Polished Porcelain Tile Crystal Jade Serie Pink Color 26602
- Ref Price:
-
$3.90 - 4.00
/ m²
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
Polished Porcelain Tile Crystal Jade Serie Pink Color 26602 is one of the most popular color of Crystal Jade Serie, which is one serie of Polished Porcelain Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.
Product Features
Polished Porcelain Tile, Double Loading
Only Grade AAA available
Strict control on color shade, deformation, anti-pollution, surface glossy degree as well as packing
Competitive price
Standard export packing: Pater Carton+ Wooden Pallet
Fast delivery
OEM service could be offered
Marketing support on samples, catalogues as well as carton designing
Professional sales team for product, document and schedule of importing and exporting.
Product Specification
Tile Type: Polished Porcelain Tile
Quality standard: GB/T4100-2006, ISO13006, ISO9001
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Rupture Modulus: 》40 MPa
Length and Width Tolerance: ±0.1%
Surface Smoothness: ±0.15%
Edge Straightness: ±0.15%
Wearing Strength: 《1600 mm3
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl
For 800x800mm, 3pcs/Ctn, 28 Ctns/Pallet, 616 Ctns/20’Fcl, 1182.72m2/20’Fcl
Production Line & Package
FAQ
1. For Polished Porcelain Tile, is the 30*60 available?
—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 6 pcs are packed into one carton.
2. What is the MOQ for this tile?
—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.
3. Can we use the carton with our own design and brand name?
—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers, due to the carton factory can’t arrange production if quantity is below 5000 pcs.
Full glazed polished tiles are on the basis of the traditional polishing brick surface glazing and polishing products, whole set polished tile and glazed ceramic products archaize brick both advantages in one, not only glaze as smooth as polished tile brightening, like archaize brick pattern of design and color is rich, thick gorgeous color, natural texture, and the environmental protection and energy saving, service life long advantages and the low barriers to entry.
4. Why choose our Floor Tile?
1). Less investment and shorter lead time because we ship tiles directly from Factory.
2). Better ETD and more stable price bacause we keep abundant stock for future needs.
3). Experienced service because we have an experienced team and we could send our experienced engineer for guving useful instruction on your jobsite.
4). Better warranty of products because we enjoy a reputation and we have got varies certificates and awards for our products.
5. What's the characteristics about porcelain tiles and glazed tiles?
Glazed tiles are colorful, the effect is rather diverse, stain-slip, abrasion resistance but worse than the porcelain tiles. Long-term use may wear a large surface; porcelain tiles have the higher degree, long hard wear surface. Good performance and stable cleanup (before playing the best times to use the wax to improve stain resistance). The porcelain tiles are weaker performance in non-slip than glazed tiles. We should take attention on its anti-slip properties, face down in a tiled brick water testing.
- Q: I have a rental that currently has sheet vinyl in the kitchen that is in bad shape. I am considering putting in self adhesive floor tiles over the vinyl. I have installed similar flooring in a bathroom but used inexpensive tiles. It looked good, but the tiles tended to slide. I‘m thinking it was because I used bargain tiles rather than better quality.I just need comments as to longevity and problems you might have encoutered with self adhesive tiles. Also, do you have any particular brand or type you recommend?
- I have used them for over 10 yrs now with NO PROBLEMS. Maybe your not taking the time to prep your floor and we all know the prep is very important. I personally would take that vinyl out and lay on your sub floor. As in any product if you take the time to read and follow their directions you'll be fine. I not only use this type of tile in my own home but clients too. I ripped out a nice ceramic tile in a doctors house and put this tile in its place, 2 baths and it's been 3 yrs now and no problems. good luck.
- Q: We're remodeling our bathroom and looking for tile. Thanks in advance!
- I have seen prices on the web and yes you can get some good prices. BUT Shading for what you see in a picture is vastly different then actual products.... What I would do is to look on line for lines of tiles from a wide range of manufactures and use their store locater to find a dealer near you.I ve seen the way tile is shipped from some sources that are not used to handling tile and you could possible end up w/ chips. Plus your local store has a vast variety of knowledge of trims and what you ll need.. I did my GF s mom s place and we looked at tile to get ideas for her and narrowed down to tiles she liked. The on line price was more expensive than what the store was and what we payed .Any questions you can e mail me. GL
- Q: How I can install ceramic tile on a wall and what tools do I need to do so? Any other tip that I should know about it to do a good job would be appreciated.
- the okorder , or diynetwork online and type in ceramic tile, and you'll get dozens of hints/ tips and tricks that will show you what you need to know. i'm not taking anything away from the other answer, he's completely right, just a little vague maybe. do some research, and this is something you can do. just know what you're doing first. tile is expensive.
- Q: it is literally burning hot have no idaea wat the problem is plzz help:). porcelain tile btw
- is the basement below this bathroom?if so it could be the heat from a pot light. you would not believe the heat one throws off
- Q: Hey there. We are in the process of adding a half bath to our home. We purchased tiles months ago at a tent sale at out local tile store. We have some wall corners that might require bullnosed corner tiles but this wasnt taken into account when we purchased the tiles and now we cannot find matching bullnose tiles anywhere.......Is there any was to finish the wall edges without using bullnosed tiles and have it still look good???
