
- Q: How to choose the proper refractory bricks when buying the refractory bricks?
- Crack condition. 4. 6. Inspection of dimensions. Conditions of pits and swells and lack of edges or angles. The inspection of refractory bricks' appearance quality and the condition of the affecting with damp.
- Q: Why should the clay bricks be watered first when they are building masonry walls?
- And because a portion of the water in the mortar brick absorb, can lead to early dehydration, but are not very good on the hydration of the brick and mortar bond strength weakened, greatly reduce mortar and masonry compressive strength, shear strength, affecting the integrity and seismic performance of masonry.
- Q: What is the refractory brick in silicious model?
- Adding appropriate amount of mineralized agent to promote the transformation of quartz in the body into phosphorus quartz. Smaller coefficient of thermal expansion. Also used in high temperature bearing part of hot blast stove and acid open hearth furnace, refractory materials and ceramic kiln, kiln vault and other load-bearing parts, thermal shock resistance variation. High temperature strength. the glass furnace is burnt in 1430 to 1350 degrees Celsius in the reducing atmosphere. use natural silica as raw materials. True density 2. more than 93% of silica content. generally there is no crystal type transformation above 600 degrees celsius. With acid slag erosion and sediment chamber regenerator performance, soaking furnace, open hearth furnace. there is more crystal type transformation below 600 degrees celsius. mainly used in coking chamer of coke oven and partition of firebox. acid refractory material made of high thermal shock resistance, large volume change, square quartz and a small amount of residual quartz and glass box . Long term use at high temperature without deformation
- Q: The renewal of refractory brick internal the lime kiln belongs to overhaul. In the absence of production, are the replacement of valve and sporadic projects also considered overhauls? Or routine maintenance!
- The replacement of fire brick is a major overhaul. If the part causes the furnace shutdown, which is also a major overhaul, so the key of overhaul is depends on what reason it is
- Q: do the used refractory bricks pollute the environment?
- the main pollution of refractory brick is coal gas pollution in the process of burning , it can be recycled to produce aggregate, waste brick has no pollution.
- Q: What are the reasons for the production of waste in the formation of fireclay bricks?
- The reasons for the production of waste when form fireclay bricks: Tile size is unqualified. This is due to the mold installation is not firm, the template transfers when molding; if the amount of material being added fluctuates largely, also can cause the body size changing. Ji Yangon Chi lie charge generation layer containing decyl poke pull and crack. The molding operation does not according to the principle of the light first and the thick later. At the initial pressure, the air doesn't releases, which causes the elastic aftereffect by repressing. Too much mud water, uneven mixture and inequal template all can make the body produce layer crack or crack. Twist. The template is used for too long, the template deforms, so raw brick deforms, the amount of water is too large, brick naturally deforms, causing the body twist. Miss edge and angle. Because of poor plasticity of mud, particles segregate, feeding back corner is not real, the body will appear side missing and angle modulation phenomenon. Bias voltage. Due to the deflection of the die head or the uneveness of mold bottom. Loose。 Due to insufficient feeding amount or insufficient pressure times.
- Q: How to wipe off the white paint on the refractory brick (red).
- Wallpaper knife should be ok
- Q: cement concrete What kind of cement should be used to manufacture high temperature resistant Kang cement?
- 1, Portland cement should be. Should use aluminate cement CA625. 2, and high alumina fragment yellow sand limestone should be mixed with high temperature solution 3, add some area of reinforced steel and steel can be thin or thick, but 6mm's diameter and 50mm's spacing of steel are suggested 4, according to the situation, add CA625 about 15%, brickbat about 60% and brick powder about 25%; 5, mixing with water to cement mortar until it is slightly thicker
Send your message to us
Fireclay Brick - High Strength Refractory Silica Brick G94
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 20 m.t.
- Supply Capability:
- 50000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords