Polished Porcelain Tile Nano Crystal Jade CMAX26601/26602/26603
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
Polished Porcelain Tile Nano Pilate Jade CMAX26601/26602/26603 is one of the most popular color of Pilate Jade Serie, which is one serie of Polished Porcelain Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.
Full glazed polished tiles are on the basis of the traditional polishing brick surface glazing and polishing products, whole set polished tile and glazed ceramic products archaize brick both advantages in one, not only glaze as smooth as polished tile brightening, like archaize brick pattern of design and color is rich, thick gorgeous color, natural texture, and the environmental protection and energy saving, service life long advantages and the low barriers to entry.
Product Features
Polished Porcelain Tile, Double Loading
Only Grade AAA available
Strict control on color shade, deformation, anti-pollution, surface glossy degree as well as packing
Competitive price
Standard export packing: Pater Carton+ Wooden Pallet
Fast delivery
OEM service could be offered
Marketing support on samples, catalogues as well as carton designing
Professional sales team for product, document and schedule of importing and exporting.
Product Specification
Tile Type: Polished Porcelain Tile
Quality standard: GB/T4100-2006, ISO13006, ISO9001
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Rupture Modulus: 》40 MPa
Length and Width Tolerance: ±0.1%
Surface Smoothness: ±0.15%
Edge Straightness: ±0.15%
Wearing Strength: 《1600 mm3
Glossiness: 》 85 Degree
Resistance to Chemical: Class UA
Resistance to Staining: Class 3.
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl
For 800x800mm, 3pcs/Ctn, 28 Ctns/Pallet, 616 Ctns/20’Fcl, 1182.72m2/20’Fcl
Production Line & Package
FAQ
1. For Polished Porcelain Tile, is the 30*60 available?
—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 6 pcs are packed into one carton.
2. What is the MOQ for this tile?
—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.
3. Can we use the carton with our own design and brand name?
—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers, due to the carton factory can’t arrange production if quantity is below 5000 pcs.
Full glazed polished tiles are on the basis of the traditional polishing brick surface glazing and polishing products, whole set polished tile and glazed ceramic products archaize brick both advantages in one, not only glaze as smooth as polished tile brightening, like archaize brick pattern of design and color is rich, thick gorgeous color, natural texture, and the environmental protection and energy saving, service life long advantages and the low barriers to entry.
4. Why choose our Floor Tile?
1). Less investment and shorter lead time because we ship tiles directly from Factory.
2). Better ETD and more stable price bacause we keep abundant stock for future needs.
3). Experienced service because we have an experienced team and we could send our experienced engineer for guving useful instruction on your jobsite.
4). Better warranty of products because we enjoy a reputation and we have got varies certificates and awards for our products.
5. What exhibition we joined?
1). Canton Fair (every year)
2). Dubai Big 5
3). American Covering
6. What's the characteristics about porcelain tiles and glazed tiles? Which one
more slippery, more aesthetically pleasing and easy to clean?
7. How to choose bathroom tiles? Porcelain tiles or glazed tiles?
Currently used in the bathroom tiles with glazed tiles (mainly from price considerations, some high-end can choose tiles, notice to choose tiles), divided into Shinny and Matt two kinds. Light color makes people feel shinny, but the bathroom more appropriate to create a warm feeling, so the best choose is uses matte, the shinny feels more soft and not dazzling.
- Q: 10x7 ft room (70 square ft)I already took up the linoleum which was hard to do and there is some linoleum backing on most of the floor I cant get up that they will removethey will lay something on the floor that will prevent the tile from crackinggluing down the tile and grouting and sealing itI am in the southgrand total $1000.00 labor labor and materials is $15.00 a square ft
- That sounds about right for hiring it done.
- Q: How to remove the shoe oil into the tiles
- Also provided by Grammy Music Ceramics Tiles in the course of the use may be due to improper use of surface contamination caused by the phenomenon of common seepage of several treatment methods are as follows: 1, tea stains, fruit stains, coffee, jelly vinegar, shoes and other stains using sodium hypochlorite dilution (bleach), soak for 20-30 minutes after use with a cloth wipe; some infiltration of brick longer stains, soaking Time takes a few hours. 2, ink, anti-fouling wax moldy moldy, the use of sodium hypochlorite dilution (bleach). Use as long as the bleach applied to the stains soak for a few minutes to clean. 3, cement, scale, rust, rust using hydrochloric acid or phosphoric acid solution, can be wiped several times. 4, paint, oil, oil mark, the surface of anti-fouling wax layer using alkaline cleaning agent or organic solvents (and 5 ketone, triethylene), to paint to oil. 5, gum hammer decontamination Use: first use 20% -40% sodium hydroxide solution soak for 24 hours after the wipe with a cloth, and then 30% -50% hydrochloric acid solution soak for 30 minutes Cloth wipe clean. 6, ice cream use alkaline cleaning agent. 7, lime scale use of acid cleaner. Note: 1, more than the use of defibrillators need to wear plastic gloves. 2, the stains will be removed after the water to wash the brick surface. 3, the market or supermarkets have the latest decontamination detergent, can refer to the scope of the above decontamination and methods.