- Bnose tile is a new simplified way of doing tile and was to remove one of the grout edges. So all you have to do is grout the top like they did in the old days a few years ago. You could also use a thin lat of flat trim, a brass or stainless steel edging, or caulking that matches the wall or tile. I think the simple grout is your best bet. PS. Where corners meet If the tile is same color through they can show. If it is glazed colored or just a thin color on top then no. In that case cut the tile back so that they do not quite reach the corner. Then there will be a slight inverted corner where you will grout or caulk. In neither case would you want to miter the corner. It will be too sharp and thin corners would be weak enough to chip.
- Q: are tiles get really dirty fast and i tried everything and i cant get them to stay white could i use bleach?
- If they're a natural rock, like travertine, use Tilex and scrub them with a stiff plastic bristled brush. Use a cloth with hot water and a mild detergent to take up the excess Tilex. Then put down a tile sealer after it's dried. This will keep them from getting dirty again so fast. If they're ceramic and have hard water stains or whatever on them, you can use Tilex for the grout and CLR on the surface. Put a moist cloth down and pour the CLR over it to let it soak for about 15 minutes. The hard water stains should soften and come up easily. BTW - if this is a mildew problem (like in a shower or around a bath tub), don't use bleach. For some reason, even though it kills the mildew initially, it actually fosters the return of the mildew quickly.
- Q: For some reason I‘m having a hard time finding a good DIY instruction page on how to remove floor tile. Half of them are about removing just one damaged tile and the rest all have different methods. Some say to place a towel on top of it and smash with something, others have different machines. I‘m not really sure where to start. The space is about 5‘ x 5‘ and the tiles are the tiny kind, like 1 sq. inch each. What tools do I need? Do people usually tile underneath wooden vanities? Will I have to take it up? Help!
- First stop should be a Home Depot or Revy or whatever building supplier you have near you. They will know and have the tools you might need and could give good advice on the easiest removal. Unfortunately there are no magically easy ways to do this. If you are able to attack an edge, good for you. Use a good, sturdy scraper. Perhaps even one that you will be able to use a hammer on the end of. Then it is just simply a matter of elbow grease and determination. Actually, a 5' X 5' space will come off fairly quickly once you get started. If you are not able to start at an edge, you will have to make one by chiselling out a few tiles until you can get your sturdy scraper working again. just scrape a few grout lines and pry out some tiles. Please wear safety glasses and gloves throughout this whole procedure. These things will chip and have very sharp edges. The next part is to be sure that you scrape off all of the thinset (glue) that was holding the tiles down. You are now almost ready to re-tile, if that is your goal. If it is, then just be sure that the area is solid and clean and you are good to go. As for tiling under a vanity . . . some do and some don't. New home bulders certainly don't in order to keep costs down. It certainly is not necessary as long as the vanity will be the right height after you are done. There could be a 1/4 to 1/2 inch height difference due to the thickness of the tiles. Hope this helps. George
- Q: i will be laying tiles o my bathroom floor and i am wondering if HomeDepot or Lowes do the tile cutting. i dont want to purchase the wet saw. i will need to cut tiles for corners and things like that. Thanks.
- Lowes Ceramic Tile
- Q: is it hard to do a tile back splash for someone that has no experience it is a small area in the kitchen
- Oooh! Oooh! I saw something about this last weekend on the DIY channel, and I plan on doing it, myself, in our kitchen, too! I scribbled notes while I watched--here's what I've got: Measure the space for the backsplash. If you are tiling over an uneven surface (like over old tile) you will have to create a smooth surface over what you have. To do that, you will need to install some trim to the uneven surface of the wall for studding to provide a place to affix backer board, and then affix backer board over that trim. That will give you an even surface for your new tile. I don't have notes on thype of wood or measurements for that studding, but if you ask at your hardware store, which is what I will need to do, I'm sure they can guide on that. You fasten the studding to the wall along the top and the bottom of your area to be tiled, and then in between those top and bottom studs at intervals sufficient to support your backer board without buckling when you press on it. Maybe the hardware store can advise on that distance, or you can just test it as you go. You fasten the studs to the wall with a nail gun, and then the backer board to the studs with a nail gun. Now you've got a new surface. Next, spread your plaster onto the backer board. I'm assuming you are buying your new tiles in sheets. Set your sheets of tile onto the plaster (don't remove the fronting paper from the tiles yet), starting in the center/bottom and working out, and up. When the tile is set, use a damp sponge to wet the fronting paper and peel that off gently. Now mix your grout, and apply that over the tile with a trowel. Wipe excess group from the tile faces, but be sure not to wipe away from between the tiles. You are finished! Luckily, the space for my backsplash is a rectangle without any oddly shaped areas besides that. I know I can do this, with some advice from the people at my hardware store. Hey: We can DO this!!!! Good luck!
- Q: More specifically, do you lay the tile right against the floorboard with no groat visible? Or would you put a spacer in between the floorboard and the tile so that it you have grout along the edge?
- when i lay tile i cut as close as i can to the base board it looks much better than having a wide grout line next to the base board that's how it should be done good luck
Send your message to us
Polished Porcelain Tile Crystal Jade Serie Pink Color 26602
- Ref Price:
-
$3.90 - 4.00
/ m²
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
