PPR pipe reducing tee and Top reducer supplier All sizes available
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
Product introduction
Name | pp-r pipe fittings |
Color | green, white, gray, blue |
Connection | socket fusion joint, electro fusion joint or transition joint |
Material | random polypropylene |
Pressure Rating | 1.0Mpa,1.25MPa, 1.6MPa, 2.0MPa ,2.5MPa |
Service life | 50 years |
Size | 20mm-160mm |
Advantages of Production
1.Best price.
The modern automatic injection equipment, efficient managment, more than 90% skilled
workers which reduce the cost of our products. And our price is competitive all over the world.
2. High-precision moulds
Our high-precision moulds make better surface of our products. And also the size is very accurate.
All these make our products reliable.
3. Inspection system
We also have inspection system to keep the valves and fitting quanlity steady and good.
Our pre delivery inspection rate is 100% which make sure all products you get will be in
good situation.
4. Top supplier
We are one of the Top supplier in China. We export valve and fittings to more than
50 countries all over the world.
Packaging & Shipping
FAQ
1. Are you a manufacturer or trading company?
We are a professional valves and fittings manufacturer with 6 years' experience.We have done business with our customers well.
2. What is payment method?
For samples: T/T, western union.
For orders: T/T or L/C.
3. Do you offer free samples?
We can provide free samples and you should pay the freight. After you place an order, we will give back the freight.
4.What Is The MOQ?
MOQ depends on different items.
Please feel free to leave us message if you have any question about us and our products.
- Q:I have an adorable track suit that I purchased from Victoria's Secret ages ago (the kind that nobody ever actually wears for track.. ^_~), and it's made from deep wine-red velour. I went to put it on earlier, and realized that while the *outside* was soft, sensual velour, the *inside* was scratchy and not all that soft.It's the same way with clothing that's satin, or silk, or velvet, or that smooth satin-like fabric that I don't know the name of it always feels wonderful on the *outside*, but *not* on the part that's against my skin.Why is this??
- This Site Might Help You. RE: Consumer product safety act of 1972? What was the consumer issue that caused the need for the act? Why the revelent consumer issue became inmportant at the time the act was passed? was there a specific chain of events that led to the legislation who promoted the legislation?
- Q:Why should you keep a fire extinguisher handy when making the classic dessert crepes flambé de l’orange?
- I believe the sizes are the same as ASTM but in mm, internal and external, so for elbow radius. To be sure, try look the web for Anaconda an american company, They have factories in Mexico and Chile and also distribute copper piping for all those regions.
- Q:the lightning theif? is it any good? whats it about??
- This Site Might Help You. RE: If I Stuff A Blanket In A Microwave To Heat It Up, Will It Catch Fire? Okay, I know it sounds stupid - especially this being my first question - but I lost my heating pad, and need something warm for my menstrual cramps. So, if you don't know the answer to this, do you have some other cure for the cramps?
- Q:I need to talk about it in my physics class
- Are you familiar with any type of soldering? There is low temp, and high temp, depending on the application, and the type of solder that you use. The most important thing to remember, is to thoroughly clean the inside of the fittings, and the end of the pipe. If you cut a pipe, make sure that you ream the inside, to restore the inner diameter of the pipe to its full bore dimension, otherwise, water will eat the pipes, from the inside, and you will have a premature breakdown in your piping system. A non acid, water soluble flux is required, again, so your pipes won't deteriorate from the inside. Low temp soldering can use a propane torch, but high temp, requires a hotter flame, to melt the solder. Practice on some pipes, before soldering for real. Never leave your flame in one spot too long. Doing so will cause the flux to be burned at that spot, and no solder will take at that spot, thus, ensuring a leak. Move your flame around the whole joint, heating it up uniformly, and concentrate your flame towards the center of the fitting, as solder will travel towards the heat. Good luck!
- Q:okay. i just recently started masturbating. and i've only been using my finger but, once ur finger is in ur vagina, what do u do next? no rude comments, pleasethanks, and happy holidays!
