PVC Pressure Pipe (ASTM Sch 40 & 80) Plastic Tubes - ASTM, AS, BS, ISO, GB
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 kg
- Supply Capability:
- 10000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
pvc pipe for water drainage
1)Specification of pvc pipe:40mm-400mm
2)Thickness of pvc pipe:1.2mm-7.0mm
3)ISO certified.
2.Properties of pvc pipes:
1) Material: pvc pipe unplasticized polyvinyl chloride
2) Standard: GB, ISO9001, ISO14001
3) Color: white pvc pipe, grey pvc pipe , etc.
4) Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5) Vicat Softening Temperature, (C) >=79
6) Longitudinal Reversion, %, 150(C) <=5
7) Dichloromethane Resistance Test: No attack
8) Falling Weight Impact Test, TIR, %, 0(C) <=10
9) Tensile Yield Strength, Mpa >=40
10) Fitness of Water Tightness Test: No Leakage
11) Fitness of Air Tightness Test: No Leakage
3.Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
4.Application of pvc pipes:
1) Structure Engineering, home water supply and drainage
2) Water drainage/supply system
3) for Agriculture Irrigation, aquaculture
5.Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | ||||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | |||
φ20 | 20*2.3 | 20*2.0 | |||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | ||||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | |||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | ||||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | |||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | ||
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | ||
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | ||
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | ||
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | ||
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | ||
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | ||
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | ||
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | ||
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | |||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | |||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | |||||
6.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q:Can plastic tubes be used for promotional or sample packaging?
- Yes, plastic tubes can be used for promotional or sample packaging. They are versatile, cost-effective, and offer a convenient way to package and showcase products or samples. Plastic tubes can be customized with branding and graphics, making them an attractive option for promotional purposes. Additionally, their durability and ability to protect the contents make them suitable for sample packaging as well.
- Q:I want to connect some aquarium tubing to a regular plastic bottle, somewhere on the side, low down. It has to be a water and air tight connection and the bottle will contain water that will be drank so if any apoxies are used they have to be safe.How would you do it?
- I okorder /
- Q:I am hoping someone has designed a new, innovative style or shape of a bread box that is more functional as well. Is this a possibility or am I fantasizing about a bread box of the future? Anyone know where to buy one?
- Ask at at your local disability resource centre. They excel at handcrafting to specific designs. My local one exports garden furniture and they are fabulous. They love a challenge and you would have a unique bread box no one else does. Good luck.
- Q:Sometimes included in happy meals and the like. Had some sort of device that would slide back and forth inside it making the sound. Sounded like: oooooooaaaaaaaahhh lt;turn overgt; aaaaaooooohhhhh*Note* I need the name!lol.
- They are called groan tubes.
- Q:I hate the plastic tubes. They're fiddly awkward to use, especially as they get near running out. Metal was SOOO much easier. Just roll up the tube it stays rolled up. Just squeeze the metal it doesn't pop right up as soon as you release the pressure, but stays down. Basically metal packaging was right for the job. Plastic tubes are a poor, inadequate alternative, I hate them.It can't be due to cost, since so many drinks are still sold in metal cans, if it was down to the cost all the metal cans would be replaced with cheaper plastic alternatives, but they're not.So what is the reason it's only plastic for toothpaste now?
- It is due to cost. Drinks used to be sold in steel cans and glass bottles, now they are sold in aluminum cans and plastic bottles, due to cost. You can buy a plastic clip to put on the toothpaste tube to solve your problem.
- Q:Can plastic tubes be used for electronics packaging?
- Yes, plastic tubes can be used for electronics packaging. They provide a cost-effective and versatile solution for protecting and organizing electronic components. Plastic tubes offer durability, resistance to moisture, and can be customized to accommodate different sizes and shapes of electronic devices. Additionally, they can be transparent, allowing easy identification and inspection of the packaged electronics.
- Q:Can plastic tubes be used for transportation of gases?
- Yes, plastic tubes can be used for the transportation of gases. Plastic tubes have the advantage of being lightweight, flexible, and resistant to corrosion, making them suitable for various applications, including gas transportation. However, the specific type of plastic and its compatibility with the gas being transported should be considered to ensure safety and efficiency.
- Q:Are plastic tubes resistant to impact strength?
- Yes, plastic tubes are generally resistant to impact strength. They are designed to withstand various forms of impact without breaking or shattering easily. However, the impact resistance may vary depending on the type and quality of the plastic used in the tubes.
- Q:How do plastic tubes perform in low-pressure applications?
- Plastic tubes perform well in low-pressure applications as they are lightweight, flexible, and have good resistance to corrosion and chemicals. They are also cost-effective and easy to install, making them suitable for various low-pressure systems such as drainage, ventilation, and irrigation.
- Q:So I was eating GoGurt yogurt. And I think I accidentally swallowed a part or the jagged part on the top of the tube. I don't think it was very big. I'm guessing the size was the size of half of a dime or a 1/4 of a dime. I know this doesn't sound too bad, since I've heard people who swallowed pennies, then they were fine, but I don't know how to get rid of it. I can still breathe and drink normally, but when I talk for too long, my throat starts to hurt a little. So far, I've tried drinking lots of water, swallowing some food to push it down (rice. :D), coughing, vomiting, and clearing my throat but I think it's still there. I'm actually not sure if it's still there or if it is gone, or just made a cut so it hurts. But I don't want to go to the doctors or ER, I'm poor. Are there any other ways to get the plastic out? Oh and if I leave it there, how long will it take for it to go down my throat and digest?
- I doubt there's anything solid still in your throat. The pharynx in lined with mucus membrane and it's a sensitive tissue as well. It's made to allow things to slide through but it's also sensitive as a protective measure. I expect some very small area in your oropharynx or laryngopharynx was mildly irritated. It will resolve spontaneously. Did you for some reason think this might be the first time this has happened in the history of man? (I'm just teasing you) Don't force the coughing, vomiting (this raises new issues) or throat-clearing anymore, that serves only to further and prolong the irritation. Ignore it and by tomorrow afternoon, you'll suddenly realize your throat no longer hurts. @ Daniel, neither of what you list is CPR. I think you're trying to describe abdominal thrusts and a mouth sweep. These measures can be utilized along with CPR when they are appropriate. You've demonstrated clearly that not only do you do not know to perform either one but that you do not understand the purpose of them.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
PVC Pressure Pipe (ASTM Sch 40 & 80) Plastic Tubes - ASTM, AS, BS, ISO, GB
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 kg
- Supply Capability:
- 10000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
