The special elevator of industrial residue (slag, steel slag powder,fly ash, carbide and other high abrasion material) is used to replace the traditional chain elevator, which have great comprehensive advantages. It is Widely used in production line of slag and fly ash, grinding station, etc.

      The Installed power and operating power of the steel cable belt bucket elevator are less than chain elevator, and tape life and abrasion is also better than the chain elevator, it can be used in 120 ℃ longly, is running  with very low failure rate.

  1.The technical features as follows:

           1.1 The steel cable belt for bucket elevator has independent intellectual property rights.

              1.2 Belt joint device that has independent intellectual property rights of Bucket elevator is made special treated.

              1.3 It has improved head device, matches with high wear-resisting vulcanization head wheel and cleaning device.

           1.4 It has modified tail device, matches with rod cage and high precision tail wheel.

           1.5 Improved strength tension mechanism of parallel four connecting rod and anti-corrosion treatment.

           1.6 Shell and hopper are painted professional anti-corrosive paint.

           1.7 Reduction scheme of positive pressure

           1.8 The fixed technology of hopper has independent intellectual property rights.

           1.9 The type of drive is suspension simply supported mechanism .

           1.10 Reliable seal of  head, and overall built-in tail dust bearing

           1.11 The operation of control and protection device is perfect.

        2  Technical Features

           ——Lifting height is up to 140m

           ——Conveying capacity is up to 1335 m3/h

           ——Instantaneous material temperature can reach 180°C

        3   Model

  Table of conveying capacities                                   table 1

Notes:a.  The bucket volume is the volume when taking water, ф is the material filling ratio.

          b.  The maximum lifting height is the center distance C between the head shaft and the tail shaft.