Raw Materials for Refractory - Silicon Fume SF-92
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 m.t.
- Supply Capability:
- 5000 m.t./month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
CMAX Brand Silica fume is a byproduct of producing silicon metal or ferrosilicon alloys.It consists primarily of amorphous silicon dioxide (SiO2),its average granule diameter is 0.15~0.20 µm,specific surface area is 15000~20000 m2/kg.
1. Very low permeability to chloride and water intrusion.
2. Extremely high electrical resistivity.
3. Increased abrasion resistance on floors,highways,marin structures.
4. Superior resistance to chemical attack from chlorides,acids,sulfates.
Grey Densified and undensified Silica fume for cement
Analysis | Result | |||||||
SF85 | SF88 | SF90 | SF92 | SF94 | SF96 | SF97 | SF98 | |
SiO2(%)(min.) | 85.05 | 88.05 | 99.05 | 92.05 | 94.05 | 96.05 | 97.5 | 98.5 |
Fe2O3 (%) | 0.78 | 0.44 | 0.21 | 0.25 | 0.20 | 0.20 | 0.10 | 0.20 |
Al2O3 (%) | 0.29 | 0.20 | 0.21 | 0.25 | 0.20 | 0.20 | 0.20 | 0.20 |
CaO (%) | 0.39 | 0.30 | 0.36 | 0.30 | 0.30 | 0.30 | 0.30 | 0.30 |
K2O+ Na2O (%) | 0.29 | 0.24 | 0.22 | 0.20 | 0.20 | 0.20 | 0.20 | 0.20 |
Moisture (%) | 3.05 | 2.55 | 2.05 | 2.05 | 1.85 | 1.25 | 1.00 | 1.00 |
Loss on Ignition (L.O.I) @975OC (%) | ||||||||
- Q: Who know what kind of fire shutter fire rating are there?
- Fire resistance rating of the building elements is different due to the different requirements of the construction . Fire proof door can be divided into Serie A, B and C in terms of fire endurance limit, fire resisting limit are not should be less than 1.20h, 0.90h and 0.60h. That is, if the fire resistance rating is two, also it is possible to use a class a fire door. Hope my answer will help you.
- Q: What do RH and DH stand for in refractories?
- DH :For human intelligence (diameter, board of directors). )
- Q: Refractory net
- The development of the industry of refractory materials is very good, manufacturers are also more and more, especially in the Henan Xinmi side, next to the factory factory, we had visited gold refractory material factory, the scale is very large.
- Q: What are the meanings of azs, 34% and ec in fused brick?
- The fused brick, also called zircon corundum brick, is shorted as AZS for three chemical components in Al2O3-ZrO2-SiO2 ternary diagram. I don't know the meaning of EC.
- Q: What type of firebrick does TZ-3 represent?
- Z represents a straight brick, T stands for common brick, common straight standard brick, -3 represents the length, and the specification is 230 * 114 * 65 (mm).
- Q: How long is the fire endurance of Grade A fire resisting shutter
- Fire door can be divided into Grade A, Grade B and Grade C fire door according to its fire endurance. Their fire endurance is not less than 1.20h, 0.90h and 0.60h respectively. Use fire resisting shutter as fire?compartment separation in places where it is difficult to set firewall. When fire resisting shutter whose unexposed surface temperature rise is used as judging condition of fire endurance is used, its fire endurance should not be lower than 3h. When fire resisting shutter whose unexposed surface temperature rise is used as judging condition of fire endurance is not used, individual protection of ?closed automatic water spray system shoule be set at two sides of the shutters and duration of water spray system should not be less than 3.0h. When the fire resisting shutter is used for fire?compartment, fire endurance is 3h. When the fire resisting shutter is set at the opening part of firewall, fire endurance is 1.2h.
- Q: What kind of refractory materials should be used for the intermediate frequency furnace to smelt manganese?
- You mean furnace lining or ladle lining? Generally magnesia is used as furnace lining, but heat preservation should be practiced when shut down, or brasque would crack. Surly you can employ existing furnace lining which is sold in Tianjin, a little bit expensive, the average lining could be used for 300 furnaces. The furnaces made by magnesia myself break down after 40 furnace were finished. What I referred is a furnace weighing 2 tons, as for a bigger furnace, the existing brasque would be OK. What is the difference between furnace lining and ladle lining? Can you give me more detail about the materials of making a furnace weighing 2 ton? Why others can burn 80-90 furnace with 0.7-ton furnace; over 200 furnaces with 2 ton? What are these ingredients? What I know is just magnesia, magnesium borate, and together with boric acid, they also have many types, which one should I use? Thank you!
- Q: Selection of refractory materials?
- Inorganic non-metallic material with a refractoriness of more than 1580 degrees. Refractoriness refers to the temperature of a sample of a refractory cone, which is resistant to high temperature without softening, and does not soften and melt down. Refractory materials are associated with high temperature technology, which originated roughly from the middle of the bronze age. In the Eastern Han Dynasty has made China kiln firing porcelain material and with fireclay refractory sagger. In the early twentieth Century, refractory materials were developed towards high purity, high density and ultra high temperature products. At the same time, unshaped refractory materials and refractory fibers without firing and energy consumption were developed. With the development of modern technology, atomic energy, space technology, new energy technology, refractory material having high temperature resistance and corrosion resistance, thermal shock resistance, erosion resistance and other comprehensive excellent performance has been applied.
- Q: what is the common materials for home fireproofing material?
- 1, lumber core 2,decoration panel 3 , plywood 4 density board 5,chipboard 6 fireproof?panel, 7.gypsum board Hope to adopt my opinion
- Q: Which refractory is better for building 1500 degree kiln ?
- The top and wall use alumina hollow ball brick. If it is cubic kiln, the kiln bottom should use heavy corundum brick. If it is continuous kiln, burning zone should use alumina hollow ball brick, burning zone seal and kiln car face brick. If it is pit furnace, curved seal should use heavy corundum brick, and furnace wall and top should use alumina hollow ball brick. That depends on what kind of kiln it is. Curved seal and kiln car should use heavy corundum brick. You can add me friends to have further talks.
Send your message to us
Raw Materials for Refractory - Silicon Fume SF-92
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 m.t.
- Supply Capability:
- 5000 m.t./month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
Related keywords
