High Quality Low Carbon Oak Wood Veneers 003
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1000 sq.m, m²
- Supply Capability:
- 400000 sq.m. Per Month m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General information of low carbon wood
|
Raw material |
Sawdust, corn-straw and tailing, can be recycled after using. |
|
Technology |
Utilizing molecular structure of crystalline-state solidification, shaping under normal temperature and pressure with low carbon emission. |
|
Installation |
Stitching, wet-sticking and dry-fasten connecting |
|
Character |
Favorable corrosion resistance, non-ignitable, water-proof, UV-resistant, high resistance to fire, water and insects. |
|
Lead time |
30 days after receiving buyer's original L/C or Prepayment |
|
Package |
Seaworthy Export Standard Wooden Pallet |
|
Four breakthroughs |
Comprehensive utilization of natural resources: Be recyclable, using sawdust, corn-straw and tailing as materials. The product can be recycled after using. |
|
Low carbon and energy saving in the course of production: Adopting the independent individual property’s technology, utilizing molecular structure of crystalline-state solidification, shaping under normal temperature and pressure with low carbon emission. | |
|
Environmental and healthy in the course of construction and using: Synthesized by natural inorganic raw materials, nontoxic, odorless and non-radiative simple installation, which could save energy cost and reduce and waste emission, raise efficiency and reduce erection time. | |
|
From nature, beyond nature: Full realization of the natural texture, high resistance to fire, water and insects. Do not rot or fade after long time usage. Super self-cleaning needs low maintenance cost. Vivid color and appearance provides a wide space to designers. | |
|
Six advantages |
Lower more than 50% cost, enhance building's performance to price ratio. |
|
Cutting at will, Fixing easy, Shorting project time. | |
|
Good performance in resistance to elements, corrosion-resistant ,resistance to termite, fire resistance and water-resistant, far from distortion and discolorations in 30 years. | |
|
Well self-cleaning, low cost in later maintenance: Don't need professional maintenance in 30s(Cleaning with water only), saving much cost. | |
|
Customize the color, showing individuation: Beyond 400 kinds of colors, designers could exhibit their imagination. | |
|
Compound with natural inorganic materials: Without formaldehyde and toluol, sustained releasing negative oxygen ion, forming nature oxygen bar. | |
|
Special specifications are available on customers' requirements. | |
Specification of low carbon wood
Standard: 3000mm(L)×1200mm(W)×15mm(T)
Standard length: 3000mm
Standard width: 120mm,150mm,200mm,300mm(including 3mm kerf width)
Standard thickness: 15mm
Technical information of low carbon wood
|
Density |
1.26g/m3 |
Folding strength |
10Mpa |
|
Dry-shrinkage rate |
0.05% |
Elastic modulus |
7211Mpa |
|
Wet expansion rate |
0.17% |
Shear strength |
3.5Mpa |
|
Screw holding capability |
121N/mm |
Coefficient of heat conductivity |
0.69(W(m·k)) |
|
Frost resistance |
Thaw-freeze cycle after 30 times, no slip crack and peeling off | ||
|
Unpermeability |
No drop appearing on the bottom after 24 hours. | ||
|
Impact strength |
3.3KJ/m2 | ||
Products exhibition of low carbon wood
Low carbon wood sheets with thin grain
Low carbon wood sheets with thick grain
Project picture of low carbon wood
- Q: Often, the processing of natural vines is done by slicing the method. The process flow is as follows
- The use of these saws to produce veneer, the board rate is high, the quality of thin wood is better, chopper machine is more efficient.
- Q: The Veneer dyeing quality requirements
- Quality requirements: the color is not bleaching, the whole batch of goods not more than three kinds of color, flat, humidity does not exceed 10%, no residue of chemicals, no smell.
- Q: Slicing of thin slices of wood
- Of the wooden side should be promptly placed in the paver before the wood temperature of the tank,
- Q: Technology veneer and natural veneer distinction
- This is the case all over the world. This is not to say. All understand. Technology veneer although there is no natural veneer texture naturally nice.
- Q: Wooden door with veneer ruled, pattern is produced by different cutting methods
- Rotary Cut - Install the logs in the center of the lathe, insert the knife at a slight angle, and then rotate the logs against the slicer to create a revolving veneer
- Q: What is veneer, please explain in detail
- its development is by leaps and bounds, the emergence of a large number of industry experts
- Q: What is the veneer panel
- It is a special way to exist the plywood, the thickness of 3mm, a good panel can even reach 5mm, but the market is mostly 2.5-2.8mm.
- Q: Different cutting processes of wood veneer
- Technology wood mainly to natural ordinary wood or artificial Planted fast-growing forest as raw material, processed and processed, and natural precious veneer similar ...
- Q: The Sliced ??veneer manufacturing process
- After the logs are put into the factory, the cuttings must first be cut in accordance with the required length,
- Q: What are the specifications for veneer?
- The price is usually longer and more expensive. The thickness of the thinest 15 silk, thick more than one hundred silk
Send your message to us
High Quality Low Carbon Oak Wood Veneers 003
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1000 sq.m, m²
- Supply Capability:
- 400000 sq.m. Per Month m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
