Kyocera Solar Mono Panels (10w-25w)
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT
- Min Order Qty:
- 1 pcs watt
- Supply Capability:
- 100000/month watt/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Solar Mono panels(10W-25W)
Introduction of Solar Mono panels(10W-25W)
CNBM Solar photovoltaic (PV) Panel is designed for large electrical power requirements. It is the optimal choice for both on-grid and off-grid power systems. CNBM Solar panel offers high performance of power per square foot of solar array. Monocrystalline silicon(c-Si): often made using the Czochralski process. Single-crystal wafer cells tend to be expensive, and because they are cut from cylindrical ingots, do not completely cover a square solar cell module without a substantial waste of refined silicon. Hence most c-Si panels have uncovered gaps at the four corners of the cells.
Characteristics of Solar Mono panels(10W-25W)
I Solar Cell : High efficiency crystalline solar cell. Even if under the weak light, the solar module can produce maximum power output.
II Tempered glass (toughened glass): Anti-reflecting coating and high transmission rate glass increase the power output and mechanical strength of solar module.
III EVA and TPT: Using high quality EVA and TPT to prevent destroying and water.
IV AI frame: Without screw, corner connection. 6 holes on the frame can be installed easily.
V Junction box: Multi function junction box with water proof.
VI Long lifetime: ≥25 years; Less power decrease.
VII Good performance of preventing from atrocious weather such as wind and hails.
VIII Resisting moisture and etching effectively, not effected by geology.
Standard Test Conditions of Solar Mono panels(10W-25W)
The opto-electrical specifications shown below are stabilized values being measured at Standard Test Conditions, Irradiance: 1000W/m2, Spectrum: AM1.5 at 25°C, The info below is subject to manufacturing tolerances. Where appropriate minutes of measurement are available and are used for the dimensioning of the installation.
Advantages of Solar Mono panels(10W-25W)
• CNBM Solar performance guarantees for 25 years
• 2 years guarantee for workmanship
• Timeliness of delivery
Delivery of Solar Mono panels(10W-25W)
• 120 piece per pallet
• 22 pallets per container
CNBM International Corporation's products including Monocrystalline Solar Panel, Polycrystalline Solar Panel have received and enjoyed famous reputation in many countries and regions in the world .As a solar panel supplier in China, we strive to provide our customers with excellent service, superior products and unmatched value.
Characteristics of Solar Mono panels(10W-25W)
Max Power Voltage Vmp (V) | 17.6V | 17.6V | 18.0V |
Max Power Current Imp (A) | 0.57A | 1.14A | 1.39A |
Open Circuit Voltage Voc (V) | 22.2V | 22.2V | 22.6V |
Short Circuit Current Isc (A) | 0.62A | 1.24A | 1.49A |
Max Power Pm (W) | 10W | 20W | 25W |
Temperature Coefficient of Cells
NOCT | 47℃±2℃ |
Temperature Coefficients of Isc (%/℃) | 0.064 |
Temperature Coefficients of Voc (%/℃) | -0.33 |
Temperature Coefficients of Pmp (%/℃) | -0.45 |
Mechanical Data of Solar Mono panels(10W-25W)
Power | 10W | 20W/25W |
Dimension | 350×290×18mm | 650×290×18mm |
Weight | 1.3kg | 2.2kg |
Tolerance | ±0.5W | ±3% |
The dimension of the modules can be changed according to the demand of clients
Limits of Solar Mono panels(10W-25W)
Operating Temperature | –40 °C to +85°C |
Storage Temperature | –40 °C to +85°C |
Max System Voltage | 700V |
Guarantee of Solar Mono panels(10W-25W)
Products Guarantee | 2 yrs free from defects in materials and workmanship |
Performance Guarantee | No less than 90% within 10yrs and no less than 80% within 20yrs |
Certificates | IEC, ISO, TUV, CE |
The Professional Production Line of Solar Mono panels(10W-25W)
The Professional Production Line of Solar Mono panels(10W-25W)
- Q: What is the purpose of solar panels?
- The purpose of solar panels is to convert sunlight into usable electricity, providing a clean and renewable energy source for various applications such as powering homes, buildings, and even vehicles, while reducing dependence on fossil fuels and mitigating environmental impact.
- Q: Can solar panels be used in areas with high humidity?
- Yes, solar panels can be used in areas with high humidity. While high humidity may affect the efficiency of solar panels to some extent, they can still generate electricity. The performance of solar panels in humid environments can be optimized by using materials that are resistant to moisture and by ensuring proper installation and maintenance.
- Q: I need to find a way to clean solar panels that automated, at best;A way beside using a large 'squeegee'
- Automating okorder /
- Q: I have a panel that quot;deep breatheproduces at 4% efficiency, what can it power, It's about 4ft by 2ft
- Area is 4' * 2' * (0.3048m/ft)^2 = 0.743m^2. Incoming solar (assuming optimally oriented panel) averages about kW/m^2, so 743W max gross. 4% efficiency yields 300W. Most panels are about 0% - 5% efficient, which is about W. In either case, figure about /2 the theoretical efficiency for about 2 hrs per day. so, you can run something from 50 to 50W about 2hrs per day. Too small for any appliance except maybe a laptop or light bulb. Panels typically make about 2V, not enough to run household stuff anyway. Normally panels are used to charge batteries, then an inverter takes power from the battery to run your appliances. Good luck!
- Q: (For a project)I know they are made of silicon, but I want to EVERYTHING they are made of. Ex Metal (What kind)Please tell me everything used from their production to the finished projectThank you
- Solar panels are slabs of semi-conductor metal. Technically speaking, they are a slab of silicon semi-conductor doped or added with impurities to make it a better conductor. Solar panels could also be made of Gallium Arsenide which is a semi-conductor metal exclusively used in photo-voltaic cells.The silicon slabs are polished and glossed before doping. After processing, for protection, a thin glass layer is embossed on the solar cells slab. Silicon also is shiny and reflects about 35% of sunlight. Hence, an anti-reflective coating is usually applied over the slabs to reduce the amount of sunlight lost.
- Q: I have 2 20 watt Solar panel. I have it hooked up to solar controller and batteries to inverter. Am trying to figure out how much watts am getting. I found the voltage but how do I find the amp reading on a mutimeter?
- It is possible your meter does not have the capacity to safely measure more than 300 milliamps which is too small to measure current output from solar panels. Assuming no losses in the system or components, if your meter does not have the capacity to measure 0 Amps, you will need to get one that does. Analogs are better than digitial for this. Most often the 0 Amp circuit of the meter has a discrete positive plug location for the positive test lead. Most have a common ground connection with the rest of the meter functions. If you are measuring current at the battery in the charge mode- Negative lead of meter goes to positive terminal of battery and positive lead of meter goes to the cable that was connected to the positive terminal of the battery. Since the Wattage is a nominal measurement, if you measure between the panel and controller, take measurement on one leg of the panel, as you want to measure the current with the loaded active circuit. Meter is oriented the same way as the measurement at the battery would be made above only this time the meter is between the panel and controller. At peak solar conditions, expect current to be measured at 2.5 to3 Amps or more per panel. Under optimal conditions your panel will have higher output than their ratings indicate. Open circuit can be close to 20 volts. Never short circuit the output of the solar panels. It is volts multiplied by amps that gives you Watts.
- Q: Can solar panels be used to power a train?
- Yes, solar panels can be used to power a train. Solar panels can convert sunlight into electricity, which can then be used to power various electrical systems on a train, including propulsion. However, the feasibility and effectiveness of using solar panels to power a train depend on factors such as the size and efficiency of the solar panels, train energy requirements, and the availability of sunlight.
- Q: Is it as simple as buying the panels, an inverter and plugging it into a wall-socket, assuming it would just send power back into the outlet and supplement my house's electrical usage, or... Is it not that simple?Remember, I'm talking about a SMALL system, and I don't care how little power it'd make, or how uneconomical it would be.
- For one thing, you would be trying to supplement the entire electrical grid. Same reason you must have a cut out relay for an emergency generator. Cause without one, you generator would be trying to power the whole regions electrical system. You could set up a solar system to just power specific things, like a gate opener, etc. But thy would have to be wired separate from the house a.c. electrical system.
- Q: i'm talking abt bulk panelling, how many MW do we get from km sq?
- Solar panels are being improved on a continuing basis. Price is coming down and performance is going up. Still, they are expensive. A panel roughly /2 X /2 meter runs about $00. It generates 0 watts of power. To make a panel km square would take 4000 of these at a cost of $400,000. They would generate 40,000 watts or 40 kw or 0.04 Mw.
- Q: Can we cover up solar panels on our house with regular siding?
- Strange question....most people now days are wanting to get solar panels and you are wanting to COVER them up. Are they not working? Have then removed before you put any siding in that area.
Send your message to us
Kyocera Solar Mono Panels (10w-25w)
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT
- Min Order Qty:
- 1 pcs watt
- Supply Capability:
- 100000/month watt/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
