Refractory Fireclay Bricks (SK-32,SK-34,SK-36)
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m.t.
- Supply Capability:
- 10000000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
Low bulk density, low thermal conductivity, good thermal insulation performance
High Alumina Brick Testing Report YT-1
Testing Item | Measurement | Testing Result |
AL2O3 | % | 65 |
Compression strength at room temperature | Mpa | 45 |
Porosity | % | 23 |
Softening temperature under compression 0.2Mpa | °C | 1500 |
High Alumina Brick Testing Report YT-2
Testing Item | Measurement | Testing Result |
AL2O3 | % | ≥60 |
Compression strength at room temperature | Mpa | 42 |
Porosity | % | 22 |
Softening temperature under compression 0.2Mpa | °C | 1470 |
Feature of Fireclay Bricks
Low thermal conductivity
High refractoriness
High mechanical strength
Excellent thermal shock resistance
Application of Fireclay Bricks
CMAX fireclay bricks are commonly applied in blast furnace, hot blast furnace, teeming ladle, glass furnace, etc.
FAQ
Q1: How do you control the products quality?
A1: With strict quality control system throughout the materials selection and production process, our refractory and ceramic fiber products quality is effectively controlled to meet customer requirements.
From the raw materials selecting, our quality control begin. The quality certificates of raw materials are required and each batch will be tested before using. During production, the quality control are conducted by workers and then each piece will be sorted and examined by quality supervis
Q2: What`s the lead time for my order?
A2: It depends on customers’ requirements and our production schedule. And usually we need 30-60 days for refractory bricks,10-25 days for unshaped refractory materials and 10-20 days for ceramic fiber blankets.
- Q: What are the differences between thermal?insulation?bricks and refractory bricks?
- Thermal insulation brick is thermal insulative; refractory brick is high temperature resistant.
- Q: How are shale porous bricks and clay porous bricks distinguished?
- Weathering resistance is better than clay brickDue to differences in clay shale and its performance, the national standard requires shale weathering properties than clay bricks.
- Q: What is the use of refractory bricks
- Most are industrial ceramics, glass, metallurgy, refractory brick kiln lining. It is also widely used in high temperature electromagnetism, magnetic materials, electronic ceramics, high alumina, clay, metallurgy, pharmaceutical, lithium industry pusher-type furnace.
- Q: Should refractory cement hang inner core when use carbon steel pipe make water heating hearth by self?
- I think it shouldn't. There is no refractories used for circulation pipe inside the boiler, and there is how long distance between pipe and coal fire
- Q: What is the size of mechanism brick and general refractory brick?
- The ordinary refractory brick is 230mm long, 53mm thick; red brick is 240mm long, 115mm wide, 65mm thick,
- Q: How many pieces of porous brick is equal to one ton?
- Refractory bricks are generally classified into two types, that is, shapeless refractory materials and shaped refractory materials. Shapeless refractory material: Also known as castable refractory, is hybrid power material composed of a variety of aggregate or a kind of aggregate and one or more kinds of the mixture of adhesive particles, it should be used evenly mixed with one or more kinds of the liquid, which has strong liquidity. Shaped refractory material: The general making of firebrick, there are standard rules for the shape, can also temporarily process according to need of building and cutting. The following are the specifications. fireclay bricks 230*114*65 each block 3.0 - 3.6 kg; special-shaped fireclay brick 230*65/55*114 each block 2.8 - 3.3 kg; the reason for the weight's ranges is that because the quality is different, in general, heavy density, good quality!
- Q: cement concrete What kind of cement should be used to manufacture high temperature resistant Kang cement?
- 1, Portland cement should be. Should use aluminate cement CA625. 2, and high alumina fragment yellow sand limestone should be mixed with high temperature solution 3, add some area of reinforced steel and steel can be thin or thick, but 6mm's diameter and 50mm's spacing of steel are suggested 4, according to the situation, add CA625 about 15%, brickbat about 60% and brick powder about 25%; 5, mixing with water to cement mortar until it is slightly thicker
- Q: What is sintered non clay brick?
- Unfired bricks are bricks used to build walls relative to sintered bricks.
- Q: What is the color of the refractory brick to repair the same color as the 1400
- Smash the same brick into fine powder
- Q: What are the factors that determine the weight of the refractory bricks?
- (5) Under high temperature, the volume is stable, the inner part of brick will produce unrecoverable volume shrinkage or expansion because of the internal transformation. Therefore, masonry inner will produce stress to make the material break and peel off, and the weight of a ton of bricks is determined by the bulk density and quantity, how much is the weight of refractory bricks, refractory bricks should have the ability to resist the damage, the weight of a piece of brick is determined by the bulk density: Refractory bricks are used under high temperature for a long term: Refractory bricks in the use of the process. Cooltech refractory brick used in various high-temperature equipment: The temperature of some parts of metallurgical furnace and other industrial furnace is uneven due to rapid temperature change during operation. (3) good thermal stability: Refractory bricks should not only have a high fusion temperature, no softening deformation and collapse, causing damage to the masonry. (4) strong resistance to slag: Modern metallurgy and the other industrial furnace heating temperature is generally between l000~1800. Refractory bricks should have the performance that is not easy to melt under high temperature. Therefore. Therefore, it is subject to high temperature conditions of physical and chemical corrosion and mechanical damage, the refractory brick must have the ability to resist high temperature chemical corrosion, the volume of refractory brick is required to be stable under high temperature. (2) High-temperature structural strength, chemical corrosion of metal, but also should have been built in the stove brickwork load or other mechanical vibration, often has the high temperature slag, so the refractory materials performance should meet the following requirements: (1) high refractoriness
Send your message to us
Refractory Fireclay Bricks (SK-32,SK-34,SK-36)
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m.t.
- Supply Capability:
- 10000000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