- It sounds to me that your horse isn't happy being ridden at the moment. Get someone out to check his back, his teeth and the fit of your saddle, maybe even a blood test just to be sure. If he is in pain or discomfort he won't want to go forward.It sounds like he has been well schooled in the past so he wil understand what the leg means most horses really want to please the owner..who wants to be hit with a whip!! the fact that he is objecting so much makes me think he is unhappy. If everything comes back showing that physically he is OK consider investing in some lessons or send him to be schooled by a reputable rider. If he has never had his teeth done before he will definitely need them done. Horses teeth need to be looked at and rasped every 6 to 12 months. Get a chiroprator to look at him even very experienced trainers can miss pelvic tilts tight back muscles misaligned poll etc. Sorry to harp on about it but I have dealt with many many difficult horses and over 90% have had physiologically problems which once resolved had produced a tremendous improvement in work attitude..please please give it a try most chiropractors only charge for travel if the horse has no problems
- Q:I keep seeing those movies where the killer has a car that is filled up with water on the inside and their victim is inside dead as if they were trapped inside the car and drown. But the car isn't submerged in a pool or lake it is as if the killer put a hose in it and drown them. Can it be so simply done or do you have to water seal your car get all fancy like that? Just the random thought of the day.
- The plumbing is usually only as good as the plumber's work. I've used both pex and PVC and had equal success with both. Assuming we are doing residential plumbing, and sticking with 1/2-3/4 pipe, I prefer pex and push on fittings at work because I can do the work very quickly plus I don't have to worry about drying time to put pressure on the lines. If I were going to do this work in my home, I'd definitely go with PVC because it's much cheaper. The trade off is time vs. money. If time is more precious, go with PEX, if cost is more of a factor, go with PVC. Obviously do your drain lines and stacks in PVC. PVC cement is more or less universal-just make sure you use cement meant for CPVC and PVC and use with PVC primer.
- Q:Sit by:the fire or a space heater?Drink:hot chocolate or coffee?tea or hot buttered rum?Eat:cookies or cheesecake?turkey or ham?stuffing or mashed potatoes?Wear:hat or earmuffs?scarf or turtleneck?mittens or gloves?Bundle up with:snuggie or blanket/quilt/throw/comforter/etc?socks or slippers?Weather:snow or rain?
- Since you're talking about plumbing - no, there's no reason why a plumber would want to use a clear piece of plexi on the end of a pipe. They'd just put a cap to seal off the end. I don't actually know, but my suspicion is that plexiglass would probably bond to PVC with PVC cement. That's easily tested with scrap. If so, get your PVC pipe and there are lots of fittings that will fit on the pipe and still be open ended - unions, adaptors. Go to Home Depot or Lowes and just shop. Assuming the glue works - glue on the fitting and then just glue on the plexi. You COULD just cut the end of the pipe, but using a fitting will give you a machined-flat surface to glue to.
- Q:What 17th century Catholic Priest invented the first working parachute?
- never use PVC screw-together pipefittings if you can possible avoid those connections the PVC purple glue is water resistant and does the best job . if you are able to get under the new shower and change those connections that is what I reco
- Q:Who can tell me that one is a card sleeve, one is threaded sleeve joint, and the other is the card sleeve type joint, what's the difference?.I have a drawing at the same time to use these two, are 1 inches of joints, I do not know how to distinguish between the names.
- The two ends of the card sleeve is called the sleeve type right angle pipe joint
- Q:I am tight on money but i need to buy a vest for jumping. It can be used but in decent condition. Thanks for the suggestions!Btw it can be any color
- If you are trying to join a copper pipe to a PVC pipe, you will need a transition. There are several ways to make the transition. It depends on your skill level and the access to various parts. The easiest way is to find a plumbing store (even Lowe's or Home Depot) that carries manufactured transitional fittings. The inside diameter will not matter, just the actually pipe size and material. If you can't find these kind of fittings, you can either sweat a female adapter onto the copper and then use a PVC male adapter or you could use the same concept with a compression fitting for the copper side. Hope this helps. You can contact me directly if you need more info. Good luck.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
PPR pipe reducing tee and Top reducer supplier All sizes available
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches