PVC Fiber Reinforced Flexible Pipe Extrusion
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 30 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product introduction
This PVC pipe production line is mainly used in the agricultural water supply and drainage, water supply and drainage construction, cable supporting, thickness of pvc plastic pipe, The PVC pipe production line has conical twin-screw extruder, vacuum sizing box, traction machine, cutting machine, stacker frame and so on, Extruder, vacuum shaped tank, and haul-off machine motor produce high-quality products, haul-off machine have two-claw, three claw, and four claw, six claw, the cutter use knife-raised cutter or planetary cutter. And the stacker take into account length.
Characteristic
Pipe range | 20-63mm single | 20-63mm dual | 75-160mm | 110-315mm | 315-630mm |
Extruder | CMAX51/105 | CMAX65/132 | CMAX80/156 | CMAX80/156 | CMAX92/188 |
Extruder power | 18.5kw | 37kw | 37kw | 55kw | 110kw |
Extrusion capacity | 120kg/h | 250kg/h | 250kg/h | 360kg/h | 800kg/h |
Max. Production speed | 12m/min | 10m/min | 6 m/min | 3 m/min | 1.2m/min |
Process flow
PVC powder + additive → mixing → spring feeding → twin screw extruder → mould and calibrator →
vacuum forming machine → haul off machine → cutting machine → discharging rack
Capacity: Conical twin-screw extruder, suitable for process PVC powder with high capacity, max 1000kg/h
Diameter: from 16mm to 800mm
Auxiliary machine closely meet customer specifications. Nice out-look, automatic control and stable running performance
Application
PVC pipe is mainly used in the agricultural water supply and drainage, water supply and drainage construction, cable supporting, thickness of pvc plastic pipe, The lines have conical twin-screw extruder, vacuum calibration tank, haul-off machine, cutting machine, stacker or belling machine and so on. Haul-off machine have two caterpillar, three caterpillar, and four caterpillar, six caterpillar, the cutter use knife-raised cutter or planetary cutter which support chamferring function. And the stacker take into account length, production line is reliable performance, and high quality, we have exported to Egypt, Brazil, Syria, Uzbekistan etc.
Features
1) Main machine uses PVC twin screw, and notch feeder with powerful water
cover cooler, which has greatly improved transmitting capability and ensured
extruding.
2) Adopting double pipe extrusion method, it can greatly increase productivity.
3) Adopting high efficiency double-cavity vacuum calibrating technology and spray-paint
cooler gullet, which improve the finished product passing rate, and meet
the requirements of high speed manufacturing. Vacuum calibrating platform and cooler
gullet are all made of stainless steel
4) Adopting multi-caterpillar haul-off, through the central motor to run all the caterpillar
to reach same height, and ensure roundness of pipes
5) Adopting fully automatic control system with high precision, reliable operation,
easy and convenient handling
6) Suitable pipe diameter: 20 - 630mm
System configuration:
(a) Feeding machine
(b) Conical twin-screw extruder
(c) Mould
(d) Vacuum calibrating tank
(e) Hauling off machine
(f) Printing machine
(g) Pipe cutting machine
(h) Pipe pile-up frame
(i) Auxiliary machine such as mixer, water chiller, belling machine and crushing machine.
Product show
Our machine types:
1. Co-Rotating Parallel Twin Screw Pelletizing Extruders
2. Single Screw Pelletizing Extruders
3. Die Face Cut (Air Cooling) Pelletizing Extruders
4. Double Stage / Double Degassing Recycling Extruders
5. Crushers, Mixers, Storage Tanks, Vibrators, Granulators, Blowers
6. Extruder spare parts
FAQ
PVC sheet extrusion
*Q: What’s the price of this machine please?
*A: Dear customer, for each kind of our machines, we have lots of models.
Generally speaking, we design the production lines according to
different requirements of different machines from different customers.
Therefore, the prices are different. So please kindly inform us your requirements.
For example, the raw material, the output product size, capacity and etc.
The more detailed, the better. Our Engineers will design a suitable production line for you.