- Q: My husband and I laid 4x4 square ceramic tiles on our counter tops. We have sealed them and everything....So the question I have is how do you get rid of the sandy resadue on the tiles from doing the grout work?
- Hi! It's kind of hard to get the dull surface from the grout off of the tile surface. If you did a countertop, you should have used non-reinforced grout (no sand). The dull surface and sand is usually completely removed with a natural sponge and water before the grout is sealed. It takes some work.
- Q: In order to be able to tile the windows (instead of the white moulding) like in the second kitchen, what steps would I have to take? Just remove the moulding on the inside then tile?
- Yes, carefully remove the moldings before tiling. Using a utility knife, cut the caulking between the molding and the wall first so you can pry them off with a prybar or small putty knife. In the picture, it looks like they also tiled inside the window frame as well. I would consider this carefully, as those windows are probably designed to be removed from the inside and tiling there could prevent you from replacing them in the future.
- Q: I live in Tennessee near nashville, I want to recarpet and ceramic tile in my house but want an estimated cost, of how much so i dont get jipped It‘s a 2,000 sq ft house and.. its two bath one kitchen for tile and three bedroom and living room and hallway for carpet.. anyone know where i can get help i dont want to overpay at all! also empire company has anyone ever done business with them? know if they are good at all///?
- DO NOT buy overpriced ceramic tile at a huge chain store. Find a discount builder warehouse of some kind that carries flooring supplies. We recently put new 12x12 tile throughout our entire house and paid only 68cents per tile! We got rid of all the carpet, it is so nasty! You wouldn't believe the germs, mold, dirt, sand, bugs, etc., that get trapped underneath, no matter how much you vacuum. The labor price depends on the worker. Ask around, find a friend who knows someone who lays tile. We had a friend lay ours for about $1.00 per square foot.
- Q: 16 by 16 tiles
- Tile labor varies a bit from area to area, but you can figure in the $7 a s/f range for basic labor , thin set, grout and 1/2 cement board , which is generally need when installing over the common wood sub floors. Tile isn t figured in this price since a plain , average or discontinued tile can go from $1 a s/f to a very nice tile in that size at 4$ a s/f Extras such as rip out/ disposal and any floor prep isn t included either. Any questions you can e mail me through my avatar.. GL
- Q: I need to know the quality of all different kinds of tiles. Please name the tile and the list or features of it so I can see which tile has the best and worst quality! THANK YOU!
- Tiles that are glazed on the top of a terra cotta base are cheapest. If the glaze chips, the underlying terra cotta base will be an eyesore. Tiles that are ceramic all the way through are best. Look for tiles that are the same color underneath as the glaze is on top. Tip: If you can convince the tile setter to set them diagonally, you will be forever grateful. It costs more, but it's worth it. Honest.
- Q: how to install the tin molding around the edge of the tiles
- Usually this is tacked into place with a few small nails. In the past i have experimented with using a contact adhesive to install the tin tiles and the molding strip, but this can be a bad option depending on the embossed pattern in your tiles or molding strip. The best and most secure option is to line the ceilding with ply (9mm thick or more - screwed into your ceiling joists so is secure) then to nail (small tacks) the tiles and the strips into place. You can also position the tiles and strips with contact adhesive to get them all in the right spot then go through and nail off when you are happy with the positioning.
- Q: your supposed to?Would it damage the tiles?
- Ceramic tile has a glaze on it which keeps the vinegar from harming the tile, however--you might have to reseal your grout if you use to much vinegar over a period of time. Vinegar can work on the grout like an acid if it isn't diluted properly. One teaspoon of vinegar to one quart of water is best.
Send your message to us
Polished Porcelain Tile Nano Crystal Jade CMAX26601/26602/26603
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
