LED Constant Current Driver High Efficiency 95%,12V30W, 24V60W,DCCP6060DPR
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Descriptions:
The DCCP-DPR series is designed for LED indoor and outdoor lighting application condition, such as road lighting, landscape lighting and billboard lighting etc. It has the feature of high efficiency, high control accuracy, portable volume and fully waterproof design. The load control mode can be set freely.
Features:
· Wide input voltage range:
DC9.5V—DC33V, compatible with 12V/24V full voltage range
·Input surge suppression function. Peak surge current is less than 15Amps
·Digital high precision constant current control and the control accuracy are better than ± 2%
·Max. conversion efficiency is 95%
· Adjustable rated output current in the rated power and current range
· Triangular timers output control , and dual exact timers output control ,and the output parameters can be programmed at each timer
· The RS232 serial port (TTL) for connection via the open standard Modbus protocol
· Fully encapsulated design, IP67 protection
Electronic protections:
· Load overload
· Overheating
· Input reversed polarity
· Load short circuit
Load control mode:
· Remote manual control (Default ON)
· Three time interval control
· Clock time control
Specification:
Model | DCCP6060DPR |
Nominal system voltage | 12 / 24VDC |
Input terminal voltage | 9.5V~33.0V |
Rated output power | 30W/12V , 60W/24V |
Rated output current | 2.0A |
Load current | 60W/Load voltage |
Max efficiency | 93%/12V; 95%/24V |
Output voltage range | Exceed voltage of input and < 60.0V |
Load open circuit voltage | 60.0V |
Power output adjustment time | <10s |
Self-consumption | ≤8.5mA(12V); ≤11.0mA(24V) |
Control accuracy | ±2% |
Communications | RS232(TTL) |
Enclosure | IP67 |
Overall dimension | 106x60x21mm,4.17x2.36x0.83inches |
Mounting holes | 100(3.94) mm/inches |
Power cable | 1.0mm2 |
Net weight | 0.23kg |
Working temp. | -35℃~+55℃ |
Storage temp. | -35℃~+80℃ |
Humidity | ≤95% (NC) |
- Q: The whole circuit is powered by a low voltage, insufficient current supply (for example, LED current is small, brightness is not enough, after amplification work properly), so how to use triode to enlarge?
- In a common emitter circuit, the simple point is to control the large Ic with a small Ib. The current magnitude of the load is Ic, which is opposite to the phase.
- Q: Dell 1420 uses other people's HP charger charging, found that the socket is the same, can you, will damage the machine? Please expert advice
- HP power supply voltage is less than the original DELL 0.5 V, the problem is not too largeRated power supply current is much more, this is completely satisfied.Now that the machine is plugged in, the polarity of the sleeve should be correct. If reverse, the power or notebook two will have a protection, not the screen to brighten.
- Q: Computer host power can be disassembled to do other power use? How to connect?
- Connection method:ATX power supply, 20 pin output voltage and function definition tablePin name color description1.................. 3.3V orange +3.3VDC2.................. 3.3V orange +3.3VDC3.................. COM black Ground4.................. 5V red +5VDC5.................. COM black Ground6.................. 5V red +5VDC7.................. COM black Ground8.................. PWR_OK gray PowerOk (+5V&+3.3Visok)9.................. 5VSB purple +5VDCStandbyVoltage (max10mA)10.................. 12V yellow +12VDC11.................. 3.3V orange +3.3VDC12.................. -12V blue -12VDC13.................. COM blue Ground14.................. /PS_ON green PowerSupplyOn (activelow)15.................. COM black Ground16.................. COM black Ground17.................. COM black Ground18.................. -5V white -5VDC19.................. 5V red +5VDC20.................. 5V red +5VDC
- Q: My laptop power supply is good and bad. If the output voltage is the same, the output current is almost the same. Can the non notebook power supply instead of the notebook power supply?
- In theory, no problem if the input power is equal. The problem is that you might as well buy a dedicated one for the unstable power supply that you work with, and it saves effort and safety. You said so?
- Q: Can the motherboard closed at the same time and starts the 2 power supply when I stay alone like CD-ROM boot directly on the chassis key at the same time start time 2 power down and turn off the 2 power so you need to connect??
- A computer can use 2 or more ATX power supplies, as long as you can hold their location in the case. Connect the line of PS_ON power ATX (green) in parallel, control the power supply starting by the host switch, and connect a ground wire (black) of each power supply in parallel.
- Q: Machine power I have a 180W I want to put the independent power it used to do my computer water cooling system is connected to the first after I have no electricity out of 12V or 24 is not my power is absolutely fine. Just don't know when the 220V electric power supply in how to manually open the power?????
- It's the same. They're all standard sockets.Please refer to it. I hope I can help you.
- Q: What is the volt power used in South Africa (home use)? How do you like it?
- Australia 240V 60HZ three eight type voltage stability, no power into the TV, VCR for PAL systemNew Zealand 220V eight character type power supply stablePapua new Guinea 240V three flat type power supply is not stableFiji 220V three pass power supply is said to be stable
- Q: Can mobile phone batteries be replaced by other power sources? Deep technology, please
- If not detected, it may be illegal batteries (not genuine, non original batteries), it is possible that the battery does not give the mobile phone power supply, that is the reason.
Send your message to us
LED Constant Current Driver High Efficiency 95%,12V30W, 24V60W,DCCP6060DPR
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot Searches
Related keywords