- Q: For example, 70 square conductors, the outer diameter is A, out of the insulation, then the line mouth to choose how much, how much plastic cover election? Then the sheath, then how to choose the mold?
- Depending on your specific specifications, if XLPE is insulated, extrusion die with small touch line, set on the use of cable diameter, large core conductor than a few tenths of good, if you like to use 70 square tube extruding mold insulation of the conductor element some is big 1 can be set according to the touch, the tensile ratio calculation, PVC1.6 DYWL material with smaller good-looking it is simple of the extrusion process
- Q: What is an extruder?
- Usually called extruder, it is a plastic extrusion machine.
- Q: Why is the connection between the extruder and the switchboard?. The upper and lower three terminals are short circuited
- The action should be to require three simultaneous electricalOr a two way backup
- Q: producing polyethylene polypropylene fiber, masterbatch in the dark spot under the light, that is, masterbatch does not change, filter replacement frequently, half an hour... 40The equipment is Changzhou Riyue extruding machine, production of polyethylene polypropylene masterbatch, a dark spot in the light, it is not frequent replacement of masterbatch, filter plugging, half an hour, I added the 30% filling masterbatch, how to solve this problem? Other particles are not wet either. Masterbatch is not turned for help
- 7042, no tax 9350-9400 yuan / ton, 02TN26 no tax,
- Q: Why do screw extruders often extrude light red plastic products?
- Cause this situation. Please clean the hopper thoroughly. The screw is also drawn out and cleaned up. It should be easy to solve.
- Q: Why can the plastic extrusion machine extrude the flat bar?
- What's the reason for pulling out the stripes?1, the vacuum is not enough.2, high temperature settings.3, formula lubrication is too much
- Q: What is the temperature setting of the extruder and how much is the setting temperature of the head and filter?,
- The temperature setting of the extruder is related to the material you manufacture. If the type of plastic is different, the setting temperature is different, and the material of different manufacturers is also slightly different from the temperature setting.
- Q: What should be paid attention to in the daily maintenance of the extruder?
- Extrusion machine regular maintenance mainly has these aspectsdrive system(1) check the temperature rise of motor and oil tank, whether the bearing is overheated locally, the abnormal noise of motor and gear, oil leakage, radial circle of oil filter and spline shaft, and the contact gap with the end of screw.(2) regularly clean the oil filter and remove the dirt at the bottom of the tank, and lubricate the lubrication points regularly.(3) the new gear box has been filled with gear oil, and new oil will be replaced every 4000 hours after the operation.
- Q: Who knows the structure of the big extrusion machine head (has cooled), smash what structure, model of plastic crusher?
- How big is it? Not too big. I suggest using a 40 or 30 too big block. You have to use a special break knot.
- Q: What are the components of an extruder?
- An extruder in which an air vent is disposed at the center of an exhaust extruder to allow removal of air and volatiles from the processed plastic. The main machine of plastic extruder is plastic extruderIt consists of an extrusion system, a drive system and a heating and cooling system. 1. extrusion system extrusion system includes screw, cylinder extrusion die head, extrusion die head, molding parts of the extruder. Also known as extrusion die, extrusion die. The utility model has the function that the plastic melt from the extruder barrel is well distributed in the die runner so as to be extruded and formed from the die at a uniform speed. The forming action of an extrusion die is in the process of complete extrusion (see plastics processing). A plastic extruder consists of an extrusion system, a drive system and a heating and cooling system. The classification system of extrusion system includes 1. extrusion screw, barrel, hopper, head, and mould, plastic extrusion system by plasticizing evenly into the melt, the establishment of Liu Hesheng basic information name in this process and Liu Hesheng taught: - professional engineeringControl science and EngineeringJob: in gender: Male College: College of mechanical and power engineering representative paper: melt rotating twin screw extruder in conveying flow solving teaching: research direction: mainly engaged in polymer material processingLinear low density polyethylene (LLDPE) linear low density polyethylene (LLDPE) linear low density polyethylene is structurally different from the generallow density polyethylene
Send your message to us
PVC Fiber Reinforced Flexible Pipe Extrusion
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 30 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
