NON-RISING STEM WEDGE GATE VALVE DN40-DN600
- Ref Price:
-
$10.00 - 100.00
/ pc
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 9999 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Quick Details
Standard or Nonstandard: | Standard | Structure: | Gate | Pressure: | Medium Pressure |
Power: | Manual | Material: | Casting | Temperature of Media: | Normal Temperature |
Media: | Water | Port Size: | DN50 | Place of Origin: | Tianjin China (Mainland) |
Brand Name: | CMAX | Nominal diameter:: | DN40-DN600 | Working pressure:: | 10bar/16bar |
Valve Design:: | DIN3352 | Face-to-face:: | DIN 3202-F4/F5 | Flange accommodation:: | EN1092-2 PN10/16 |
Test Standard:: | ISO 5208 |
Packaging & Delivery
| Packaging Details: | Resilient Wedge Gate Valve : plywood case |
| Delivery Detail: | Resilient Wedge Gate Valve :15 days |
Technical Dates
Nominal diameter: DN40–DN600
Working pressure:10Bar/16Bar
Valve Design: DIN3352
Face-to-face: DIN 3202-F4/F5
Flange Drilling:EN1092-2 PN10/16
Test Standard: ISO 5208
1. Product Type
Ball Valve, Butterfly Valve, Gate Valve, Knife Gate Valve, Globe Valve, Check Valve,
Reducing Valve, Safety Valve, Strainer, etc.;
2. Standards
American Standard (API), German standard (DIN), International Standard(ISO),
GB (GB), British standard (BS), Japanese Industrial Standards(JIS), GOST, etc.;
3. Features:
Design - API 608/ API 6D/ BS5351/ ANSI B16.34/ ISO 14313/MSS SP 72
Face to Face & End to End - ASME B16.10/ ISO5752
Ends - Wafer, Flange RF, RTJ, SW, BW,
Fire Safe - API 607/ API 6FA
Test - API 598
Seat - PTFE/ RPTFE/ VITON/ UR/ EPDM/ NBR/ NR/ Graphite/ Metal to Metal
Bore - Full Bore/ Reduced Bore
Fabrication - One Piece/ Two Pieces/ Three Pieces Body
4. Material
ASTM A216 WCB , A351 CF8, CF8M, CF3, CF3M, CF3MN, CN7M
A890 4A, A352 LCB , ASTM A105, A182 F304, F304L, F316, F316L F51,LF2
| Parts | Material |
| Body&Bonnet | WCB, WC6, LCB, LCC, CF8, CF8M, Ti, Hastello C, 904L |
| Disc & Ball | WCB, WC6, LCB, LCC, CF8, CF8M, Ti, Hastello C, 904L |
| Hinge | WCB, WC6, LCB, LCC, CF8, CF8M , Ti, Hastello C, 904L |
| Seat | A105,F304,F316,PTFE,RTPFE,VITON,NYLON,NBR |
5. Nominal Diameter (Size)
150#~2500# : 1/2"~80" (DN15~DN2000)
6. Nominal Pressure
Class 150---Class 2500 (PN16-PN420)
7. Operating Temperature
-196 °C --- 650 °C;
8. Application
Chemical, Petrochemical, Oil & Gas, Power Plant, General Industry etc.;
9.Certificate :
API 6D, API 6FA, CE, ISO 9001
- Q: What do you mean by "2" and "200 CF8M"?
- CF8M is stainless steel, and 2 is caliber 50200 and should also be bore
- Q: What is the difference between the cut-off valve and gate valve, the general will use the cut-off valve instead of gate valve
- Yes. Globe valves and gate valves are indeed common in certain piping and operating conditions.
- Q: What's the difference between open rod gate and dark rod gate valve?
- 3, dark rod valve is located inside of the body, in the process of opening and closing, stem only rotation move, the gate in the valve body lifting; the valve stem rod driven gate valve with the valve stem of the lifting drive thread in the external body, according to the direction of movement of the stem and the position of judge the gate opening and closing and position;
- Q: Why does the fire hydrant box in the air defense area need to be added with gate valves?
- when the envelope from the introduction of civil air defense, air defense should be set in the side of retaining structure; through the protection unit between the closed wall, should be installed in the pipe walls on both sides of the door closed;2 protection valve nominal pressure shall not be less than 1.OMPa;
- Q: What is the difference between an elastic gate valve and a rigid gate?
- Brief introduction: the valve gate valve is a gate opening and closing parts, RAM direction of motion perpendicular to the direction of the fluid, valve can only be fully open and fully closed, can not be adjusted and the throttle. Gate has two sealing surface, the most commonly used mode gate valve of the two sealing surface to form a wedge, wedge angle with valve parameters vary, usually 50, medium temperature is not high when 2 degrees 52'.Wedge gate valve can be made into a whole, called the rigid gate; can also be made to produce micro deformation of ram, in order to improve its process of deviation, make up the sealing surface angle in the process, the gate is called the flexible gate.
- Q: Will the water supply and drainage to wear civil air defense gate valve, the use of bright rod or dark rod?
- 3, soft sealing rubber lining valve plate size uniform, interchangeable. Therefore, the soft sealing gate valve will be the direction of development, but also the water supply industry is willing to adopt a valve.
- Q: Yes, soft sealing gate valve can reach 25 kilograms, Fujian light valve company has this type of soft sealing gate valveAnonymous browsing | 28 times
- Soft seal butterfly valve seal is good, but can only withstand up to 16 pressure, or the plastic can not stand. A short period of time is OK, and it's also related to the workmanship and quality of the factory. The quality is poor.
- Q: Is the axial force and torque of the wedge gate valve the same?
- B higher temperature. C nice wedge single gate valve is suitable for high temperature medium easy to coking. Flexible gate valve features: high temperature, a wedge type single gate valve in a special form. Comparison with wedge gate valve.
- Q: What are the standards for the execution of cast iron dark pole gate valves?
- Three, cast iron gate valve structure features:1.. The structure is simple and compact, the design is reasonable and novel, the rigidity of the valve is very good, the passage has a large flow area, the medium is unimpeded, and the resistance is small;2., the sealing surface of the material selected carbide and stainless steel, has a reliable sealing performance, long service life;3. cast iron dark rod gate valve using graphite material for packing, easy to operate;4., can use a variety of driving methods, such as manual, electric, pneumatic, gear drive, etc.;5., the position of the two sides of the gate valve is symmetrical, so the medium can flow freely on both sides, and the installation is very convenient;6. cast iron hidden rod gate valve structure length is short, the quoted manufacturing process is good, the scope of application is very wide;
- Q: Why does the centrifugal pump start and stop in the case of closing the gate valve?
- The centrifugal pump starts and stops in the case of closing the pump outlet valve. Start off the pump outlet valve is to reduce the starting current, stop when the pump is closed, the outlet valve is to reduce water hammer, prevent blade from bad.
Send your message to us
NON-RISING STEM WEDGE GATE VALVE DN40-DN600
- Ref Price:
-
$10.00 - 100.00
/ pc
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 9999 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
